INFI!!! Old and New Models!

Status
Not open for further replies.
Feedback: +200 / =0 / -0
Joined
Jan 18, 2017
Messages
1,841
Sales only please!

Price as listed is the cost to your door (TYD). These are cross-listed and time stamps will be used to determine buyer order.

Terms and conditions: Please post an "I'll take it" message to the thread, followed with a Private Message. If you don't have PM privileges, please post your e-mail address in the thread (and delete your e-mail after I respond.) Please don't post an "I'll take it" unless you unequivocally agree to the terms of sale noted in this post. Attempt at payment must be made in good faith within 24 hours of claiming an item or I will move on to next buyer. Prices listed are the cost to your door via UPS Ground. I will pay for signature delivery at your request. Extra insurance also available if you will cover the charges. PayPal or Venmo only. I RESERVE THE RIGHT TO DENY SALE FOR ANY REASON.

Contiguous 48 US states buyers preferred, Alaska, Hawaii, and International buyers considered. If you live outside of the lower 48 US states and would like to buy a knife, please contact me directly before posting an "I'll take it."

1. Busse Combat Jackhammer
$575 TYD
Oh-so-cool CBT INFI with false edge up top and rare Smog G10 scales. Has been stripped and lightly used and carried. Logo was not etched but still shows faintly. Edge has been stropped and is in great condition with no defects. Sorry, no sheath.
CjkSjB0.jpg

hi5bBU5.jpg


2. Busse Combat Nano Fusion Natural Outlaw
$450 TYD
From Jerry's announcement thread: "Here's a killer cool blade that falls right between the Ergo Natural Outlaw and the SF Natural Outlaw. The NFNO sports a 6 1/2" blade for ease of carry and has been coupled with the wildly popular Nano Fusion handle. The NF Natural Outlaw screams for whatever abuse you deem necessary to survive the worst that mother nature can throw at you along with any and all rigors of the battlefield."

This one comes with BIG Satin finished INFI and black G10 scales. Unused, but minor shelf/handling wear. Still looks and feels great. Sorry, no sheath.
FRxeUPz.jpg

sGX7FJX.jpg


3. Busse Combat Forsaken Steel Heart
$500 TYD
From Jerry's announcement thread: "INFI allows us to offer the other original clipped point blade design with the much pointier tip! We have now fused the straight clipped blade of "the Steel Heart that got away" (Forsaken) with the all new Nano Fusion handle! Couple this with the CBT (Corrugated Bevel Technology) and you are witnessing the birth of a new, soon to be legendary Busse Combat blade!!!"

This one comes with BIG Satin finished INFI and black G10 scales. Looks to have been resharpened--great edge with a mirror polished finish. I think the previous owned must have used one of the guided systems, like a Wicked Edge or similar. Also comes with a very well-made black kydex sheath (very secure--no rattle) by an unknown maker.
cWFRkMA.jpg

JbPGc3f.jpg

lA3TExR.jpg


4. Busse Combat Killa Zilla Proto (1 of 4)
$625 TYD (SOLD)

A rare and massive INFI BEAST of a blade! This sucker has been stripped and probably lightly used by previous owner, but the edge shows no damage at all. There is some decarb clinging to it. I purchased this with the intention of cleaning it up and mauling logs with it but instead you have a chance to do that. Comes with black G10 scales and a really great open-spine Buy Brown kydex sheath w/tek-lok.
HzkfyOE.jpg

O9yIsDB.jpg

XGKsmKv.jpg
 
Last edited:
5. Busse Combat Team Gemini Light Brigade
$725 TYD
This is a Light Brigade, (as in: not an Ultra Light Brigade such as the one pictured below). Was a Busse-done competition finish (not stripped) with INFI steel and black canvas micarta scales. The scales were bead-blasted to make it grippier. Otherwise, minus a bit of handling wear, it is as it would have come from the factory. I believe this is one of the thinner-ground variants, (TGLBs were released in a few runs with the tooling adjusted at some point for a slightly thinner grind) so it should slice very well. Also comes with the pictured Patriot Leather Sheath, which is really outstanding and has croc-skin inlay. I'm into this for about $1,000 with sheath and blade combined.
RWam3hM.jpg

mqOdjMX.jpg

04Nki4h.jpg


6. Busse Combat Team Gemini Ultra Light Brigade
$427 TYD (SOLD)
This is an Ultra Light Brigade, (as in: not a Light Brigade such as the one pictured above). Black-coated INFI steel and green canvas micarta scales. Priced to the same cost as direct from Busse, but I'm also paying shipping and throwing in a custom Azula leather sheath. I'm the original owner of this one and it will come to you in unused/like new condition.
MClku2i.jpg

8fdNH3q.jpg

OqV12mI.jpg


7. Busse Combat Team Gemini 14
$750 TYD
This is one of only two or three Ban Tang TG14 regrinds. INFI blade has been given a clip point and incredible full-height convex regrind. The pommel was reduced to address balance after material from the blade had been removed. Hasn't been used and looks great, thought there is some minor handling/sheath insertion wear. Also comes with a beautiful Armorall Leather sheath (love the distressed leather look) which matches the tan canvas micarta scales wonderfully.
YgQryce.jpg

05hmxhj.jpg

Ubz5AkF.jpg


8. Busse Combat SARsquatch and SAR 3 w/Modular Chuddy Bear Sheaths
$1,050 TYD
So much to say about this set--and yes please do consider it a set. Selling the whole set for at least $200 under what I have into it (Probably more like $300 :oops:). Both blades are obviously made from INFI. The 'Squatch has been reground by Josh of Razor Edge Knives. From previous sale thread:
  • Reground & Satinized <600 grit>
  • Atom-splitting, scary sharp convex edge
  • UNUSED besides testing with copy paper since optimization
  • Black canvas Micarta handles were sandblasted clean and fresh
  • Flared tubes drilled out by Josh & replaced with stainless Torx to make handles removable
It still hasn't been used since the custom work was done, but has a single teeny, tiny spot of discoloration near the swedge on the show side. Otherwise it's in ace shape. Thickness measures 0.17" on my calipers. The handle slabs look to be black linen micarta (edit: according to the last sale thread for this knife, they are canvas, not linen, but the fibers look super tight for canvas as you can see for yourself!) Awesome feel and great pattern.

The SAR 3 (pretty sure it's an LE, but not 100% sure it isn't an SE) is factory satin with black paper micarta scales. It's in great shape, but does look like it may have been sharpened (quite well, if so!); otherwise I would have thought it was unused. 0.15" stock thickness on my calipers. Can be carried as a piggyback on the 'Squatch's dangler, or separately by itself.

The sheath is leather from Chuddy Bear and as mentioned above, the SAR 3 can go piggyback or solo, while the main rig has a couple extra kicks that are perfect for survival gear. My Scorpion Streamlight fits perfectly into either side, for example. Despite some very minor handling wear, this rig is in excellent condition! Chuddy doesn't take orders any more and Josh's books are closed, so you will never seen another rig like this!
cPCYE9E.jpg

za8Igpp.jpg

bDhtRyO.jpg

jNI7opm.jpg

IMbPOxC.jpg

vH4faLc.jpg

hCQ7nra.jpg

708eDnx.jpg

ZpJ29da.jpg


Thanks for looking!
 
Last edited:
Status
Not open for further replies.
Back
Top