PLackey
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 1, 2010
- Messages
- 469
$288 + 12 shipping
Click here to purchase
grind: flat and thin
blade length: 5″
overall length: 9 3/4″
steel: 3/32″ 8670 @ 60 Hc
handle: stabilized maple burl over black G10
handle thickness: 4/5
hardware: brass pins and tube. center brass/stainless mosaic pin
Sheath not included.
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 8670 blade is heated austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. 8670 Hardness is 60 hrc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
Click here to purchase
grind: flat and thin
blade length: 5″
overall length: 9 3/4″
steel: 3/32″ 8670 @ 60 Hc
handle: stabilized maple burl over black G10
handle thickness: 4/5
hardware: brass pins and tube. center brass/stainless mosaic pin
Sheath not included.
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 8670 blade is heated austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. 8670 Hardness is 60 hrc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
