Alan Davis Knives
Knife Maker
- Joined
- Jun 28, 2010
- Messages
- 2,249
overall length - 7 1/16"
blade - 3 1/4" tip to scales x 15/16" high x about 3/32" thick
steel - 52100 carbon heat treated to Rc 59 - 60
blade finish - 400 grit satin on grind and mill finish on flats
grind - hollow 10" wheel
scales - desert ironwood
mosaic pin and lanyard hole - 3/16" copper
lanyard - leather with a matching hand turned bead in ironwood
sheath -I will make a left or right hand vertical leather as specified by the buyer. Horizontal $10 extra
This one is ground very thin, about .015" behind edge
$130.00 + $10 shipping in the US. International extra.
Thanks for looking,
Alan
blade - 3 1/4" tip to scales x 15/16" high x about 3/32" thick
steel - 52100 carbon heat treated to Rc 59 - 60
blade finish - 400 grit satin on grind and mill finish on flats
grind - hollow 10" wheel
scales - desert ironwood
mosaic pin and lanyard hole - 3/16" copper
lanyard - leather with a matching hand turned bead in ironwood
sheath -I will make a left or right hand vertical leather as specified by the buyer. Horizontal $10 extra
This one is ground very thin, about .015" behind edge
$130.00 + $10 shipping in the US. International extra.
Thanks for looking,
Alan
Last edited:
