just purchased my first 2x72 belt grinder

I have had one for about 5-6 years and they are a very good grinder. No problems . You will enjoy it.
 
PT Doc said:
How do you change out the wheel, platen, etc?
Click to expand...

I think it might be another maker using aluminum like that, but I've seen accessory arms.

Isn't that close to a motorless KMG in price? I know next to nothing about grinders, but I know the KMG is really easy to accessorize. As far as I can tell, you're locked into buying everything from that particular maker. I sure would love to have one though! Congratulations :)

Edit- from the listing description-

2" X 72" Belt grinder Ideal belt length for economic knife making and general fabrication. Built by a toolmaker with 30+ years in precision machining. I built this to compete with the many machines on the market that cost from $1500-$3000. This machine will perform far beyond it's price range.Add motor of your choice, a couple of three step pulleys, and either bench or stand mount, and you can have a TOP QUALITY GINDER made in the USA from aircraft grade Aluminum that will last several lifetimes. No welds to fatigue and crack, nothing structural to rust. Includes tool rest that is adjustable for angles and a bolt on top plate that can be replaced for hollow grind attachment or larger work rest. Also a flat platten/slack belt attachment attachment, which can be replaced by any size contact wheel with 1/2" ID bearings from 2" to 14". It can also accept a small wheel attachment available from another manufacturer due to the fact that every face on the tool arm will accept 5/16" T nuts. Shipping is estimated at $50 in the lower 48 states. 15 day return policy if not satisfied for any reason, no questions asked. constructive criticism always welcome. Buyer responable for return postage and item must be returned in as new condition. refund is limited to sale price. Shipping non refundable. Check my other auctions which will include a stand with motor mounting plate. Thanks for reading this lengthy description.
 
I would not get that grinder. I would get a KMG without a motor for less money. The flat platen KMG is about $750. You can add, modify, or change KMG arms and accessories at will.
 
I agree with Stacy here. Although that grinder made with the extruded Aluminum will be light and work for a hobby, I would much prefer a heavier duty machine made from solid material. Solid material will be much more durable. Plus with a KMG you know the tooling will be interchangeable.
 
I also agree with Stacy. From looking at the pictures I think that the work rest would tend to want to move. I have had machinery before where a bolt is supposed to tighten down, but it just ends up becoming a pivot point. I also would be afraid to tighten bolts that are threaded into aluminum for fear of striping the threads out. I could be wrong and this grinder would probably work fine, but I think that the kmg is a simple, effective and robust design. That's just my 2 cent.
 
After reading the last few post by folks whom have not used the grinder, I bet Evan is extra glad John L posted of his good fortune with one for over 5 years. :thumbup:

I hope you have good luck with it Evan! That Tedg grinder looks similar to the AMK-77 in that they're both fabricated with channel aluminum.

[video=youtube;pK69rYcusGs]http://www.youtube.com/watch?v=pK69rYcusGs&feature=related[/video]
 
Last edited:
There are huge differenece between the ebay link and that video.


The tension spring is one



I agree at that price, I'd kmg and use a used motor.
 
zaph1 said:
GIB for $250 and pay a machine shop $200 to weld it together.
Click to expand...
Remember there's still the contact wheel(s), idler wheels, drive wheel, tool arm(s) and tool rest to round up too...usually amounting to hundreds more.
 
Thanks for the input on the grinder. As for tool arms you can purchase others from the same guy for around 50 and up grade it to what ever you want it to be. When I was shopping around I must have over looked the motor less kmg. As for the comment about the bolts threading into the aluminum I'll see how that goes worst case I'll have to drill them out and put threaded steel inserts. But thank you all for your thought and concerns when I get it set up all make sure to let every one know how it works and mods I plan to make.
 
If you buy a basic KMG for $750 you will have the start to a versatile machine. You can buy attachments as you go from paycheck to paycheck. In the long run you will be glad that you have first rate equipment in my opinion. I know that I was. I made all of toolbars from aluminum after buying the first one and I used 1/2 inch bolts and spacers to mount wheels and attachments. I learned to drill, and tap in a few minutes talking to someone who knows how. It is not that hard. I love the KMG but I have not used a no weld or grinder in a box...I'm sure they are fine because so many guys have built them and make nice knives. The only one better than a KMG to me is the TW 90 but I can find no excuse to buy one yet.
 
Larry,
There are several grinders out there that are better than a KMG, They have chinese bearings for starters.

Burr King comes to mind, Bader, Hardcore Products grinder which I own one is far smoother.
If was going to buy another grinder and on a budget I would get one of Chris's Look at his Little Buddy grinder.

http://www.wilmontgrinders.com/Pages/default.aspx Then on the top it would be Chris's Top of the line or the TW-90.
 
You must log in or register to reply here.
Back
Top