Info needed on model identity.

relodr36

relodr36

Joined
Oct 26, 2005
Messages
491
I'm relatively new to this forum and I've picked up a lot of good information already,but maybe somebody can tell me what model/models I should be looking for.
As I said in my first post,I've been carrying the 34OT for many years.However,for skinning small game and small furbeares,I prefer the pen blade.Did Schrade ever make a 3-blade folder about 3-4" long with a master clip.pen, and (spey or sheepsfoot) blades in carbon steel?
Thanks,fella's!
Ron
 
Take a look at the pictures I just posted for Penney over in the 165 thread. Bottom right on the 1st pict is a 58OT. Blade configuration is what you wanted and its about the same size at the 34. The 897UH is a bit bigger and also has the same blades your looking for.
Hope that helps
TTYL
Larry
 
Love those 897's, but they are stainless. With clip, spey and sheepfoot like the 58OT. The same with the 896K. The 72OT dogleg jack is 2 7/8" and has one clip and one pen. The 33OT Middleman Jack is the same size as the 34OT and has just two blades, a clip and pen. The little 104OT Minuteman with 2 3/4" length has a clip and pen, and the 108OT adds a third blade, the sheepfoot. That is all the OT's I can think of right now with pen blades. Schrade did make open stock knives with pen blades though. You might look at those, but you might also find a trapper version more to your liking. They have been favorites of small game hunters for many years.

Codger
 
Thank you both for the info.
That lady sure has some nice knives.
Now I have a couple model #'s,I wont have to wade thru all those eBay ads.
I don't have any experience with Schrade's stainless blades but I've had some Case stainless that took more time to restore an edge than their old high carbon steel blades did.That's why I switched to Schrade's back in the late 70's.I have a tendency to use my "carry knife" to cut anything that needs cutting,so I like the carbon steel.You can restore an edge easily with some 240X AlumOxide paper and a Washita stone.
I have a new 104OT that I found a the local Kmart about 3 weeks ago.I've also found that as you get older and your fingers are stiffer,you appreciate a larger knife than you did previously.
 
I have been using an 897UH as an EDC for quite a few years now, and you would not believe what I put them through. I also prefer 1095 HC in my hunting blades, but my 897 gets a real workout in my construction business, and a daily sharpening with a fine diamond hone, then a bit of stropping keeps it in fine shape without excessively removing metal. They were made for many years and are pretty common right now, so you can pick up a new or near mint one for chicken feed. My chicken feed bill is about $15-20 a week, so the analogy is pretty close. With the blade selection of Turkish clip, spey, and sheepfoot, it easily handles most tasks, and is large enough to not get lost in my pocket, but small enough to not overly excite any ladies who might pass by (veiled reference to an old Mae West line).

I hope we have been of some help. A handy Schrade reference book would help more. I have a lot of mine nearly memorized, but still double check myself because my wife claims I make mistakes, and that has shaken my self confidence. Who knows, someday she may be right! That means I need to get another good reference book (Levine's #4 I think).

Codger
 
I find the old Schrade catalogs & price lists make a good reference, but are limited to a single year. If a person compiles them that helps.
There was a thread where 2 or 3 people listed the different models of Schrades. I can't seem to find the thread right now. Anyway I put them all on a spread sheet & that really helps me.

Brand Model # Details
Schrade 2OT Jack 3-1/2"; clip, pen; Schrade-Walden, smooth bone; fancy bolsters
Schrade 3OT Bearhead; 3"; drop point - lockback; SS blade
Schrade 5OT Bruin; 3-3/4"; drop point - lockback
Schrade 5OTG Green Bruin; 3-3/4"; drop point - lockback has SS blade
Schrade 6OT Golden Bear; 5"; clip - lockback; SS blade, no rear bolster
Schrade 7OT Cave Bear; 5"; clip - lockback
Schrade 8OT Senior; 4"; clip, sheepfoot, spey; Also Keen Kutter and Yellow (Frontiersman) models
Schrade 9OT Golden Claw; 5"; spear with gut hook - lockback
Schrade 10OT Barlow; 3-3/8"; clip, pen; Ulster (Prince Albert offer)
Schrade 12OT Pal; 2-7/8"; clip; also thought to be Ulster 2 bld Barlow for Euro market 1964-1965 with 12OT model no.
Schrade 13OT Trailblazer
Schrade 14OT Timberline
Schrade 15OT Deerslayer
Schrade 18OT Mighty Mite; 2-3/4"; clip - liner lock
Schrade 24OT X-Timer black & gold- 2 blade
Schrade 25OT Folding Hunter; 5-1/4"; clip, skinner
Schrade 33OT Middleman Jack; 3-5/16"; clip, pen
Schrade 34OT Middleman; 3-5/16"; clip, sheepfoot, spey; also Yellow (Plainsman) model
Schrade 36OT Saddleman; 3-5/16"; clip, sheepfoot, punch (also as Skoal)
Schrade 41OT Maverick "bird and trout" pattern fixed blade (prod-'71, '72, '73)
Schrade 43OT Pocket Beast; 3-7/8"; clip - liner lock
Schrade 44OT Workmate; 3-5/16"; clip, sheepfoot, spey, Wharncliffe; special run?
Schrade 47OT Beast; 4-7/8"; clip - liner lock
Schrade 49OT Rhino; 4-7/8"; clip w/ gut hook - liner lock
Schrade 50OT Utility; 3-5/8"; spear, punch, etc.; aka Scout or Camp, Ulster (Prince Albert offer), tang not marked with model no.
Schrade 51OT Big Timer ; 4-3/4"; spear - lockback; aka Sunfish / Bulldog
Schrade 53OTG (Bearhead) Blade lifter; 3"; drop point - liner lock; thumb stud, green handle
Schrade 55OTG (Bruin) Blade Lifter; 3-3/4"; drop point - liner lock; thumb stud, green handle
Schrade 58OT Whittler / Stockman; 3-1/4"; clip, pen, spey; Ulster (Prince Albert offer); Keen Kutter (no tang stamp)
Schrade 60TX X-Timer silver
Schrade 60TXG X-Timer Green
Schrade 61OT Slim Premium Stock; 4"; clip, sheepfoot, spey
Schrade 70TXBU X-Timer blue
Schrade 72OT Dog leg jack; 2-7/8"; clip, pen; peanut really
Schrade 77OT Improved Muskrat (small game) ; 3-7/8"; 2 Turkish clip;
Schrade 89OT Blazer 4"; clip, serrated sheepfoot, spey
Schrade 93OT Wrangler; 3-9/16"; clip, sheepfoot; SS blades
Schrade 94OT Trapper; 3-7/8"; clip, spey
Schrade 96OT Bearhead Trapper; 4-1/8"; clip, spey, pick, tweezers
Schrade 97OT Buzzsaw Trapper; 4-1/8"; clip, saw, pick, tweezers
Schrade 98OT Ramrod; 3-9/16"; Turkish clip, sheepfoot, spey; SS blades
Schrade 104OT Minuteman; 2-3/4"; clip, pen
Schrade 106OT Grandad's; 2-3/4"; clip, pen, scissors
Schrade 108OT Junior; 2-3/4"; clip, sheepfoot, pen
Schrade 123OT Pioneer; 4"; clip;
Schrade 124OT Pioneer; 4"; clip; has SS blades
Schrade 125OT Mustang; 5-1/4"; clip - liner lock
Schrade 126OT Mustang; 5-1/4"; clip - liner lock; has SS blades
Schrade 140OT Trail Boss-Lg fix blade clip point w/ cordura sheath
Schrade 141OT Outfitter green (also in blue)
Schrade 142OT Guidemaster- clip point w/ cordura sheath
Schrade 143OT Blade Runner; w/ gut hook
Schrade 146OT Minimum Flex
Schrade 147OT Pro Fisherman; fillet knife (maroon)
Schrade 152OT Sharp Finger
Schrade 154OT Drop Point Hunter
Schrade 156OT Lit’l Finger
Schrade 158OT Guthook Skinner
Schrade 160OT Mountain Lion
Schrade 165OT Woodsman
Schrade 175RB Florist knife
Schrade 194OT Gunstock Trapper; 3-7/8"; clip - liner lock
Schrade 225OT Son of a Gun; 5-1/4"; clip, saw
Schrade 296Y Yellow Trapper; 4-1/8"; clip, spey
Schrade 246OT Maximum Flex
Schrade 498 Fix blade w/ brass cap & guard; leather ring handle
Schrade 858 Lumberjack; 4-1/2"; clip, sheepfoot, spey

I added a few that I knew about, but I am SURE the list is not all inclusive. It might be a good place to start though. If anyone has some to add please feel free. I for one would find it helpful. LT, Codger, Irv, anyone else, please feel free to correct/add to/ delete from ect. this list. I am not an authority, that is why I found the list helpful.
The list doesn't include any of the newer (less traditional stuff) like the XT series, Cliphangers, SX, SS, SP or SQ series, ect.

