John Lloyd x3 CPM-154

VCM3

Dealer / Materials Provider
Platinum Member
Feedback: +447 / =0 / -0
Joined
Oct 26, 2005
Messages
16,801
I have three real nice pocket knives just in from John,a little pre blade sampler

If you are going to Atlanta ,stop by John's table 9E for knives,stag & more.



First up...

This trapper by John has a great blade profile. 3.5" closed,blade is 2-7/8" with 2.5" of edge. Opened up,it measures 6-3/8" OAL , very nice size. Blade & spring are CPM-154 ss. Mill relieved liners,pinned & inlaid shield are ss. The bolster is ss ,and has that rounded bevel John does. Other pins,ss. Hollow ground slicer thin. Drawn swedge,crescent nail pull. Pull is a glass smooth 5. Blade centers closed,spring is flush in all half stop positions. Very nice creamy mammoth ivory covers. Ships in a fleece lined,leather storage case.
Shipping in the States & Paypal fee's included
$365.

DSCN5982_zpsld4crinp.jpg



DSCN5983_zpszfmjvrhg.jpg



DSCN5984_zps0t3jsc9b.jpg



DSCN5985_zpsh7vxtleo.jpg



DSCN5987_zps7u3xxqpj.jpg


DSCN5988_zpsmw3rtzdk.jpg


DSCN5992_zpsq0so7xeo.jpg
 
Last edited:
This is a 3.25" stag swayback jack by John. Killer popcorn India Sambar stag. SS bolster,pins & mill relieved liner. Glass smooth 5 pull. Drawn swedge,crescent nail nick. Blade lays center closed,and the spring is flush with the liner in all half stop positions. Nice bevel on the bolster. CPM-154 ss blade & spring. Thin hollow grind,slicer sharp.The blade is 2.5" with 2.25" of edge,opened up it measures 5-7/8" OAL. Ships in a fleece padded leather storage case.
Shipping in the States & Paypal fee's included
$350.

DSCN5993_zpsyobuguzn.jpg


DSCN5994_zps3ot1bash.jpg


DSCN5995_zpso5ipt9xc.jpg


DSCN5996_zps9gnt4zee.jpg



DSCN5997_zpslq8ct2wc.jpg


DSCN5998_zpsnweiq6of.jpg


DSCN6000_zpsmz2bu0ki.jpg
 
Third & last,although there are a few more listed on my site too.

This knife by John has a curved jack,or trapper frame,and a very nice blade style,I'd say a modified warncliffe. Creamy mammoth ivory covers. Pinned & inlaid fancy ss shield , SS bolster,has a nice beveled front to it. 3-3/4" closed,blade is 2-7/8" tip to bolster with 2-5/8" of edge. Opened up it measures 6-5/8". CPM-154 ss blade & spring. Thin hollow grind. Nice smooth snappy 5,5+ pull,and this one can be "pinched" open. Crescent nail nick & drawn swedge. Blade lays center closed,spring is flush with liners in all half stop positions.SS mill relieved liners. Ships in a fleece padded leather storage case.
Shipping in the States & Paypal fee's included
$old

DSCN6004_zpscpyyxbgk.jpg


DSCN6006_zpsnt36qyso.jpg


DSCN6009_zps5fnnxrxe.jpg


DSCN6017_zps4ekwdm4c.jpg


DSCN6010_zpswis8ii9j.jpg


DSCN6014_zpskl6qw42o.jpg


DSCN6016_zps3qrxwrky.jpg
 
Last edited:
Back
Top