JK, Tops, Kizer, Custom, and more

bikerector

Knifemaker / Craftsman / Service Provider
Feedback: +163 / =0 / -0
Joined
Nov 16, 2016
Messages
6,786
Prices include shipping and paypal fees. $5 off for multiple purchases, either this thread or combined with other knives I have listed. All prices are OBO. I'm open to trades but I'm pretty picky. I'm only actively looking into dagger or bayonet style fixed blades or OTF auto or a protech strider PT. Maybe some camp/hiking gear or clothing (large or XL).

All have been used to varying degrees.
lq9KWZ3l.jpg


Tops lite trekker that has seen some use but not much. Firesteel has been used a couple times but the mag rods look unused. It's a pretty lightweight setup for the size and I thought I would use it for camping but never used it myself, but I bought it used. Good used condition.

$80 spf

ZxYIGlYl.jpg

pGtycHrl.jpg


Kizer Sealion with orange G10 handles. This has VG10 steel and a petite handle. This would make a really good EDC for people that like about a 4" blade. The clip on the sheath is made of kydex so it's a bit wimpy, FYI. I used this around the house and backyard a bit for a season or two but not a full year. It has been sharpened. Slightly less than good condition because the coating it marked up decently and the handles have turned a bit faded for some reason. The sheath also rubs the front guard and leaves a black mark. Sheath retention is very nice on this one.

$50 SOLD

ha3KNArl.jpg

Mi5tNjJl.jpg

4knSbqUl.jpg

hvMM429l.jpg

yO5zz83l.jpg


Gerber Bear Grylls ultimate pro knife.
This has the upgraded 9cr19mov steel which is supposed to be similar to 440C in performance, it's pretty decent stuff for what it is. It has the full tang and gadget heavy sheath with fire steel, sharpener, and survival guide paperwork (wouldn't trust my life on it but it has some okay info there). The sheath retention is decent and it accepts the knife in both directions. The belt loop is removable. Gary put the fob and bead on it before selling it, whom I bought it from a year or more ago now. The overall knife is fairly similar in proportions to Gerber strongarm with a generous handle and thick stainless blade. It has some gimmiky labeling but functions pretty well.

$55

fub6MA7l.jpg

BZBOkC2l.jpg

Deo7DPTl.jpg
 
Last edited:
Stainless machete from David Mary Custom. This is AEB-L hardened in the high 50's, 58 or 59. The handle is black textured G10 with G10 pins. It has held up well to trail clearing work on the local mountain bike trails. It does suffer from skinny handle syndrome as it was during David's prototyping and learning days. One wrap of bicycle handlebar tape makes it pretty comfortable for long use but the without it isn't too bad for short bouts of chopping if you prefer the sleeker carry. It has seen moderately heavy use as a small machete, no batoning but plenty of chopping.

Not sure where to start with the price on this one so consider it more negotiable than the rest, especially towards trades.

$90 SOLD

fIJEEonl.jpg

QgHySLIl.jpg

fVmV9Kcl.jpg

Gasi7N3l.jpg


Good Knife Co/David Mary Custom Sitrep prototype. This one is made of roughly 1/8" sawmill steel and has seen heavy use from testing. The finish is rough since it was a test piece. We only had 2 of these made and I will keep the other as I've modified it further from the proto design. The steel isn't the hardest so it grinds pretty well but the edge will hold up to plenty of use. It's ground pretty thin so it's really slicey, thinner than our final design ended up, including the tip. The spine is heavily patined and there's a touch of rust and/or staining on it. As it's a heavily used piece that's just sitting, I don't want to spend time cleaning it up so I'm pricing it accordingly. Comes with a kydex sheath.

The pommel of the knife comes to a pretty brutal point if you need to smash glass or coconuts.

$70

kD0Ll1Gl.jpg

Mml4hW3l.jpg

LWoMaNSl.jpg
 
Last edited:
Hi. I would like to see the back of the sheath on the SeaLion. You can mail me a pic at faiello5 at aol dot com Thanks!
 
Back
Top