Hope this is helpful,
Dale
 
Thanks Dale. I started doing that and worked my fingers to the bone. Then I found...duh! Robert Clemente did all that! He went further too, and wrote a book on the compilation of the Schrade catalogs. It is the first resource I recommend to new (and increasingly serious) collectors interested in the OT and UH lines. His contact info is back in the Gulf Coast Assistance thread. Someone will fetch it forward by link if you can't find it.

Codger
 
A question for those more knowledgeable than I; Did Schrade ever male a 91OT? Somewhere I got that number and am not sure if it is a good number. I have not been able to find anything on it.
LT, Codger, Irv, anyone????
 
Orvet,
Aint seen a 91OT.
How about a 19OT. We talked about them and the 512OT's as well.

Nice list.

Gonna add the UH's?

TTYL
Larry
 
Thanks Irv.
Yes, I want to add the UH.
Right now I am working on the other stuff in the price lists I have, which are the 2002 & 2004. I have quite a few knives that aren't in either of those price lists & I am adding those as well. Of course I keep running into things that don't seem to fit, especially some of the stuff that has appeared since the close of Schrade. I am with Codger on that non-typical stuff, I find it to be quite interesting.
I would also like to put together a list of the Imperial stuff as well and a list of tools.
I am sure this will take me quite a while to do. If anyone has price lists they would like to share (other than 2002 & 2004) they can scan them & send them to me at dalervincent@comcast.net . I would like to put together the most complete list we can get for our use here on the forum. With a price list I can also include the MSRP of the knife, something I am adding into the list I already have.

I hesitated to include the price on the first list as some ebay seller might start raising the asking price on some of their auctions.
Do you think it is advisable to post the prices?
Feed back on this issue anyone?
 
Thanks,Codger - for your insight and comments.I guess I'll probably get Clemente's book and end up hooked deeper! Did your daughter get you another test specimen ?
As I remember, bear make better test specimens than deer.The hide is tougher and the hair usually has embedded sand/dirt that really takes the edge off a knife.Skinning out the paws and ears really test a guy's patience.
Thankfully,the opportunity only comes every 15-20 years.
Beaver is another toughie on an edge,have to cut all the way instead of peeling most of it.

Orvet,
Thanks for the list! Sure will save me some time!

Ron
 
OK, here is what I have come up with for model numbers & description as best as I could get it. I used the Schrade 2002 & 2004 price lists & the 1999 catelog for the some of the model numbers & descriptions. I didn't get any feed back about listing the retail price (for those 2 years) so I left it off.
This list is far from definitive! Please feel free to add to/take from it as you find new info.
Thanks,
Dale

