Knives with the wave feature

Yes, Dremel. The way I've done it is to put the knife blade in a vice and freehand the wave cutout. I tend to like the less conspicuous waves (just enough cut out to catch the pocket but not ruin the blade profile), but you can see on the ganzo blades I leveled off the top edge.

If you want it to work 100% of the time the material in front of the wave should be cut away; just like how Emerson and other production knives are done. Plus, I believe this gives the knife a cleaner, more finished look. :thumbup:


The mods posted are interesting to me... Dremel? Kinda wondering how hard it would be to do that to a couple knives that I have since I don't own any waved production knives.

I use a "rotary tool" ;) with the thinnest cut off wheels I can find. (sorry, not a real dremel but a craftsmen one with all the goodies)

Step one for me after taping the bare blade is to clamp it vertically in a heavy vice. I make the top cut to mark where the wave will actually go/end up then remove what is needed from the spine by making a cut parallel to the blade (sort of parallel I guess.) To do the longer cut I typically clamp the bare blade to a flat piece of wood in my vice so it's laying flat - I've found this helps to ensure the top cut is square to the blade's spine ( as close as possible to reduce the amount of grinding needed after)

Once the top cut and parallel cut meet you'll have a small triangle cut off of metal from the blades spine leaving the "wave" ready for testing and refinement. Finish grinding and shaping as required/preferred. In the case of this SNG, i used a 1/8" stone grinding bit to get the nice radius on this wave mod.

20899319786_ce3580f5fd_o.jpg
 
Last edited:
So far so good. The back of the blade needs some reshaping but the wave really works.

e0zrY7U_neJMfPwC3F44ozVfDw7Z4jSo1bdHBZyEPHk=w1353-h763-no
 
This is a suggestion. What do you people think about this mod to a Gayle Bradley?

22z7IbM6J8siODSnTD8gX7ZO25_8weOQ_hls7Uw5eO0=w1500-h720-no
 
Maybe it would be good to leave more hook to the wave. That would also give more support to the thumb if I wanted to use it as a thumb opening device.

That would be better... and be an effective beer opening device as well.
 
This is a suggestion. What do you people think about this mod to a Gayle Bradley?

22z7IbM6J8siODSnTD8gX7ZO25_8weOQ_hls7Uw5eO0=w1500-h720-no

I'd be worried about weakening the blade by cutting away so much material around the Spydie hole... Don't pry with it if you do the mod. ;):thumbup:

Ahead of the hole is safer IMHO.

Next wave mod???

20309268773_cedf24a233_h.jpg
 
I'm tempted to wave my Gayle Bradley but I'm also not sure if it would look okay as the first gen GB blade shape doesn't seem wave friendly...

19746799945_bb80e84ec2_h.jpg


Has anyone out there actually waved a GB?... :D
 
Last edited:
The results:

GT756AkBhDK-EiNfTy83OJPOu4o3qUnmKonzb3QWscU=w1353-h763-no


Functionally they work fine. With little practise the wave works 100%. The GB is the best wave knife I have used so far considering the opening. Both retain the thumb opening so I am not tied to wave.

The modifications were not perfect. I might have taken a bit too much of the GB. It works just fine, but looks a bit goofy. It changed the knife in to more of a weapon in my opinion.
 
On Monday I found another way to wave the CS TriAd folders, and I suppose it will work on others.
I EDCd the new waved knife during the day, and deployed it on different environments and circumstances (sitting in the bus when no one looked, standing in the street with a small bag on my back, going upstairs when entering home...) with an effectiveness of 100%.

To my surprise, this cheap little mod worked perfectly every time I drew the knife from my pocket. Will edit for pics in a couple hours.
 
Oh, and considering that in GB the scales hide the blade when closed, it is now easy to use as a impact device if needed. Thick steel liners give it strenght and heft for this application. The butt of the handle is perfectly shaped for this.
 
Here they are. Video too!

20150902_085541_zpsipq7mmzl.jpg


I just found a clothespin laying on the floor, and took the spring out. I was cleaning my Gunsite on the work bench, and when I came back I wondered: What if?

20150902_120257_zpsl8emfzro.jpg


20150902_120310_zpstjhxc9rg.jpg


Embedded the spring through the thumbstud hole, bent the steel with needlenose pliers and forced it so it won't move or wiggle. After about 50-60 attempts, I must say it works surprisingly good.

20150902_120026_zpsimerck8g.jpg


20150902_120016_zpsxwjnh4ht.jpg


Don't know how will it hold up or if the soft steel will bend soon, but deployment is excellent and doesn't rip or tear the pockets!

[video]http://vid1314.photobucket.com/albums/t562/ThePeacent/20150902_123702_zpsb6ftuwzu.mp4[/video]
 
When there is a will, there is a wave :D

I would have thought of a sepate hook like appendix that would be bolted to the hole, made of steel or aluminium.

The wave-fu is strong in this one.

[video=youtube;jf9SuyKRrNM]https://www.youtube.com/watch?v=jf9SuyKRrNM[/video]
 
When there is a will, there is a wave :D

I would have thought of a sepate hook like appendix that would be bolted to the hole, made of steel or aluminium.

The wave-fu is strong in this one.

[video=youtube;jf9SuyKRrNM]https://www.youtube.com/watch?v=jf9SuyKRrNM[/video]

Wow, yeah... I was drunk and high when I did this one.
 
Back
Top