KornalskiKnives
Knifemaker / Craftsman / Service Provider
- Joined
- Sep 12, 2014
- Messages
- 1,088
You can buy each knife without sheath:
Price of the knife:
minus 25$ (-25$) for ABS sheath
minus 35$ (-35$) for leather sheath
KNIVES are NOT sharpened yet - I made stonewash on M390.
All without marks will be laser marked with my logo on Monday.
All will have ABS 2 mm black sheath like this one on the last pictures below.
I. 2x K390 AgorEDC 3,15 mm in orange G10 with black 2 mm ABS sheath
HT by myself for maximum wear resistance 64 HRC measured on Rockwell unit
Handles: G10 orange CNC texture or G10 by myself
Stainless steel screws sandblasted
Blade finish: sandblast with fine sand
Overall 235 mm, width 30 mm, cutting edge 115 mm.
Weight 140 g.
Price: 165$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
1.
2.
1&2
III. VANADIS10 Agor in Black CNC texture G10 with red liners and black 2 mm ABS sheath
AGOR PM Udeholm Vanadis10 4,7 mm in Black CNC CUT G10 with RED Hipps 1 mm liners
HT by myself for maximum wear resistance 63 HRC - measured
Stainless steel screws sandblasted
Stonewash finish
Overall 265 mm,
Cutting edge 140 mm
Width 34 mm
Weight: 215 g.
!!Knife is the same but with red liners!!
Price: 200$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
IV. N690 Agor in Black CNC texture G10 with yellow liners and black 2 mm ABS sheath
AGOR Bohler N690 Stainless Steel 4,5 mm in Black CNC CUT G10 with Yellow Plexi 3 mm liners
HT by myself for maximum wear resistance 63 HRC - measured
Stainless steel screws sandblasted
Stonewash finish
Overall 265 mm,
Cutting edge 140 mm
Width 34 mm
Weight: 261 g.
Price: 150$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
VII. AgorEDC PM Udeholm ELmax 4,0 mm Stainless Steel in Black G10 red liners and leather Siper's sheath.
HT by myself for maximum wear resistance 59 HRC.
Handles black G10 with red liners 1 mm hipps, stainless steel screws.
Sandblast finish blade and handles.
Overall 247 mm, width 32 mm, cutting edge 120 mm.
Weight 193 g.
Price: 175$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
VIII. AgorMax A2 6 mm in Neon Green G10 with ABS black 2 mm sheath
AgorMax A2 6 mm (0.236 inch.) in Neon Green G10 with red liners with 2 mm black ABS sheath
HT by myself 59 HRC.
Agor with flat grind.
Handles neon green G10 with 1 mm red liners with M5 stainless steel screws
Sandblast finish.Overall 300 mm (11,81 inch), cutting edge 175 mm (6,9 inch), width 35 mm (1,377 inch).
Weight 330 g.
Price: 175$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
IX. Bushcraft 3,8 mm (0.150 inch) O1 Tool Steel in orange G10 with liners
Steel: O1 Tool Steel Sheffield 3,8 mm - hardness 59 HRC - measured
Handles:1. Orange G10 with 1 mm red liners, linehole 8 mm
Dimmensions: overall 220 mm, cutting edge 105 mm,
Scandi zero for 18 degrees, handles 110 mm.
Price: 120$ for knife + 10$ for PayPal + 25$ for shipping to USA[/B](from POLAND UE) priority(10 days) parcel with value - PayPal
X. Bushcraft 3,8 mm (0.150 inch) O1 Tool Steel in orange G10 with liners
Steel: O1 Tool Steel Sheffield 3,8 mm - hardness 59 HRC - measured
Handles:1. Orange G10 with 1 mm yellow liners, linehole 8 mm carbon fibre tube
Dimmensions: overall 220 mm, cutting edge 105 mm,
Scandi zero for 18 degrees, handles 110 mm.
Price: 120$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
XI & XII. 2x Bushcraft 3,8 mm (0.150 inch) O1 Tool Steel in yellow G10 with liners
Steel: O1 Tool Steel Sheffield 3,8 mm - hardness 59 HRC - measured
Handles:1. Orange G10 with 1 mm red liners, linehole 8 mm carbon fibre tube
Dimmensions: overall 220 mm, cutting edge 105 mm,
Scandi zero for 18 degrees, handles 110 mm.
Price: 120$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
XIII. Bushcraft 3,8 mm (0.150 inch) O1 Tool Steel in orange G10 with liners
Steel: O1 Tool Steel Sheffield 3,8 mm - hardness 59 HRC - measured
Handles:1. Orange G10 with 1 mm yellow liners, linehole 8 mm carbon fibre tube
Dimmensions: overall 220 mm, cutting edge 105 mm,
Scandi zero for 18 degrees, handles 110 mm.
Price: 120$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
XIV. OSTBush M390 4,3 mm in Carbon Fibre with red liners & custom leather sheath by Masta Hobbyt
XV. OSTBush M390 4,3 mm in Tiger G10 & leather custom sheath[/COLOR]
Heat treated for max. wear resistance measured hardness 60 HRC.
Blade finish: Stonewash
Handles: Carbon Fibre with red liners 1 mm
Stainless Steel screws M5 sandblasted
CE for 25 degrees.
Overall 220 mm, blade 105 mm, handles 115 mm.XIV. Price: 175$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPalXV. Price: 160$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
XIV.
XV.
Price of the knife:
minus 25$ (-25$) for ABS sheath
minus 35$ (-35$) for leather sheath
KNIVES are NOT sharpened yet - I made stonewash on M390.
All without marks will be laser marked with my logo on Monday.
All will have ABS 2 mm black sheath like this one on the last pictures below.
I. 2x K390 AgorEDC 3,15 mm in orange G10 with black 2 mm ABS sheath
HT by myself for maximum wear resistance 64 HRC measured on Rockwell unit
Handles: G10 orange CNC texture or G10 by myself
Stainless steel screws sandblasted
Blade finish: sandblast with fine sand
Overall 235 mm, width 30 mm, cutting edge 115 mm.
Weight 140 g.
Price: 165$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
1.
2.
1&2
III. VANADIS10 Agor in Black CNC texture G10 with red liners and black 2 mm ABS sheath
AGOR PM Udeholm Vanadis10 4,7 mm in Black CNC CUT G10 with RED Hipps 1 mm liners
HT by myself for maximum wear resistance 63 HRC - measured
Stainless steel screws sandblasted
Stonewash finish
Overall 265 mm,
Cutting edge 140 mm
Width 34 mm
Weight: 215 g.
!!Knife is the same but with red liners!!
Price: 200$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
IV. N690 Agor in Black CNC texture G10 with yellow liners and black 2 mm ABS sheath
AGOR Bohler N690 Stainless Steel 4,5 mm in Black CNC CUT G10 with Yellow Plexi 3 mm liners
HT by myself for maximum wear resistance 63 HRC - measured
Stainless steel screws sandblasted
Stonewash finish
Overall 265 mm,
Cutting edge 140 mm
Width 34 mm
Weight: 261 g.
Price: 150$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
VII. AgorEDC PM Udeholm ELmax 4,0 mm Stainless Steel in Black G10 red liners and leather Siper's sheath.
HT by myself for maximum wear resistance 59 HRC.
Handles black G10 with red liners 1 mm hipps, stainless steel screws.
Sandblast finish blade and handles.
Overall 247 mm, width 32 mm, cutting edge 120 mm.
Weight 193 g.
Price: 175$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
VIII. AgorMax A2 6 mm in Neon Green G10 with ABS black 2 mm sheath
AgorMax A2 6 mm (0.236 inch.) in Neon Green G10 with red liners with 2 mm black ABS sheath
HT by myself 59 HRC.
Agor with flat grind.
Handles neon green G10 with 1 mm red liners with M5 stainless steel screws
Sandblast finish.Overall 300 mm (11,81 inch), cutting edge 175 mm (6,9 inch), width 35 mm (1,377 inch).
Weight 330 g.
Price: 175$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
IX. Bushcraft 3,8 mm (0.150 inch) O1 Tool Steel in orange G10 with liners
Steel: O1 Tool Steel Sheffield 3,8 mm - hardness 59 HRC - measured
Handles:1. Orange G10 with 1 mm red liners, linehole 8 mm
Dimmensions: overall 220 mm, cutting edge 105 mm,
Scandi zero for 18 degrees, handles 110 mm.
Price: 120$ for knife + 10$ for PayPal + 25$ for shipping to USA[/B](from POLAND UE) priority(10 days) parcel with value - PayPal
X. Bushcraft 3,8 mm (0.150 inch) O1 Tool Steel in orange G10 with liners
Steel: O1 Tool Steel Sheffield 3,8 mm - hardness 59 HRC - measured
Handles:1. Orange G10 with 1 mm yellow liners, linehole 8 mm carbon fibre tube
Dimmensions: overall 220 mm, cutting edge 105 mm,
Scandi zero for 18 degrees, handles 110 mm.
Price: 120$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
XI & XII. 2x Bushcraft 3,8 mm (0.150 inch) O1 Tool Steel in yellow G10 with liners
Steel: O1 Tool Steel Sheffield 3,8 mm - hardness 59 HRC - measured
Handles:1. Orange G10 with 1 mm red liners, linehole 8 mm carbon fibre tube
Dimmensions: overall 220 mm, cutting edge 105 mm,
Scandi zero for 18 degrees, handles 110 mm.
Price: 120$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
XIII. Bushcraft 3,8 mm (0.150 inch) O1 Tool Steel in orange G10 with liners
Steel: O1 Tool Steel Sheffield 3,8 mm - hardness 59 HRC - measured
Handles:1. Orange G10 with 1 mm yellow liners, linehole 8 mm carbon fibre tube
Dimmensions: overall 220 mm, cutting edge 105 mm,
Scandi zero for 18 degrees, handles 110 mm.
Price: 120$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
XIV. OSTBush M390 4,3 mm in Carbon Fibre with red liners & custom leather sheath by Masta Hobbyt
XV. OSTBush M390 4,3 mm in Tiger G10 & leather custom sheath[/COLOR]
Heat treated for max. wear resistance measured hardness 60 HRC.
Blade finish: Stonewash
Handles: Carbon Fibre with red liners 1 mm
Stainless Steel screws M5 sandblasted
CE for 25 degrees.
Overall 220 mm, blade 105 mm, handles 115 mm.XIV. Price: 175$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPalXV. Price: 160$ for knife + 10$ for PayPal + 25$ for shipping to USA(from POLAND UE) priority(10 days) parcel with value - PayPal
XIV.
XV.
Last edited:
