- Joined
- Dec 6, 2004
- Messages
- 6,212
got an ironwood necker in Carpenter (car-tec) CTS BD30P its kind of like cpms30v but slight micro alloy changes
the blade is 1/8 thick and has an edge about 2.75 long and is flat ground. the pins are SS
OAL 6 inch
knife only
4 and 3/8 oz or 123g
knife and kydex rig
5 and 5/8 oz or 160g
asking 150$
the blade is 1/8 thick and has an edge about 2.75 long and is flat ground. the pins are SS
OAL 6 inch
knife only
4 and 3/8 oz or 123g
knife and kydex rig
5 and 5/8 oz or 160g
asking 150$