Knives In Stock - KornalskiKnives "Jamall"

[KornalskiKnives]

Hi,

You can find me on my website --> www.kornalski.com.pl
Any questions; orders or want to talk mail me --> adam@kornalski.com

All costs posted in the thread are with PayPal fee ; shipping and changing currency fee.

Shipping by GLOBAL Express or Priority Post Letter with tracking. Usually 10 working days for delivery.
PayPal only.

Adam
---------------------------------------------------------------------------------------
Knife: Hunter
Steel: Vanadis 4 Extra Uddeholm PM Tool Steel
Thickness of 3,95; Hardness: ~63 HRC Secondary hardness
Handle: G10 black with 1mm red liners sandblasted
Blade 125 mm (~ 5"); OVERAL: 250 mm (~10"); width: 28 mm
Sheath: 2 mm black ABS with big teklok

Asking: SOLD

--------------------------------------------------------------------------------------------------
Knife: Chopper240
Steel: Bohler K720 Tool Steel
Thickness: 4.4 mm
Hardness: 59 HRC
Handle: G10 Black with red liners sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 395 mm ( ~15,5 inches)
The width of the blade: 38 mm (~1,5 inch)
Blade: 240 mm ( ~ 9,5 inches)
Sheath: 2 mm black ABS with Big TekLok - similar to the Fighter's one.

Asking: 180$ with all costs.

---------------------------------------------------------------------------------------------
Fighter 270 mm of blade with Ą8Mod 6.75 mm in G10 black with red liners.
ABS 2 mm sheath with Big TekLok.
Stonewash finish on the surface.

Asking: SOLD

--------------------------------------------------------------------------------------------------

Knife: Krypton
Steel: NZ4 (AISI A8Mod) Tool Steel
Thickness of 7.5 mm (~0,3 inch.)
Hardness: 58 HRC
Handle: G10 Black and red spacers sandblasted
Attachment: Turn stainless M4 screws
Finish blade: Stonewash after fine sandblasting
Size:
Total length: 300 mm (11,8 inch)
The width of the blade: 40 mm
Blade 170 mm ( 6,7 inch.)
Sheath: ABS 2 mm black sheath with big TekLok

Asking: 240 USD with ALL costs

-----------------------------------------------------------------------------------------
Knife: Fighter
Steel: M390 Stainless Tool Steel
Thickness of 4 mm
Hardness: 60 HRC
Handle: G10 Black and red spacers sandblasted
Attachment: Turn stainless M4 screws
Finish blade: Stonewash after fine sandblasting
Size:
Total length: 310 mm
The width of the blade: 32 mm
Blade 180 mm ( 7,1 inch.)
Sheath: ABS 2 mm black sheath with big TekLok

Asking: 230 USD with ALL costs

 

[KornalskiKnives]

adam@kornalski.com - PayPal only.

Knife: ODC130
Steel: M390 Bohler PM Stainless Tool Steel
Thickness of 3.6 mm
Hardness: 60 HRC Secondary hardness (Max. Wear Resistance)
Handle: G10 or Micarta Brown with red(black) 1 mm G10 liners
Attachment: Turn stainless steel M4 torx screws;Stonewashed
Size: OAL: 260 mm(10,24");width: 36 mm(1,42");Blade 130 mm(~5,2")
Sheath: ABS or Kydex with big teklok

Asking: 220 USD + 12 USD shipping

------------------------------------------------------------------------------------------------
Good price good knife
Shaving sharp.

Trizact A30 and 15 degrees per side made those extremely sharp tools.

Knife: Bushcraft
Steel: Bohler K720 Tool Steel
Thickness: 4.4 mm
Hardness: 59-60 HRC
Handle: G10 Black and Corian sandblasted
Attachment: Turn stainless steel M4 screws
Finish blade: Blackwash and satin
Size:
Total length: 210 mm ( ~8,25 inches)
The width of the blade: 31 mm (~1,22 inch)
Blade: 110 mm ( ~ 3,35 inches)
Weight: 224 g. (~ 7,9 ozs.)
Sheath: 2 mm black ABS with Big TekLok

Asking: 100 $ + shipping(12$)

Knife III

 

[WILLIAM.M]

Love your work!!!

 

[Sam Boswell]

I'll take knife II.

 

[KornalskiKnives]

I'll take knife II.

It is yours.
E-mail sent

 

[Djangology]

Beautiful knives! Can you tell us more about the nz4 Steel in the krypton? I've not heard of it and couldn't find much on google apart from it being an upgrade to s7 steel. So obviously super tough. What does it compare to in terms of wear resistance and sharpening?

 

[KornalskiKnives]

Beautiful knives! Can you tell us more about the nz4 Steel in the krypton? I've not heard of it and couldn't find much on google apart from it being an upgrade to s7 steel. So obviously super tough. What does it compare to in terms of wear resistance and sharpening?

NZ4 is polish name of AISI A8Mod steel.
http://www.zknives.com/knives/steels/steelgraph.php?nm=a8mod
It is NZ3(Giedymin's favourite) on steroids .
Tough with big amount of chromium(corrosion resist) and good edge retention. Quite easy to.sharpen. perfect for bigger knives.

ADAM

 

[shoegazer]

I'll take the big fighter, 270 mm blade, thanks. PM sent.