KornalskiKnives
Knifemaker / Craftsman / Service Provider
- Joined
- Sep 12, 2014
- Messages
- 1,088
I. K390 EDC115 3,3 mm in orange G10 with red liners and black 2 mm ABS sheath
HT by myself for maximum wear resistance 63 HRC measured on Rockwell unit
Handles: G10 orange CNC texture with red liners 1 mm hipps
Stainless steel screws sandblasted
Blade finish: sandblast with fine sand
Overall 210 mm, width 24 mm, cutting edge 115 mm.
Weight 107 g., with sheath 146 g.
There is hole in the tang for paracord - just drill if you need line.
Asking price: - SOLD
II. K390 EDC90 3,3 mm in orange G10 with yellow liners and black 2 mm ABS sheath
HT by myself for maximum wear resistance 63 HRC measured on Rockwell unit
Handles: G10 orange CNC texture with yellow liners 1 mm hipps
Stainless steel screws sandblasted
Blade finish: sandblast with fine sand
Overall 190 mm, width 24 mm, cutting edge 90 mm.
Weight 97,3 g., with sheath 135 g.
There is hole in the tang for paracord - just drill if you need line.
Asking price: - 175$ with INTERNATIONAL(from POLAND UE) priority(10 days) parcel with value
III. VANADIS10 Agor in Black CNC texture G10 with yellow liners and black 2 mm ABS sheath
AGOR PM Udeholm Vanadis10 4,7 mm in Black CNC CUT G10 with Yellow Hipps 1 mm liners
HT by myself for maximum wear resistance 63 HRC - measured
Stainless steel screws sandblasted
Stonewash finish
Overall 265 mm,
Cutting edge 140 mm
Width 34 mm
Weight: 215 g.
Asking price: - 225$ with INTERNATIONAL(from POLAND UE) priority(10 days) parcel with value
IV. N690 Agor in Black CNC texture G10 with yellow liners and black 2 mm ABS sheath
AGOR Bohler N690 Stainless Steel 4,5 mm in Black CNC CUT G10 with Yellow Plexi 3 mm liners
HT by myself for maximum wear resistance 63 HRC - measured
Stainless steel screws sandblasted
Stonewash finish
Overall 265 mm,
Cutting edge 140 mm
Width 34 mm
Weight: 261 g.
Asking price: - 175$ with INTERNATIONAL(from POLAND UE) priority(10 days) parcel with value
HT by myself for maximum wear resistance 63 HRC measured on Rockwell unit
Handles: G10 orange CNC texture with red liners 1 mm hipps
Stainless steel screws sandblasted
Blade finish: sandblast with fine sand
Overall 210 mm, width 24 mm, cutting edge 115 mm.
Weight 107 g., with sheath 146 g.
There is hole in the tang for paracord - just drill if you need line.
Asking price: - SOLD
II. K390 EDC90 3,3 mm in orange G10 with yellow liners and black 2 mm ABS sheath
HT by myself for maximum wear resistance 63 HRC measured on Rockwell unit
Handles: G10 orange CNC texture with yellow liners 1 mm hipps
Stainless steel screws sandblasted
Blade finish: sandblast with fine sand
Overall 190 mm, width 24 mm, cutting edge 90 mm.
Weight 97,3 g., with sheath 135 g.
There is hole in the tang for paracord - just drill if you need line.
Asking price: - 175$ with INTERNATIONAL(from POLAND UE) priority(10 days) parcel with value
III. VANADIS10 Agor in Black CNC texture G10 with yellow liners and black 2 mm ABS sheath
AGOR PM Udeholm Vanadis10 4,7 mm in Black CNC CUT G10 with Yellow Hipps 1 mm liners
HT by myself for maximum wear resistance 63 HRC - measured
Stainless steel screws sandblasted
Stonewash finish
Overall 265 mm,
Cutting edge 140 mm
Width 34 mm
Weight: 215 g.
Asking price: - 225$ with INTERNATIONAL(from POLAND UE) priority(10 days) parcel with value
IV. N690 Agor in Black CNC texture G10 with yellow liners and black 2 mm ABS sheath
AGOR Bohler N690 Stainless Steel 4,5 mm in Black CNC CUT G10 with Yellow Plexi 3 mm liners
HT by myself for maximum wear resistance 63 HRC - measured
Stainless steel screws sandblasted
Stonewash finish
Overall 265 mm,
Cutting edge 140 mm
Width 34 mm
Weight: 261 g.
Asking price: - 175$ with INTERNATIONAL(from POLAND UE) priority(10 days) parcel with value
Last edited:
