paulhilborn
Gold Member
- Joined
- Mar 22, 2006
- Messages
- 14,508
Selling some of my fixed blade customs---ALL slightly if ever used, all in excellent shape:thumbup:
Jarrett Fleming Skinner, will list the specs and link to original sales page. Used this ONCE and whittled a walking stick at our campsite---GORGEOUS knife and great EDC:thumbup:
Link to sale page with better pictures
: http://www.bladeforums.com/forums/showthread.php/1184869-3-skinners-available-(sold)
CPM D2
1/8" thick
Hollow Ground
Satin grinds w/ mill scale flats
firehose bolsters from shadetree w/ dark brown canvas micarta handles and natural micarta liners w/ orange g10 pinstripe
brown micarta pins and tube
OAL: 7" Edge: 3"
$200.00 SOLD Shipped USPS Small Box Priority, I pay PP fees...
Next is a Fibbleback Bushboot, came to me new but I carried it for a three days total in sheath in back pocket while building my deck. Only used a few times to scribe cedar boards when I couldn't find my pencil---otherwise it's been in a drawer
Specs: Fiddleback Bushboot: Desert Ironwood over Black G-10 with orange 'racing stripes', Skeletonized Full Tang in 5/32" O1 Steel.
Blade length: 3-1/4", OAL: 7-1/4"
Very nice in the hand, well balanced, nice high convex grind … great little bushcraft / hiking knife. Comes with wet formed KSF sheath the former owner did an excellent job on:thumbup:
$220.00 SOLD Shipped USPS Small Box Priority, I pay PP fees...
Next is a Chavez556 (Nick Nivette) Mini-Backpacker, this is a great little knife:thumbup: Comes with Kydex Sheath, 550 Paracord lanyard and fob on knife and Mini S-Biner I added. The handle on this nife is AWESOME!!! blade shows MINIMAL use from Kydex. Just a great little work knife.
Specs: A2 tool steel
Bos heat treat and cryo to 61rc
3" blade, 6.25" total length, 3/32' thick
High flat grind, etched and tumbled finish
Orange g10 liners, under circuit board micarta and blue g10 slice
Held together with micarta pins and ss lanyard tube
Comes with kydex sheath set up for teklock
$145.00 Shipped USPS Small Box Priority, I pay PP fees...
Next is a great little DCL aka, Drew pocket slicer with Leather Pocket Sheath and Fenix LD01 Flashlight. This is a great carry combo:thumbup:
Specs: DCL Pocket Carry: OAL-6"
Blade Length- just under 2.5"
Steel- .13 Aeb-l With heat treatment and cyro done by peters heat treating
Right hand chisel grind with acid washed finish
Green canvas handles secured with a stainless pin and titanium tube along with loctite hysol e 120hp epoxy
Drew made mine as I didn't buy off a Sales Thread of his. I did however post in a Sales thread of the identical knife he made for me. Used slightly on a rogue pile of cardboard and a few daily carries but that's it. This is sharp and fitted to cut if your right handed
Heres the link to the thread I posted in: http://www.bladeforums.com/forums/showthread.php/1092693-2-more-Pocket-EDCs Sheath measure 4'" wide and 4 7/8" tall.
$100.00 SOLD Shipped USPS Small Box Priority, I pay PP fees...
Thanks for looking, any questions please email or PM, I'll be in and out throughout the day and have to go to work @ 5pm Central Time. I reserve to right to sell or not sell to whoever I choose
Jarrett Fleming Skinner, will list the specs and link to original sales page. Used this ONCE and whittled a walking stick at our campsite---GORGEOUS knife and great EDC:thumbup:
Link to sale page with better pictures
: http://www.bladeforums.com/forums/showthread.php/1184869-3-skinners-available-(sold)CPM D2
1/8" thick
Hollow Ground
Satin grinds w/ mill scale flats
firehose bolsters from shadetree w/ dark brown canvas micarta handles and natural micarta liners w/ orange g10 pinstripe
brown micarta pins and tube
OAL: 7" Edge: 3"
$200.00 SOLD Shipped USPS Small Box Priority, I pay PP fees...
Next is a Fibbleback Bushboot, came to me new but I carried it for a three days total in sheath in back pocket while building my deck. Only used a few times to scribe cedar boards when I couldn't find my pencil---otherwise it's been in a drawer
Specs: Fiddleback Bushboot: Desert Ironwood over Black G-10 with orange 'racing stripes', Skeletonized Full Tang in 5/32" O1 Steel.
Blade length: 3-1/4", OAL: 7-1/4"
Very nice in the hand, well balanced, nice high convex grind … great little bushcraft / hiking knife. Comes with wet formed KSF sheath the former owner did an excellent job on:thumbup:
$220.00 SOLD Shipped USPS Small Box Priority, I pay PP fees...
Next is a Chavez556 (Nick Nivette) Mini-Backpacker, this is a great little knife:thumbup: Comes with Kydex Sheath, 550 Paracord lanyard and fob on knife and Mini S-Biner I added. The handle on this nife is AWESOME!!! blade shows MINIMAL use from Kydex. Just a great little work knife.
Specs: A2 tool steel
Bos heat treat and cryo to 61rc
3" blade, 6.25" total length, 3/32' thick
High flat grind, etched and tumbled finish
Orange g10 liners, under circuit board micarta and blue g10 slice
Held together with micarta pins and ss lanyard tube
Comes with kydex sheath set up for teklock
$145.00 Shipped USPS Small Box Priority, I pay PP fees...
Next is a great little DCL aka, Drew pocket slicer with Leather Pocket Sheath and Fenix LD01 Flashlight. This is a great carry combo:thumbup:
Specs: DCL Pocket Carry: OAL-6"
Blade Length- just under 2.5"
Steel- .13 Aeb-l With heat treatment and cyro done by peters heat treating
Right hand chisel grind with acid washed finish
Green canvas handles secured with a stainless pin and titanium tube along with loctite hysol e 120hp epoxy
Drew made mine as I didn't buy off a Sales Thread of his. I did however post in a Sales thread of the identical knife he made for me. Used slightly on a rogue pile of cardboard and a few daily carries but that's it. This is sharp and fitted to cut if your right handed
Heres the link to the thread I posted in: http://www.bladeforums.com/forums/showthread.php/1092693-2-more-Pocket-EDCs Sheath measure 4'" wide and 4 7/8" tall.
$100.00 SOLD Shipped USPS Small Box Priority, I pay PP fees...
Thanks for looking, any questions please email or PM, I'll be in and out throughout the day and have to go to work @ 5pm Central Time. I reserve to right to sell or not sell to whoever I choose
Last edited:
