First up is a Bill Akers(Backwoods) blade with my handle.
1095 steel,scandi grind,1/8" thick.7 5/8" OAL,3 5/8" blade,3 7/8 handle.
The scales are natural micarta over orange G10 with brass tubes filled with black G9 rod.
The mesh. rod handle & beads are the same nat. mic.
Orange G10 dot in the top of the mesh.rod handle.
Burnt orange kydex sheath by myself also.
The fire steel loop & belt loop are removable & it is teklok compatible.
There are some scratches on the blade & a ding in the kydex from my testing session.
It is super sharp & comfy in hand & needing a good home.
$100.00 shipped TYD.SOLD
Next is a John Landi PSK with my DIY handle of red/brown Curly Maple with mosaic pins.
John is discontinuing the PSKs & sold off his remaining stock of blades with scales for us DIYers
& I snagged this one & the next.
It comes with a black KSF pocket sheath.
1095 3/32" thick,FFG,6 1/2"OAL,2 5/8" blade,3 7/8" handle.
$75.00 TYD Withdrawn.
There is one ding on the blade up near the spine,from hitting the belt sander while shaping the scales.
Next is a Landi PSK with my handle of green micarta over orange G10.Brass tubes with black G9 rod in the front tube.
With a tan KSF pocket sheath.
1095,3/32" thick,FFG,6 5/8" OAL,the blade is 2 7/8" to the scales & the handle is 3 3/4".
$75.00 TYD.SOLD
I ship by USPS priority mail with tracking & ins.
International buyers will pay the cost of shipping.
Pay pal preferred or USPS Money order.
You must be 18 or older & legally able to own a knife.
The first I'll take it in this thread gets it.
My PP & email...mykel13atclearwiredotnet.
Thanks for looking.
I forgot to mention that I can't ship till friday because of my work schedule &
because these are DIY knives there are no makers marks.
1095 steel,scandi grind,1/8" thick.7 5/8" OAL,3 5/8" blade,3 7/8 handle.
The scales are natural micarta over orange G10 with brass tubes filled with black G9 rod.
The mesh. rod handle & beads are the same nat. mic.
Orange G10 dot in the top of the mesh.rod handle.
Burnt orange kydex sheath by myself also.
The fire steel loop & belt loop are removable & it is teklok compatible.
There are some scratches on the blade & a ding in the kydex from my testing session.
It is super sharp & comfy in hand & needing a good home.
$100.00 shipped TYD.SOLD
Next is a John Landi PSK with my DIY handle of red/brown Curly Maple with mosaic pins.
John is discontinuing the PSKs & sold off his remaining stock of blades with scales for us DIYers
& I snagged this one & the next.
It comes with a black KSF pocket sheath.
1095 3/32" thick,FFG,6 1/2"OAL,2 5/8" blade,3 7/8" handle.
$75.00 TYD Withdrawn.
There is one ding on the blade up near the spine,from hitting the belt sander while shaping the scales.
Next is a Landi PSK with my handle of green micarta over orange G10.Brass tubes with black G9 rod in the front tube.
With a tan KSF pocket sheath.
1095,3/32" thick,FFG,6 5/8" OAL,the blade is 2 7/8" to the scales & the handle is 3 3/4".
$75.00 TYD.SOLD
I ship by USPS priority mail with tracking & ins.
International buyers will pay the cost of shipping.
Pay pal preferred or USPS Money order.
You must be 18 or older & legally able to own a knife.
The first I'll take it in this thread gets it.
My PP & email...mykel13atclearwiredotnet.
Thanks for looking.
I forgot to mention that I can't ship till friday because of my work schedule &
because these are DIY knives there are no makers marks.
Last edited:
