Knife "Nordic Sunset"

K-E Lindblad

K-E Lindblad

Feedback: +9 / =0 / -0
Joined
Apr 17, 2009
Messages
637
***SOLD, pending funds. Many Thanks!***

[Blade] Nylund blade Carbon steel 3x80x27mm

[Handle] Flame birch and middle piece in crosscut masurbirch, barkcolored, oiled and sealed. Handle lenght Belly 90mm, spine 115mm, width 18,5mm thickest part.

[Sheath] Nordic style shaft leather dyed saddletan and light brown.

[Price] 260 US$, 245 US$ including shipping US, Europe and paypal fees.

Thanks for looking!

bb83new1.jpg


bb83new2.jpg


bb83new3.jpg


bb83new4.jpg


bb83new5.jpg


Cheers,
Karl-Erik
 
Last edited:
Thanks!

The blade is quite special, at least for me. It´s etched after vibration to start a nice patina effect, that according to the knifemaker, gets nicer during use.
This is what the maker Jacob Nylund describe the blades:

"
They are made in carbonsteel with a dash of vanadium to refine the grain and make the steel tougher.
The blades have been hollowground to zero and then I've removed the burr by creating a microbevel with my 3000grit stone and then they are honed. This makes for a very sharp edge that wont chip to easy. The finish on blades are a new, at least to me. The blades have been vibrated and then ethched to get a patina started. This makes for a beatiful and durable finish that only will get more beautiful the more it get used. The bevels have a polished 320 grit finish.
"

The wood is not stabilized, the masurpiece in the center of the handle comes from a masurbirch from Finland, the flamebirch piece is from Sweden. Finished of with 1200 grit sanding and some buffed wax, carnuba and finally renaissance wax.

Cheers,
Karl-Erik
 
Last edited:
You must log in or register to reply here.
Back
Top