Kornalski "Jamall" knives - Bohler PM M390 and Uddeholm PM Vanadis 4 Extra steels

[KornalskiKnives]

Hi,

You can find me on my website --> www.kornalski.com.pl
There are links to Instagram or Facebook if you use them.

Any questions; orders or want to talk mail me --> adam@kornalski.com

To all costs posted in the thread --> you need to add 5% for PayPal fee.
-------------------------------------------------------------------------------------------------
Knife: AgorEDC
Steel: M390 - wrongly markerd as Vanadis4e - engraver comp. error
Thickness of 3,62 mm
Hardness: 61 HRC Secondary hardness
Handle: G10 black sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 250 mm
The width of the blade: 31 mm
Blade 125 mm
Weight 201 g.
Sheath: 1,5 mm black Kydex with strap

Asking: 200 $ shipped

--------------------------------------------------------------------------------------------------
Knife: AgorEDC
Steel: Vanadis 4 Extra Tool Steel
Thickness of 3,62 mm
Hardness: 63 HRC Secondary hardness
Handle: G10 black + red liners 1 mm hips --> sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 250 mm
The width of the blade: 31 mm
Blade 125 mm
Weight 211 g.
Sheath: 1,5 mm black Kydex with Teklok

Asking: 200 $ shipped

---------------------------------------------------------------------------------------------------

Knife: Agor
Steel: Vanadis 10 Tool Steel
Thickness of 4,4 mm
Hardness: 62 HRC Secondary hardness
Handle: G10 black sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 255 mm
The width of the blade: 34 mm
Blade 130 mm
Weight 223 g.
Sheath: 2 mm black ABS

Asking: 200 $ shipped

---------------------------------------------------------------------------------------------------

Knife: Mikko
Steel: M390 Tool Steel
Thickness of 5 mm
Hardness: 61 HRC Secondary hardness
Handle: Browngreen micarta + red liners hips 1 mm -> sandblasted
Attachment: Turn stainless steel screws
Finish blade: Stonewash
Size:
Total length: 275 mm
The width of the blade: 42 mm
Blade 130 mm
Weight 347 g.
Sheath: 1.5 mm black Kydex

Asking: 225 $ shipped

--------------------------------------------------------------------------------------------------

Knife: Mikko Long 7"
Steel: Vanadis 4 Extra Tool Steel
Thickness of 4,7 mm
Hardness: 63 HRC Secondary hardness
Handle: G10 black sandblasted
Attachment: Turn stainless steel screws
Finish blade: Stonewash
Size:
Total length: 317 mm
The width of the blade: 35 mm
Blade 180 mm --> 7 inches
Weight 285 g.
Sheath: 1.5 mm black Kydex
It is knife for cutting - very thin and razor sharp edge.

Asking: 225 $ shipped

 

[Anaries]

Buy his knives! I own 2. Excellent craftsmanship, both came stupid sharp.

 

[hugofeynman]

I own six, love them all!

 

[baylea]

interest the mikkos

 

[BP_]

I own one and love it! Highly recommended. Excellent craftsmanship and F&F. I'm waiting on something like the Agor with something like a 105mm (4in) blade.

 

[Anaries]

interest the mikkos

I own one and love it! Highly recommended. Excellent craftsmanship and F&F. I'm waiting on something like the Agor with something like a 105mm (4in) blade.

I want the Mikko long, but I've blown my budget for a minute.

 

[madcap_magician]

Am I the only one who can't see the pictures?

 

[KornalskiKnives]

Am I the only one who can't see the pictures?

If have problems try to right click on picture and open in new window.
They works fine so you have problems with your browser

J.

 

[KornalskiKnives]

I own one and love it! Highly recommended. Excellent craftsmanship and F&F. I'm waiting on something like the Agor with something like a 105mm (4in) blade.

Will have 105 mm long blade with Vanadis4e - smaller version of AgorEDC with no jimping.
This will be made as a slicer/skinner knife.
Very thin edge before sharpening.
Need two days to finish it up.

J.

 

[BP_]

Will have 105 mm long blade with Vanadis4e - smaller version of AgorEDC with no jimping.
This will be made as a slicer/skinner knife.
Very thin edge before sharpening.
Need two days to finish it up.

J.

Can't wait to see it! Why no jimping?