Ironwood Scandi's

klammer

klammer

Feedback: +13 / =0 / -0
Joined
Jan 30, 2009
Messages
580
Hello Folks - here is my second round of knives. #1's blade is by maker Ivan Campos, #2 is by maker Bernie Garland. No sheaths - one can be made for an additional $25 - please excuse the crap pics of #1 - trying to figure out this new camera! Please let me know of any questions or if you want more photos!

Ironwood Scandi #1

Blade length: 3.5" - 1/8" 1070 HC steel - Scandi grind
Handle: 4.25" - Desert Ironwood w/black liner - brass fittings
SPF



Ironwood Scandi #2

Blade: 4.25" - 5/32" thick 01 tool steel - Scandi grind
Handle: 4.4" - Desert Ironwood w/black liner - Stainless fittings
$130

BGcustom1.JPG


BGIW3.JPG


BGGroup3.JPG



-Prices include shipping to US / Canada
-First "I will take it" wins
-Please PM / e-mail me with any questions!

Cheers,
Kris
 
Last edited:
Gorgeous work, Kris... I'm delighted with my Campos/Klammer Scandi with the ivory/ebony handle that you put on. That Scandi grind on Ivan's 1070 steel is so hair-topping keen that I'm almost afraid of it. Even after the first cut has healed:o.
 
I have one of Ivans' Hot Blooded Scandis and can attest to his skill at blade making, simply awesome.

Nice work that you have done.
 
Thanks for the comments folks!

The wood is not stabalized - as far as I know ironwood is too dense to stabilize and hard / dense enough that it does not need it. Its some tough stuff.

The other blade in the pics is a Scandi B&T in 1/8" 01 with stabilized spalted maple burl. During final sanding I got some fine lines in the blade finish :mad: which I have not had time to try and correct. Its some of the craziest spalted maple I have ever seen.
 
klammer said:
Thanks for the comments folks!

The wood is not stabalized - as far as I know ironwood is too dense to stabilize and hard / dense enough that it does not need it. Its some tough stuff.

The other blade in the pics is a Scandi B&T in 1/8" 01 with stabilized spalted maple burl. During final sanding I got some fine lines in the blade finish :mad: which I have not had time to try and correct. Its some of the craziest spalted maple I have ever seen.
Click to expand...

Ok let me know when you fix it I am interested in it. Also what kinda sheath do you make for these knives?


Thanks
 
Last edited:
Sounds good Henry - sheaths are simple fitted / folder over hand stitched from 7-8oz veg tanned leather w/belt loop.
 
The other blade in the pics is a Scandi B&T in 1/8" 01 with stabilized spalted maple burl

could you post up an image of this fine knife?
thanks for your reply
buzz
 
Last edited:
You must log in or register to reply here.
Back
Top