Terms: No trades. First firm "I'll take it" in thread or PM gets priority. PayPal goods only, I'll pay fees and US shipping by Priority Mail. I will do my level best to list any flaws, if you want more pictures PM or email me. I don't work at a desk and my phone is full of evil so there may be a delay in my responses. No trades.
Hankins Slim Chance Fighter #8 $SOLD
http://imgur.com/XK6vRWo
http://imgur.com/axGu3bJ
http://imgur.com/jvHFjku
http://imgur.com/ZD3Chid
From the maker
"Perfect sized carbon fiber scales jimping in all the right places and an ambidextrous hand made sheath to keep it Snug
American made materials used on this blade series
Hollow Ground with a Convex Point Blade is 4 ¾ tip to front of scales 9 ¼ OAL
Carbon Fiber scales attached Bolts
Profession HT by Phoenix Heat Treating using Salt bath RC 58-60
NP3 coating professionally applied by CTI Industries
Steel is .200 5160 for ease of Sharpening and Toughness"
In good condition. Two small scratches in the coating near the tip and a little discoloration along edge. Never used or sharpened. Here is a video of the maker pounding this model into a stump. Through a piece of scrap steel. http://www.youtube.com/watch?v=jD_g_B97Y9o If you need to stab something through a car door, this is your knife.
80CRV2 Dagger Grind with Fullers $SOLD
http://imgur.com/iyJ1rLO
http://imgur.com/NsKpUzN
http://imgur.com/4XDSPh6
http://imgur.com/BMcS5Us
http://imgur.com/oJGBEzF
From the maker:
"Knife has profile of camp knife and grind of a dagger, sharp on both edges with fuller like spear point. Blade is 6 1/2 in cutting edge 5 1/2 In handle with jimping and lanyard hole. The blade is made from 1/4 in thick and 2 in wide 80Crv2 steel with black micarta bolsters and Curley Purple Heart handle, held together by brass rivets and epoxy."
Never sharpened, carried, or used. Swedge grinds, fullers, and spine plunges are varying degrees of uneven as the pictures show. Would be a great user as it is a sharp slab of good steel, but it won't win any beauty contests. Comes with the sheath pictured, which for full disclosure reasons I have to say is awful.
Hankins Slim Chance Fighter #8 $SOLD
http://imgur.com/XK6vRWo
http://imgur.com/axGu3bJ
http://imgur.com/jvHFjku
http://imgur.com/ZD3Chid
From the maker
"Perfect sized carbon fiber scales jimping in all the right places and an ambidextrous hand made sheath to keep it Snug
American made materials used on this blade series
Hollow Ground with a Convex Point Blade is 4 ¾ tip to front of scales 9 ¼ OAL
Carbon Fiber scales attached Bolts
Profession HT by Phoenix Heat Treating using Salt bath RC 58-60
NP3 coating professionally applied by CTI Industries
Steel is .200 5160 for ease of Sharpening and Toughness"
In good condition. Two small scratches in the coating near the tip and a little discoloration along edge. Never used or sharpened. Here is a video of the maker pounding this model into a stump. Through a piece of scrap steel. http://www.youtube.com/watch?v=jD_g_B97Y9o If you need to stab something through a car door, this is your knife.
80CRV2 Dagger Grind with Fullers $SOLD
http://imgur.com/iyJ1rLO
http://imgur.com/NsKpUzN
http://imgur.com/4XDSPh6
http://imgur.com/BMcS5Us
http://imgur.com/oJGBEzF
From the maker:
"Knife has profile of camp knife and grind of a dagger, sharp on both edges with fuller like spear point. Blade is 6 1/2 in cutting edge 5 1/2 In handle with jimping and lanyard hole. The blade is made from 1/4 in thick and 2 in wide 80Crv2 steel with black micarta bolsters and Curley Purple Heart handle, held together by brass rivets and epoxy."
Never sharpened, carried, or used. Swedge grinds, fullers, and spine plunges are varying degrees of uneven as the pictures show. Would be a great user as it is a sharp slab of good steel, but it won't win any beauty contests. Comes with the sheath pictured, which for full disclosure reasons I have to say is awful.
Last edited: