Hi BF. Ive gota truck repair to take care of so need to move these along. First up is a really nice rig from Jason lyons up for sale today. It's new and unused but there are some dust nibs in the ceracote when it was coated. Nothing that affect its performance what so ever. The handle is very nicely contoured and comfortable in the hand. Specs are:
3/16" 80crv2 steel
5 " blade tip to handle
4-1/2" cutting edge
9-7/8" oal
graphite black ceracote
bocote wood handle carbon tubes
right or left hand cross draw 9 oz leather sheath
Asking $190 SOLD via PayPal F&F shipped in the CONUS . If you have any other questions fill free to PM me. If you leave me a message on my home board then please leave me a message in this thread so I know because I dont check my home board often. Thanks
Next up is a Hall Handmade Kwaiken by Ian Hall. Specs are:
AEB-L steel
2x2 carbon fiber scales.
3.75" blade, 8"OAL, .156 thick
It has a nice subtle SORI to it. Minor scratches in the satin finish from the kydex sheath. Ive carried this one for a month now so it's used but nothing heavy duty. Ulti clip included. Pretty sure this was about $250 new from Ian. Asking $110 OBO via PayPal F&F shipped in the CONUS.
Last up is a small EDC knife, I forget the model name, from hard edge knives (Kelley Ward) in 1095 that's 3/16 thick with a hollow ground and the edge has differential heat treatment on it and the temper line is visible and kinda looks like a hamon. File work on the spine. The handle is Tan paracord wrapped and soaked in epoxy with blue ray skin under it. Its 6.5 in OVAL and 2 7/8 blade. Lightly used on a couple camping trips. Asking $70 SOLD via PayPal F&F shipped in the CONUS.
Thanks for looking
-Tony
3/16" 80crv2 steel
5 " blade tip to handle
4-1/2" cutting edge
9-7/8" oal
graphite black ceracote
bocote wood handle carbon tubes
right or left hand cross draw 9 oz leather sheath
Asking $190 SOLD via PayPal F&F shipped in the CONUS . If you have any other questions fill free to PM me. If you leave me a message on my home board then please leave me a message in this thread so I know because I dont check my home board often. Thanks
Next up is a Hall Handmade Kwaiken by Ian Hall. Specs are:
AEB-L steel
2x2 carbon fiber scales.
3.75" blade, 8"OAL, .156 thick
It has a nice subtle SORI to it. Minor scratches in the satin finish from the kydex sheath. Ive carried this one for a month now so it's used but nothing heavy duty. Ulti clip included. Pretty sure this was about $250 new from Ian. Asking $110 OBO via PayPal F&F shipped in the CONUS.
Last up is a small EDC knife, I forget the model name, from hard edge knives (Kelley Ward) in 1095 that's 3/16 thick with a hollow ground and the edge has differential heat treatment on it and the temper line is visible and kinda looks like a hamon. File work on the spine. The handle is Tan paracord wrapped and soaked in epoxy with blue ray skin under it. Its 6.5 in OVAL and 2 7/8 blade. Lightly used on a couple camping trips. Asking $70 SOLD via PayPal F&F shipped in the CONUS.
Thanks for looking
-Tony
Last edited:
