- Joined
- Jul 8, 2008
- Messages
- 1,079
well out of the 8 of these that I finished up this last weekend, this is the last one left. I will be starting another batch this afternoon, but it will be a couple weeks before they will be ready.
The pack knife, this one is about the same size as the one on my hunting pack. not so heavy that you leave it at the truck, yet still a lot of cutting potential to get you out of a bind!
this one was forged out of a leaf spring from my friends ranch, have no idea what vehicle it came off of, but he said they quit adding to that pile a few decades ago. knives ive forged from these springs have cut very well.
OAL- 18"
blade- 12" long, .219" thick, 2 1/8" wide
steel- leaf spring, Forged, with in-house differential heat treatment which includes triple normalize, triple anneal, triple edge quench, and triple draw, for a great performing blade, that holds a great edge, and yet is easy to sharpen!
grind- a flat grind, with a convex edge, sharpened on a smiths diamond hone with micro bevels, to an agressive razor edge
finish- hammer finish, with a rough 220 grit machine finish on the bevels under a scotchbrite belt finish, for a rough and ready, easy to maintain working finish
handle- leather slabs, wrapped in jute cord, and soaked in epoxy
guard- no guard on this one, but the handle is contoured to steer your hand away from the cutting edge
sheath- 10oz leather, hand stitched, clean, dyed, hot-waxed, loop is sized for a 2" belt. personally I keep a blade like this one strapped to my pack instead of on my belt
before I put a handle on her, I cut a 2x4 in half twice, and the edge would still shave. it also passed an edge flex test, and put about half my wieght {210 lbs}to flex the blade sideways in a vise to check for toughness.
$185 plus $15 for shiping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order, or silver at spot price.
1st to post "I'll take it" gets it!!!
SOLD!!!
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
The pack knife, this one is about the same size as the one on my hunting pack. not so heavy that you leave it at the truck, yet still a lot of cutting potential to get you out of a bind!
this one was forged out of a leaf spring from my friends ranch, have no idea what vehicle it came off of, but he said they quit adding to that pile a few decades ago. knives ive forged from these springs have cut very well.
OAL- 18"
blade- 12" long, .219" thick, 2 1/8" wide
steel- leaf spring, Forged, with in-house differential heat treatment which includes triple normalize, triple anneal, triple edge quench, and triple draw, for a great performing blade, that holds a great edge, and yet is easy to sharpen!
grind- a flat grind, with a convex edge, sharpened on a smiths diamond hone with micro bevels, to an agressive razor edge
finish- hammer finish, with a rough 220 grit machine finish on the bevels under a scotchbrite belt finish, for a rough and ready, easy to maintain working finish
handle- leather slabs, wrapped in jute cord, and soaked in epoxy
guard- no guard on this one, but the handle is contoured to steer your hand away from the cutting edge
sheath- 10oz leather, hand stitched, clean, dyed, hot-waxed, loop is sized for a 2" belt. personally I keep a blade like this one strapped to my pack instead of on my belt
before I put a handle on her, I cut a 2x4 in half twice, and the edge would still shave. it also passed an edge flex test, and put about half my wieght {210 lbs}to flex the blade sideways in a vise to check for toughness.
$185 plus $15 for shiping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order, or silver at spot price.
1st to post "I'll take it" gets it!!!
SOLD!!!
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
Last edited:
