Krypton A8Mod 7.5(0,3") mm - 170 mm of blade in OliveWood with leather sheath - SOLD

[KornalskiKnives]

Hi,

You can find me on my website --> www.kornalski.com.pl

Any questions; orders or want to talk mail me --> adam@kornalski.com

To all costs posted in the thread --> you need to add 5% for PayPal fee.
-------------------------------------------------------------------------------------------------------

STEEL - AISI A8Mod (Bohler Chipper, Uddeholm Viking)

General Uddeholm Viking is a oil-air-vacuum-hardening steel which is characterized by: • good dimensional stability during heat treatment • good machinability and grindability • excellent combination of toughness and wear resistance • normal hardness in the range 52–58 HRC • ideal for surface coating (CVD, PVD) Exaggerated sketch of a typical punch and die in action. The chemical composition of Uddeholm Viking gives a hardness potential of 58 HRC with compressive strength and wear resistance accordingly. The small amount of primary carbides means a high chipping resistance and with 8 % chromium follows a very good hardenability and also a fairly good resistance to corrosion.

Typical
C Si Mn Cr Mo V analysis %
0.5 1.0 0.5 8.0 1.5 0.5

Applications Uddeholm Viking is a versatile, high alloyed tool steel characterized by the right combination of toughness and wear resistance required for heavy duty blanking and forming.

---------------------------------------------------------------------------------------------------
Movie was made in the evening by smartphone so colours lie )

Knife: Krypton
Steel: NZ4 (AISI A8Mod) Tool Steel
Thickness of 7.5 mm (~0,3 inch.)
Hardness: 58 HRC
Handle: OliveWood and G10 Black spacers sandblasted
Attachment: Turn stainless torx M4 screws
Finish blade: Stonewash after fine sandblasting
Size:
Total length: 300 mm (11,8 inch)
The width of the blade: 40 mm
Blade 170 mm ( 6,7 inch.)
Sheath: Leather handmade by SiperLetherWork

Asking: SOLD