Let's see what this will bring.
Up for trade a new unused Survivor. Here are the specifics
Blade
9 inches (sharpened), 10 inches to the front of the handle
A2 steel, hardened to 59 HRc
1/4" thick
2.25" tall at the belly
Flats will be "as-forged" finish
"K" logo will be etched
Handle
6 inches (from front of the handle to the pommel)
5.5 inches of actual handle material
1/4" thick material (0.75" total)
Options would be Natural, Green or Black canvas micarta
2 lanyards/tie downs (front safety lanyard = 1/4", rear handle lanyard = 3/8")
2 Corby pins (mechanical fasteners)
Handle is large enough to fit an extra large hand "just right". The rest of us "non-apes" will have some wiggle room - helpful in chopping.
POB (Point of Balance) is "in the ring"
Ring is 1 inch diameter and will be chamfered inside/out.
Really interested in things that go bang, handguns mostly, small caliber
22 LR to .45 ACP
I can +/- $ for the right deal
Up for trade a new unused Survivor. Here are the specifics
Blade
9 inches (sharpened), 10 inches to the front of the handle
A2 steel, hardened to 59 HRc
1/4" thick
2.25" tall at the belly
Flats will be "as-forged" finish
"K" logo will be etched
Handle
6 inches (from front of the handle to the pommel)
5.5 inches of actual handle material
1/4" thick material (0.75" total)
Options would be Natural, Green or Black canvas micarta
2 lanyards/tie downs (front safety lanyard = 1/4", rear handle lanyard = 3/8")
2 Corby pins (mechanical fasteners)
Handle is large enough to fit an extra large hand "just right". The rest of us "non-apes" will have some wiggle room - helpful in chopping.
POB (Point of Balance) is "in the ring"
Ring is 1 inch diameter and will be chamfered inside/out.
Really interested in things that go bang, handguns mostly, small caliber
22 LR to .45 ACP
I can +/- $ for the right deal