- Joined
- Oct 30, 2005
- Messages
- 3,947
-
The BladeForums.com 2024 Traditional Knife is ready to order! See this thread for details: https://www.bladeforums.com/threads/bladeforums-2024-traditional-knife.2003187/
Price is$300$250 ea (shipped within CONUS). If you live outside the US, I will contact you after your order for extra shipping charges.
Order here: https://www.bladeforums.com/help/2024-traditional/ - Order as many as you like, we have plenty.
Let's Try This Again, Trade Thread
- Thread starter JK Knives
- Start date
- Joined
- Oct 30, 2005
- Messages
- 3,947
Any takers???
- Joined
- Feb 14, 2012
- Messages
- 5,768
hey all. i have a few for sale and/or trade.
1. JK Vermont Hunter XL - $155
Blade length: 6"
Steel: 3/32" O1
Handle: 4 1/4" - i put the handle on. it is desert ironwood over coyote brown liners with nat canvas pins.
this is a kitchen and camp style knife. i have only used it in the kitchen. i had John make this for me as the "big brother" to the Vermont Hunter. you will see there is a generous amount of belly in the blade. i find it works pretty well for rocking on the cutting board. used sparingly. and, that's the problem. i would love someone else to check it out. no sheath.
spine is rounded, except for a squared off spot for "sparking"
2. HK Mini Pocket Muk (collab between John Kiedaisch and Peter Howard) - $65...SOLD
3/32" 01 carbon steel, Spattered Maple, brass front
pins and hollow lanyard pin, 5 1/2" OA, 2" blade
i am just not a small fixed-blade kinda guy. as received from peter. never used.
3. JK Sheepsfoot Utility - $65
Black canvas micarta handle. no sheath. this has scratches on blade from sharpening.
4. JK Panfish - $70
3/32 O1 tool steel
handmade brown paper micarta handle. the handle has issues...the epoxy did not set right. there are voids in it. fully functional though. worst case, this is a blade blank project.
5. AA Forge Belt Knife (no makers mark...guessing early work) - $55
Curly maple scales, forge finish. Handle is solid but has separated slightly from the steel. No sheath. 8" OA. 4 1/8" blade. steel is thicker...~3/16" at its thickest (distally tapered). no sheath.
1. JK Vermont Hunter XL - $155
Blade length: 6"
Steel: 3/32" O1
Handle: 4 1/4" - i put the handle on. it is desert ironwood over coyote brown liners with nat canvas pins.
this is a kitchen and camp style knife. i have only used it in the kitchen. i had John make this for me as the "big brother" to the Vermont Hunter. you will see there is a generous amount of belly in the blade. i find it works pretty well for rocking on the cutting board. used sparingly. and, that's the problem. i would love someone else to check it out. no sheath.
spine is rounded, except for a squared off spot for "sparking"
2. HK Mini Pocket Muk (collab between John Kiedaisch and Peter Howard) - $65...SOLD
3/32" 01 carbon steel, Spattered Maple, brass front
pins and hollow lanyard pin, 5 1/2" OA, 2" blade
i am just not a small fixed-blade kinda guy. as received from peter. never used.
3. JK Sheepsfoot Utility - $65
Black canvas micarta handle. no sheath. this has scratches on blade from sharpening.
4. JK Panfish - $70
3/32 O1 tool steel
handmade brown paper micarta handle. the handle has issues...the epoxy did not set right. there are voids in it. fully functional though. worst case, this is a blade blank project.
5. AA Forge Belt Knife (no makers mark...guessing early work) - $55
Curly maple scales, forge finish. Handle is solid but has separated slightly from the steel. No sheath. 8" OA. 4 1/8" blade. steel is thicker...~3/16" at its thickest (distally tapered). no sheath.
Last edited:
1066vik
Gold Member
- Joined
- Nov 28, 2009
- Messages
- 21,315
which models are they, what size, and do you want to give an idea of what you consider a reasonable offer -- or what you might be looking for in trade?
- Joined
- Oct 30, 2005
- Messages
- 3,947
Left to right: EDC Bowie $165
Jr Scout. $175
Crooked Creek $175
If you are really interested I can email u a pic with measurements.
Thanks
Danny
Jr Scout. $175
Crooked Creek $175
If you are really interested I can email u a pic with measurements.
Thanks
Danny
- Joined
- Feb 14, 2012
- Messages
- 5,768
It's yours, if you want it. just replied. thanks.
- Joined
- Oct 12, 2010
- Messages
- 8,189
Got a couple that I thought I would offer here before putting them up in the exchange.
Sheep Skinner in Ironwood with brass pins and liners. 1/8" O-1. One of only two made. Lightly used and stropped. Comes with pouch sheath by JK $180 shipped.
Canadian Belt knife in Black micarta with brass, rounded spine. 1/8" O-1. There is some discoloration on the handle from storing in the sheath, and a tiny spot of red rust on the opposite side, where the ricasso meets the handle. A light sanding would take care of both issues. Very lightly used and stropped. Comes with pouch sheath by JK. $160 Shipped
Survival/Tin knife with forge finish. Mirror polished edge, kydex sheath with paracord keychain and carabiner. $50 shipped.
Buy more than one knife and take 10 off the price. US only please. Can take additional pictures if requested.
Thanks
Sheep Skinner in Ironwood with brass pins and liners. 1/8" O-1. One of only two made. Lightly used and stropped. Comes with pouch sheath by JK $180 shipped.
Canadian Belt knife in Black micarta with brass, rounded spine. 1/8" O-1. There is some discoloration on the handle from storing in the sheath, and a tiny spot of red rust on the opposite side, where the ricasso meets the handle. A light sanding would take care of both issues. Very lightly used and stropped. Comes with pouch sheath by JK. $160 Shipped
Survival/Tin knife with forge finish. Mirror polished edge, kydex sheath with paracord keychain and carabiner. $50 shipped.
Buy more than one knife and take 10 off the price. US only please. Can take additional pictures if requested.
Thanks
NJBillK
Custom Leather and Fixed Blade modifications.
- Joined
- Mar 27, 2014
- Messages
- 9,594
Oh Man! That is a Great looking CBK, if not The best looking one I have seen to date.
The lines remind me of an old sports car, maybe the shoulders of a gto judge, an L72 Vette, or an old cobra. Just a fantastic piece of equipment that just performs, no matter what.
I wish I had the coin...
The lines remind me of an old sports car, maybe the shoulders of a gto judge, an L72 Vette, or an old cobra. Just a fantastic piece of equipment that just performs, no matter what.
I wish I had the coin...
- Joined
- Oct 12, 2010
- Messages
- 8,189
I'm pretty sure that John dropped these from his line, so now is the time to jump on it.
JK Knives
Moderator
- Joined
- Mar 6, 2001
- Messages
- 28,091
- Joined
- Jan 9, 2015
- Messages
- 305
Spyderco G10 Police Model. VG-10 steel, new in box, $100 shipped.
That is ne of my fav spyderco models... Great deal. If you put that in the exchange, someone will snag it
JK Knives
Moderator
- Joined
- Mar 6, 2001
- Messages
- 28,091
I put it in the exchange the same time as I put it here, no bites yet.