- Joined
- Jul 23, 2008
- Messages
- 1,047
I have a Lambert Spearpoint for trade. I have carried the knife but not used it for anything more than mail duty....
There is a tiny scratch on the Damasteel bolster, but the pattern of the steel hides it unless you veiw it at a certain angle. The beadblasted clip has scratches, but can be cleaned up, or scotchbrite finished nicely.
The flat-weave CF scales are perfect, no scratches, and have a terrific grip to them.
The blade is perfect, the hand rubbed finish is still pristine. I have cut paper with the knife, as I intended on using it hard, and never had the heart. I did strop the edge with .5 micron diamond spray, but the polished edge is hair whittling sharp. I have a Sebenza I carry daily as well, and it sees all the actual knife use. This was more of a show-off knife to me, and I dont have any use for non users....
The lockup is super solid, no blade play in any direction, and the Ti liners are nice and strong. This knife proved to me that liner locks can be as sturdy as a framelock.
Blade Steel is CPM154, and has an Onyx thumbstud.
Trust me, the pictures I have currently were taken on a cloudy day, I will repost some better shots to properly showcase the beauty of this knife...
I am looking for folders, custom or semi-production.
I have been looking for a Begg for a while now, but I know thats a pipe dream.....
Anyways, I really am looking for a really nice CRK/Sebenza... I'd love to get an Annual Lg Seb, or ANYTHING with SS damascus blade. Wood and BG-42 are major pluses.
USERS OK/PREFERRED!!!!
I would prefer to do a straight trade, but if I see something I cant resist, I can add cash.
I was told by the original owner to get another in this configuration, it'd run upwards of $700. All the ones I have seen on dealers sites (ACK) are similar, but none have all the bells and whistles like this one. The closest had Damasteel bolsters, similar CF handles (tradional pattern, not flat-weave), but lacked an inlaid thumbstud. It sold for $625.....
Please contact me at rangerover_95@hotmail.com with any inquires.
This knife lights up in the sunlight. The coolest CF pattern I have seen.
This picture highlights the scratch on the bolster, its in the center of the triangle created by the bolster screw, pivot screw, and thumbstud.
Perfectly centered blade (dont mind the wood dust from my outside stairs, by the end of the knife they're not scratches/scuffs)
Lock up picture....
Blade Shots (looks like I left tape on the edge.... I really should have cleaned it up better for pictures....) Finish is beautiful and pristine!!
Cheers,
Berkely
There is a tiny scratch on the Damasteel bolster, but the pattern of the steel hides it unless you veiw it at a certain angle. The beadblasted clip has scratches, but can be cleaned up, or scotchbrite finished nicely.
The flat-weave CF scales are perfect, no scratches, and have a terrific grip to them.
The blade is perfect, the hand rubbed finish is still pristine. I have cut paper with the knife, as I intended on using it hard, and never had the heart. I did strop the edge with .5 micron diamond spray, but the polished edge is hair whittling sharp. I have a Sebenza I carry daily as well, and it sees all the actual knife use. This was more of a show-off knife to me, and I dont have any use for non users....
The lockup is super solid, no blade play in any direction, and the Ti liners are nice and strong. This knife proved to me that liner locks can be as sturdy as a framelock.
Blade Steel is CPM154, and has an Onyx thumbstud.
Trust me, the pictures I have currently were taken on a cloudy day, I will repost some better shots to properly showcase the beauty of this knife...
I am looking for folders, custom or semi-production.
I have been looking for a Begg for a while now, but I know thats a pipe dream.....
Anyways, I really am looking for a really nice CRK/Sebenza... I'd love to get an Annual Lg Seb, or ANYTHING with SS damascus blade. Wood and BG-42 are major pluses.
USERS OK/PREFERRED!!!!
I would prefer to do a straight trade, but if I see something I cant resist, I can add cash.
I was told by the original owner to get another in this configuration, it'd run upwards of $700. All the ones I have seen on dealers sites (ACK) are similar, but none have all the bells and whistles like this one. The closest had Damasteel bolsters, similar CF handles (tradional pattern, not flat-weave), but lacked an inlaid thumbstud. It sold for $625.....
Please contact me at rangerover_95@hotmail.com with any inquires.
This knife lights up in the sunlight. The coolest CF pattern I have seen.
This picture highlights the scratch on the bolster, its in the center of the triangle created by the bolster screw, pivot screw, and thumbstud.
Perfectly centered blade (dont mind the wood dust from my outside stairs, by the end of the knife they're not scratches/scuffs)
Lock up picture....
Blade Shots (looks like I left tape on the edge.... I really should have cleaned it up better for pictures....) Finish is beautiful and pristine!!
Cheers,
Berkely
Last edited: