- Joined
- Aug 9, 2013
- Messages
- 90
Need to fund a grail! Its a custom I've waited a year for and its ready so Im selling a large amount of my current collection. First I'll take it, followed by prompt paypal payment owns it, select the gift option or add 3.5% CONUS only please. Any questions give me a shout, and if you buy them both take $10 off. Here are the next two to go.
First! This iteration of the Large Buck Vantage is amazing. It is rocking a G10 high traction handle, S30v premium steel with the BOS heat treat, super smooth flipper action, and to date my favorite stonewash on any knife. I added a mirror polish dual beveled edge for maximum cutting performance while still maintaining a durable long lasting knife. Considering the professional sharpening and being as close to NIB as you can get I'll take a little less than what I payed for it $75 shipped.
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/20140916_130759_zpsphytrnay.jpg.html]
[/URL]
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/20140916_130918_zpsxia0kcgj.jpg.html]
[/URL]
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/20140916_130944_zpsiaq6jblu.jpg.html]
[/URL]
Check out this mirrored edge... cuts like a champ!
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/20140916_131154_zpswcr5zrda.jpg.html]
[/URL]
2.) Kershaw Rake (modified for use): Next on the block, I hated the bead blasted finish on the Rake, mainly because of poor resistance to corrosion and secondly any scratches or scuffs show up fairly substantially. So, I fixed it! Two tone acid etch, then stone washed, with the D2 cutting edge being noticeably darker. followed through on the rest of the knife with the steel liners, and pocket clip both acid etched and stone washed. removed the useless thumbstud and gave the existing hole a polished chamfered ring on each side. Lastly strapped it to the wicked edge to give a 36 degree inclusive mirror polished bevel and gave everything a proper lubing before reassembly. centered, smooth as butter and super fast deployment. selling it for the cost of the knife plus a little for my time $95 TYD!
I show the factory version to show the contrast:
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/IMAG0570_zps46d44aa9.jpg.html]
[/URL]
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/IMAG0573_zpseaa85703.jpg.html]
[/URL]
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/IMAG0575_zps00e9e7c4.jpg.html]
[/URL]
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/IMAG0581_zpsf95d25de.jpg.html]
[/URL]
First! This iteration of the Large Buck Vantage is amazing. It is rocking a G10 high traction handle, S30v premium steel with the BOS heat treat, super smooth flipper action, and to date my favorite stonewash on any knife. I added a mirror polish dual beveled edge for maximum cutting performance while still maintaining a durable long lasting knife. Considering the professional sharpening and being as close to NIB as you can get I'll take a little less than what I payed for it $75 shipped.
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/20140916_130759_zpsphytrnay.jpg.html]
[/URL][URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/20140916_130918_zpsxia0kcgj.jpg.html]
[/URL][URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/20140916_130944_zpsiaq6jblu.jpg.html]
[/URL]Check out this mirrored edge... cuts like a champ!
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/20140916_131154_zpswcr5zrda.jpg.html]
[/URL]2.) Kershaw Rake (modified for use): Next on the block, I hated the bead blasted finish on the Rake, mainly because of poor resistance to corrosion and secondly any scratches or scuffs show up fairly substantially. So, I fixed it! Two tone acid etch, then stone washed, with the D2 cutting edge being noticeably darker. followed through on the rest of the knife with the steel liners, and pocket clip both acid etched and stone washed. removed the useless thumbstud and gave the existing hole a polished chamfered ring on each side. Lastly strapped it to the wicked edge to give a 36 degree inclusive mirror polished bevel and gave everything a proper lubing before reassembly. centered, smooth as butter and super fast deployment. selling it for the cost of the knife plus a little for my time $95 TYD!
I show the factory version to show the contrast:
[URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/IMAG0570_zps46d44aa9.jpg.html]
[/URL][URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/IMAG0573_zpseaa85703.jpg.html]
[/URL][URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/IMAG0575_zps00e9e7c4.jpg.html]
[/URL][URL=http://s1372.photobucket.com/user/2thapoint/media/Mobile%20Uploads/IMAG0581_zpsf95d25de.jpg.html]
[/URL]