Never used, $210 (including shipping to 48 US lower states). The description below came from Justin original post.
===
My latest design, 9-1/4" overall with a 4.5 " blade. This is very similar to my Practical Field model, with a more traditional handle design. Made from .170" cpm3v tool steel with a flat grind and tapered tang, and features my new stonewashed finish, which is smoother and more rust resistant than the bead blasted finish I have been offering in the past. The blade is hand sanded to 400 grit, tumbled with creamic media, etched in ferric to darken, then neutralized and tumbled again for a random finish that is textureless, non-reflective and absorbs minor scuffs and scratches more gracefully than most other finishes.
Specs:
9-1/4" overall, 4-1/2" blade, .170" thick cpm3v tool steel by Crucible, heat treated by Peter's to 59-60 HRC
Tapered tang, flat grind, rounded back, thumb jimping
Black/forest green G10 scales with forest green spacers/liners
Assembled with West Systems G/Flex epoxy and flared stainless tubing
.080" black Kydex sheath with my QD carry clip which works for multiple carry options including belt, no belt, IWB and boot
Sheath will accept Tek Lok/Molle Loks
===
My latest design, 9-1/4" overall with a 4.5 " blade. This is very similar to my Practical Field model, with a more traditional handle design. Made from .170" cpm3v tool steel with a flat grind and tapered tang, and features my new stonewashed finish, which is smoother and more rust resistant than the bead blasted finish I have been offering in the past. The blade is hand sanded to 400 grit, tumbled with creamic media, etched in ferric to darken, then neutralized and tumbled again for a random finish that is textureless, non-reflective and absorbs minor scuffs and scratches more gracefully than most other finishes.
Specs:
9-1/4" overall, 4-1/2" blade, .170" thick cpm3v tool steel by Crucible, heat treated by Peter's to 59-60 HRC
Tapered tang, flat grind, rounded back, thumb jimping
Black/forest green G10 scales with forest green spacers/liners
Assembled with West Systems G/Flex epoxy and flared stainless tubing
.080" black Kydex sheath with my QD carry clip which works for multiple carry options including belt, no belt, IWB and boot
Sheath will accept Tek Lok/Molle Loks
Attachments
Last edited:
