Kydex questions

[Atlas Knife Company]

Where do people get eyelets for 3/32" kydex? I was able to heat and shape it rather nicely. However, I can't find any eyelets long enough to go through both layers of it.

 

[12345678910]

http://www.usaknifemaker.com/store/eyelets-premium-siska-14-black-100count-p-1431.html

http://www.usaknifemaker.com/store/eyelets-premium-siska-316-black-100count-p-1425.html

S-61 specs: Use to join 2 pieces of .09x" Concealex
* fit a 0.25" hole
* OD tube: 0.245"
* OD top rim: 0.385"
* length:.316"

There are both 1/4 and 3/16 but the descriptions are mixed up (reversed) material thickness vs actual length).
Email him for perfect info

Knifekits
3/16
Rivets - (Black) - #6-9 (3/16) - (For .08/.093 KYDEX™/Concealex)
Stock# KYSR69-100
http://www.knifekits.com/vcom/product_info.php?cPath=41_56&products_id=657

1/4
Rivets - (Black) - #8-9 (1/4) - (For .093 KYDEX™/Concealex)
Stock# KYSR9-100
http://www.knifekits.com/vcom/product_info.php?cPath=41_56&products_id=283

 

[Atlas Knife Company]

Thank you. That's why I can't find 3/16" eyelets long enough for it. Only the 1/4" will work. Are there rivets or anything else that will work?

 

[Atlas Knife Company]

Chicago screws! I just found them at the leather factory here in town. These are what I've been looking for. Not just for this project, but also for re-attaching the visor to my hockey helmet.

 

[12345678910]

What was wrong with these?

Knifekits
3/16
Rivets - (Black) - #6-9 (3/16) - (For .08/.093 KYDEX™/Concealex)
Stock# KYSR69-100
http://www.knifekits.com/vcom/product_info.php?cPath=41_56&products_id=657

 

[Atlas Knife Company]

I couldn't tell if those were for one piece of .093 or two. I haven't ruled them out, I just don't know what length they are. I wanted the smaller diameter, but judging by USAknifemakers site, the 3/16" are for joining two sheets of .063 kydex. I really didn't want the larger 1/4" on this small sheath.