Latest knives from my workshop :)

Kosa_PL

Kosa_PL

Joined
Aug 25, 2013
Messages
1,220
Hello everyone,
I just wanted to show you all, a knives that I made in september :)

What Do you think about them ?
Hunter:
EDvexX.jpg

M5focf.jpg


Blade: 90mm
AOL: 205mm
Height: 20mm
Thickness: 2,5mm
Steel: N690 ~60HRC
Scales: G10 ~4,5mm, carbon fiber pins


Skylark:
WUKFQY.jpg

3UEHLY.jpg


Blade : T - 80mm, TW - 90mm
AOL: T- 185mm , TW - 195mm
Scales: ~ 4,5mm Black G10 , Carbon Fiber pins
Height: 20mm
Thickness: 2,5mm,
Steel: N690 ~60HRC


Gryphon:
AB0nFw.jpg

EgWsoV.jpg


Blade : 130mm
AOL: 265mm
Thickness: 4,3mm
Steel: Bohler M390 ~59HRC
Scales: G10 6mm, toxic, screwed M5 torx T25 Sec.
Height: 30mm

Grendel:
TEHujA.jpg

HTF8CL.jpg


Blade: ~125mm
AOL: 225mm
Height: 36mm
Thickness: 4,3mm
Steel: Bohler M390 ~59HRC
Scales: 6mm G10 toxic screwed M5 Torx T25 SEC


Bushcraft and Sheep (smaller)

AJyWb7.jpg

mZAqrz.jpg

hK3LG1.jpg


Bushcraft:

Blade: ~120mm
AOL: 240mm
Height: 30mm
Steel: 80CrV2 (NCV1) - 59HRC - ~3mm
Scales: Brown Mahogany - brass pins

Sheep:

Blade: ~100mm
AOL: ~200mm
Height: 35mm
Steel: 80CrV2 (NCV1) - 59HRC - ~3mm
Scales: Cordia glabrata - brass pins

Those knives are also avaible in Sales area ;)
​

Cheers,
Konrad Sadowski
POLAND
 
I think that they're all clean and well executed. You may want to consider expanding your designs to include a model with more of a curve in the spine/handle.....just my .02 worth.
 
Thanks for opinion :)

I was thinking all about this and probably for now I will end with 3 fixed Knives and 3 folder knives in offer.
 
Last edited:
Some new knives :)

Model Sphinx


Blade: 96mm / 3.77 inch
AOL: 232mm / 9.13 inch
Height: 30mm / 1.18 inch
Steel: Bohler M390 ~59HRC 4,3mm
Scales: ~5,5mm G10 textured, M5 Torx T25 SEC screws / 0.216 inch


028/2014








029/2014







 
New version of Gryphon ( Mk.IV) :D
Blade: 110mm

And will be made now from VANADIS 4 EXTRA.

MDMIHp.jpg

oPrQ2l.jpg
 
One of the best cutlery steel for small and medium knives (vanadis 4 extra) combined with DLC coating! What can we ask more?
 
Some later pic:

yDw5cB.png


Now time to wait for new Bora7 Belts and some Andre INOX disc for angle grinder :P
 
Finished today this guy :)

mi0Phk.jpg


Cutting Edge: 150mm
OAL: 270mm
Bevel Height: 22mm
Handle: 110mm
Knife height: 45mm
Steel: NCV1 ( ~80CrV2) 2,5mm ~62HRC marquenched
Scales: smooth, G10 black and carbon fiber pins
Finish: 500 grit hand rubbed satin
 
I quite like the Skylarks in a thin FFG they would be awesome slicers and Bird and trout knives.
 
You must log in or register to reply here.
Back
Top