Brand Model # Details
Schrade 2OT Jack 3-1/2"; clip, pen; Schrade-Walden, smooth bone; fancy bolsters
Schrade 3OT Bearhead; 3"; drop point - lockback; SS blade
Schrade 5OT Bruin; 3-3/4"; drop point - lockback
Schrade 5OTG Green Bruin; 3-3/4"; drop point - lockback has SS blade
Schrade 6OT Golden Bear; 5"; clip - lockback; SS blade, no rear bolster
Schrade 7OT Cave Bear; 5"; clip - lockback
Schrade 8OT Senior; 4"; clip, sheepfoot, spey; Also Keen Kutter and Yellow (Frontiersman) models
Schrade 9OT Golden Claw; 5"; spear with gut hook - lockback
Schrade 10OT Barlow; 3-3/8"; clip, pen; Ulster (Prince Albert offer)
Schrade 12OT Pal; 2-7/8"; clip; also thought to be Ulster 2 bld barlow for Euro market 1964-1965 with 12OT model no.
Schrade 13OT Trailblazer
Schrade 14OT Timberline
Schrade 15OT Deerslayer
Schrade 18OT Mighty Mite; 2-3/4"; clip - liner lock
Schrade 24OT X-Timer black & gold- 2 blade
Schrade 25OT Folding Hunter; 5-1/4"; clip, skinner
Schrade 33OT Middleman Jack; 3-5/16"; clip, pen
Schrade 34OT Middleman; 3-5/16"; clip, sheepfoot, spey; also Yellow (Plainsman) model
Schrade 36OT Saddleman; 3-5/16"; clip, sheepfoot, punch (also as Skoal)
Schrade 41OT Maverick "bird and trout" pattern fixed blade (prod-'71, '72, '73)
Schrade 43OT Pocket Beast; 3-7/8"; clip - liner lock
Schrade 44OT Workmate; 3-5/16"; clip, sheepfoot, spey, Wharncliffe; special run?
Schrade 47OT Beast; 4-7/8"; clip - liner lock
Schrade 49OT Rhino; 4-7/8"; clip w/ gut hook - liner lock
Schrade 50OT Utility; 3-5/8"; spear, punch, etc.; aka Scout or Camp, Ulster (Prince Albert offer), tang not marked with model no.
Schrade 51OT Big Timer ; 4-3/4"; spear - lockback; aka Sunfish / Bulldog
Schrade 53OTG Bearhead EXT- (Blade lifter); 3"; drop point - liner lock; thumb stud, green handle
Schrade 55OTG Bruin EXT- (Blade Lifter); 3-3/4"; drop point - liner lock; thumb stud, green handle
Schrade 58OT Whittler / Stockman; 3-1/4"; clip, pen, spey; Ulster (Prince Albert offer); Keen Kutter (no tang stamp)
Schrade 60TX X-Timer silver
Schrade 60TXG X-Timer Green
Schrade 61OT Slim Premium Stock; 4"; clip, sheepfoot, spey
Schrade 70TX X-Timer 5 in.- Gun Metal Gray
Schrade 70TXB X-Timer 5 in.- Midnight Black
Schrade 70TXG X-Timer 5 in.- Emerald Green
Schrade 70TXBU X-Timer 5 in,- Royal Blue
Schrade 72OT Dog leg jack; 2-7/8"; clip, pen; peanut really
Schrade 77OT Improved Muskrat (small game) ; 3-7/8"; 2 Turkish clip;
Schrade 89OT Blazer 4"; clip, serrated sheepfoot, spey
Schrade 93OT Wrangler; 3-9/16"; clip, sheepfoot; SS blades
Schrade 94OT Trapper; 3-7/8"; clip, spey
Schrade 96OT Bearhead Trapper; 4-1/8"; clip, spey, pick, tweezers
Schrade 97OT Buzzsaw Trapper; 4-1/8"; clip, saw, pick, tweezers
Schrade 98OT Ramrod; 3-9/16"; Turkish clip, sheepfoot, spey; SS blades
Schrade 104OT Minuteman; 2-3/4"; clip, pen
Schrade 106OT Grandad's; 2-3/4"; clip, pen, scissors
Schrade 108OT Junior; 2-3/4"; clip, sheepfoot, pen
Schrade 123OT Pioneer; 4"; clip;
Schrade 124OT Pioneer; 4"; clip; has SS blades
Schrade 125OT Mustang; 5-1/4"; clip - liner lock
Schrade 126OT Mustang; 5-1/4"; clip - liner lock; has SS blades
Schrade 140OT Trail Boss- 10 3/4 in.- Lg fix blade clip point w/sheath- SAFE-T-GRIP
Schrade 141OT Outfitter 9 1/2 in.- w/Sheath SAFE-T-GRIP green (also in blue)
Schrade 142OT Guidemaster 9 1/8 in.- clip point w/Sheath- SAFE-T-GRIP
Schrade 143OT Blade Runner 9 1/2 in. w/Sheath- w/ gut hook- SAFE-T-GRIP
Schrade 146OT Minimum Flex filett knife- 12 1/2 in.- w/Sheath (as per 1999 catelog)
Schrade 147OT Pro Fisherman; 12 1/2 in.- w/Sheath- fillet knife- SAFE-T-GRIP (maroon, green & ?) listed as 13 1/2 in. in 1999 catelog
Schrade 152OT Sharp Finger 7 1/4 in. w/Sheath
Schrade 154OT Drop Point Hunter
Schrade 156OT Lit’l Finger
Schrade 158OT Guthook Skinner 7 1/4 in. w/Sheath
Schrade 160OT Mountain Lion
Schrade 165OT Woodsman
Schrade 175RB Florist- 3 3/4 in.
Schrade 194OT Gunstock Trapper; 3-7/8"; clip - liner lock
Schrade 225OT Son of a Gun; 5-1/4"; clip, saw
Schrade 296Y Yellow Trapper; 4-1/8"; clip, spey
Schrade 246OT Maximum Flex fillet knife 12 1/2 in. overall w/Sheath
Schrade 498 Fix blade w/ brass cap & guard; leather ring handle
Schrade 858 Lumberjack; 4-1/2"; clip, sheepfoot, spey

Schrade AV22 2 blade Avatar w/ black handle insert
Schrade AV7 Avatar Blue/Silver 1/2 serrated with pocket clip
Schrade AV77 Avatar Black/Silver 1/2 serrated with pocket clip
Schrade AV97B Avatar Black w/ black blade 1/2 serrated with pocket clip
Schrade BTO1 Schrade Extreme- 12 1/4 in. w/Sheath (1999 catelog)
Schrade CH1 Dynamo Cliphanger- 2 5/8 in. closed (1999 catelog)
Schrade CH3S Silhouette- Cliphanger -3 1/4 in. partially serrated lockback
Schrade CH4 Shadow Cliphanger -3 in. partially serrated lockback
Schrade CH4S Spirit Cliphanger- 3 1/4 in. closed, lockblade partial serrated (1999 catelog)
Schrade CH4FE Spirit Cliphanger- 3 1/4 in. closed, lockblade, Fine Edge (1999 catelog)
Schrade CH7S Viper- Cliphanger -4 1/2 in. partially serrated blade, Lockblade
Schrade CH8 Cliphanger- 4 1/2 in. full serrated clip blade
Schrade CH8S Eco-Edge Cliphanger 4 1/2 in. lockblade- partial serrated (1999 catelog)
Schrade CH14S Sportmate Jr.- Cliphanger- 3 1/4 in. partially serrated lockback w/ permanate pocket clip
Schrade CH18S Sportmate Serrated - Cliphanger- 4 1/2 in. partially serrated lockback w/ permanate pocket clip
Schrade CH18FE Sportmate- 4 1/2 in. plain blade, lockblade w/Clip (1999 catelog)
Schrade DBL2
Schrade GBDI Grand Dad Barlow engraved bolsters-circa 1982
Schrade GF45 LittlemouthGraphite fillet knife w/ grey plastic sheath
Schrade HS1 Honesteel w/ sheath
Schrade LB5 lockback
Schrade LB7 leather sheath- spring replaced @ factory appx 2003
Schrade SG7S Outback clip point w/ partial serration
Schrade SG8 Outback droppoint
Schrade SLW2 Lake & Walker 4 in. Tough Lock w/Pocket Clip
Schrade SP1 Nighthawk- 2 5/8 in. Lockback
Schrade SP2 Rader- 3 in. Lockback
Schrade SP3 Firebird- 3 3/4 in. Lockback
Schrade SP3 plain blade
Schrade SP7 5 in. floder w/ plain blade, drop point
Schrade SP8 5 in.- folder w/ gut hook- plain blade
Schrade SP12X Nighthawk X- 2 5/8 in.- lockback w/black blade (1999 catelog)
Schrade SP22X Raider X- 3 in. lockback w/black blade (1999 catelog)
Schrade SP32X Firebird X- 3 3/4 in. lockback w/Sheath, black blade (1999 catelog)
Schrade SPF1LTD Spitfire- G-10 Handles; ATS34 2 in. Blade; Easy 1 Hand use; Lock Mechanism (w/Titanium)
Schrade SQ247 4X4- Diamond Plate Handle, Pocket Clip, black blade
Schrade SQ312 Nitro- 4 in.- Gray Aluminum Handle, w/Gel Technology, Blackened Blade, Pocket Clip
Schrade SQ316 Nitro- 4 in.- Blue Aluminum Handle, w/Gel Technology, Pocket Clip
Schrade SQ421 Silhouette- 4 in.- Black Aluminum Handle, Black Blade
Schrade SQ423 Silhouette- 4 in.- Fire Engine Red Aluminum Handle, Sealed Shot Blast Blade
Schrade SQ424 Silhouette- 4 in.- Cobalt Blue Aluminum Handle, Natural Blade
Schrade SQ432S Silhouette- 4in.- Aluminum Handles, partial serrated blade
Schrade SQ447 4X4- Lockblade, Diamond Plate Handle, Pocket Clip, black blade
Schrade SQ586 XTAC (Extreme Tactical) 3 1/4 in. Drop Point, Blue Liner, Pocket Clip
Schrade SQ586T XTAC 3 1/4 in.- Tanto Blade, Blue Liner, Pocket Clip
Schrade SQ587 XTAC 3 1/4 in.- Drop Point, Natural Liner, Pocket Clip
Schrade SQ587T XTAC 3 1/4 in.- Tanto Blade, Natural Liner, Pocket Clip
Schrade SQ598 XTAC GOLD 3 1/4 in.- ATS 34 Blade, G10 Handle, Titanium Lining, drop point
Schrade SQ598T XTAC GOLD 3 1/4 in.- ATS 34 Blade, G10 Handle, Titanium Lining, tanto blade
Schrade SQ877 Cable Lock- 3 IN. Stainless Handle, Pocket Clip, One Hand Open
Schrade SS1 Simon- 3 in. Natural Blade & Handle
Schrade SS1AB Simon- 3 in. All Black
Schrade SS15 Simon- 3 in. Real Tree Camo Handle, Black Blade
Schrade SS16 Simon- 3 in. Black & Blue Marble
Schrade SS17 Simon- 3 in. Damascus Style Handle, Natural Blade
Schrade SS102RB Sampler- 4 11/16 in
Schrade SS105 Sampler- 5 3/4 in
Schrade SS627 2 blade gentleman's knife.
Schrade SW7FE Switch-it; 4 1/4 in.- plain edge- Lockback w/Rotating Clip (1999 catelog)
Schrade SW7S Switch-it; 4 1/4 in.- Partial Serrated Lockback w/Rotating Clip
Schrade SX4 Badger 4 in.- Lockblade, One Hand Open, Pocket Clip, (made in China)
Schrade SX4B Badger 4 in.- Lockblade, One Hand Open, Blackened Clip & Blade, (made in Ireland)
Schrade SX4S Badger 3 1/4 in.- Lockblade, One Hand Open, Pocket Clip, Serrated Blade, (made in China)
Schrade SX21 Badger 7 1/2 in.- Fixed Drop Point Blade w/Sheath
Schrade SX23 Fixed Skinning Blade w/ Sheath
Schrade TXR3 Texas Ranger 4 1/4 in Trapper- Staglon Handle
Schrade TXR4 Texas Ranger 3 9/16 in.- Trapper- Bone Handle, w/Sheath & Collector's Box, Ranger Badge Shield
Schrade WR1 Will Rogers Commemorative
Schrade WR1 Water Rat 7 3/8 in. Black Handle, Partially Serrated w/Sheath
Schrade WR10 Water Rat 7 3/8 in. Orange Handle, Partially Serrated w/Sheath
Schrade XT1B X-Timer- 11 3/4 in.- Camp Knife Fixed Blade
Schrade XT2B X-Timer- 9 1/8 in.- Drop Point Fixed Blade
Schrade XT3B X-Timer- 9 1/8 in.- Fat Boy Skinner Fixed Blade
Schrade XT7B X-Timer- 5 in.Handle Folder
Schrade XT4 9in.- Fixed Blade

100th ANNIVERSARY
Schrade A34OT Middleman 3 5/16 in.- 2 PC Embossed Tin, Anniversary Shield
Schrade ACB296 Schrade Classic, Bone Rope Cut Handle, Cigar Box Limited to 1,000 Pieces
Schrade ACB25 Schrade Classic, Bone Rope Cut Handle, Cigar Box Limited to 1,000 Pieces
Schrade ACB72 Schrade Classic, Bone Rope Cut Handle, Cigar Box Limited to 1,000 Pieces
Schrade ACB80 Schrade Classic, Bone Rope Cut Handle, Cigar Box Limited to 1,000 Pieces

UNCLE HENRY

Uncle Henry 5UH 3 1/2 Lockback w/Sheath
Uncle Henry 12UH Roadie- 2 3/4 in. w/Shackle
Uncle Henry 77UH Muskrat 3 7/8 in.
Uncle Henry 153UH Golden Spike- 9 1/4 in.- w/Sheath- fix blade
Uncle Henry 167UH Steelhead- 12 in.- w/Sheath- fillet knife
Uncle Henry 285UH Pro Trapper- 3 7/8 in. (1999 catelog)
Uncle Henry 707UH w/ scissor & cleavis
Uncle Henry 804UH Journeyman 2 blade w/ clevas
Uncle Henry 807UH J.R.- 2 3/4 in.- stockman
Uncle Henry 833UH Prairie Jack3-1/4 in. 2 blade
Uncle Henry 834UH Rancher- 3 5/16 in.- stockman
Uncle Henry 885UH Senior Rancher- 4 in.- stockman (called King Ranch in 1999 catelog)
Uncle Henry 897UH Signature Prenium Stock- 3 9/16 in.
Uncle Henry LB1 Cub- 2 1/4 in.- lockback
Uncle Henry LB2 Smokey 2 1/2 in.- lockback w/staglon handle
Uncle Henry LB3 Brown Bear- 3 in.- lockback
Uncle Henry LB4 Lockback- Staglon Handle
Uncle Henry LB5 Smokey- 3 3/4 in. w/Sheath (1999 catelog)
Uncle Henry LB7 Bear Paw- 5 in. Lockback w/Sheath
Uncle Henry LB8 Papa Bear- 5 in. w/Sheath (1999 catelog) has Staglon handle


SCHRADE TOOLS

Brand Model # Details
Schrade SK3 Knife Care Kit
Schrade ST175 Navitool- 4 3/4 in.- Liquid Filled Compass, Luminous Dial, Stainless Implements, LED Light, Signal Whistle& Signal Mirror, More
Schrade IQ180 iQuip- 4 3/4 in.- w/Digital Compass, Altimeter, Barometer, Thermometer, Stopwatch, Clock, Stainless Implements, LED Light, Signal Mirror, More

Schrade SSK5 Superknife 3 1/2 in. Handle Size Liner Lock, Chrome - accepts standard utility knife blades
Schrade SSK5B Superknife 3 1/2 in. Handle Size Liner Lock, Black - accepts standard utility knife blades
Schrade ST1L Schrade Tough Tool 4 3/4 in. closed, 7 in. open, w/Leather Sheath
Schrade ST1N Schrade Tough Tool 4 3/4 in. closed, 7 in. open, w/Nylon Sheath
Schrade ST2 Schrade Tough Chip 2 1/2 in. closed, 4 1/4 in open
Schrade ST2N Schrade Tough Chip 2 1/2 in. closed, 4 1/4 in open w/Nylon Sheath
Schrade ST6QU Toughgrip Tool- 7 in.- Vise grip Quail Unltd.
Schrade ST6 Toughgrip Tool- 7 in.- Vise Grip multi-tool
Schrade ST6H Toughgrip Tool- 7 in.- Vise Grip multi-tool- small screwdriver replaces the can opener on the ST6
Schrade ST6P Toughgrip Tool- 7 in.- Vise Grip multi-tool- w/Pouch
Schrade ST6HP Toughgrip Tool- 7 in.- Vise Grip multi-tool- w/Pouch- small screwdriver replaces the can opener on the ST6

Imperial TM2 3 5/8 in. Screwdriver Knife (Electrician knife)
Imperial TM6 Bladesaw- 4 1/4 in. w/ clip blade & saw blade- Ireland
Imperial TM20 Pruning Shear
Imperial TM202 Tradesman single blade non-locking
Imperial TM30 Tradesman single blade folder
Imperial TM44 Scraper w/ knife blade in handle
Imperial TM45 Putty Knife w/ knife blade in handle
Imperial TM8 Utility Shears
Imperial TM71 Tradesman T-Bevel
Imperial TMT2 Snips Tool
Imperial TMT11 Tradesman Multi-tool
 
How about adding the LB 1,2,3, and 4?

Where did you find a reference to the XT4? Have you seen a picture of it?
 
the 707UH:

63_1_b.JPG
 
The XT4 was a cataloged item not produced. There are several more that never saw production. And protos have not been seen either that I know of.

Codger
 
Redshanks,
All I know about the XT4 and the SPF1LTD came from the 2004 price list. I will email you a picture of both and maybe you can post it.
I will add the 707UH to the list. That is a nice little knife. I like it! I just got a 106OT the other day. It is nice too, but the Uncle Henry is much nicer.
 
redshanks said:
How about adding the LB 1,2,3, and 4?
Click to expand...

I have no reference to them in my limited library. If you can get me some info on them I will add them to my post.

Thanks,
Dale
 
You must log in or register to reply here.
Back
Top