- Joined
- Oct 26, 2005
- Messages
- 16,806
Good morning BF's members,
I'd like to point out some knives from various makers ,on my site. Also,I have 2 of my own knives ,"EDC" model.
The EDC's are 1/8" thick 440C ss ,deep hollow ground ,satin finish. These are real good little cutters. Two 3/32" nickel pins are peened before finishing. Slack belt satin finish all around the blade spine. 6-1/8" OAL with 2.5" of cutting edge. The blades are factory produced,have an excellent grind & finish,take & hold a good edge.
Sheaths are RH vertical belt loop. But you could drop one of these in your pocket ,they are compact. The knife design allows for a "four finger" grip.
Two of my favorite micarta's , green & natural canvas
>>>Both " EDC's " Sold Thanks
I'd like to point out some knives from various makers ,on my site. Also,I have 2 of my own knives ,"EDC" model.
The EDC's are 1/8" thick 440C ss ,deep hollow ground ,satin finish. These are real good little cutters. Two 3/32" nickel pins are peened before finishing. Slack belt satin finish all around the blade spine. 6-1/8" OAL with 2.5" of cutting edge. The blades are factory produced,have an excellent grind & finish,take & hold a good edge.
Sheaths are RH vertical belt loop. But you could drop one of these in your pocket ,they are compact. The knife design allows for a "four finger" grip.
Two of my favorite micarta's , green & natural canvas
>>>Both " EDC's " Sold Thanks
Last edited:
