AKA the wilderness model 1. Two of them tonight.
First is the XL size, I wanted to do one with a larger blade and this is what I ended up making:
OAL 11 inches
Blade 6.25 inches .095 15N20 convex ground, differential temper. relatively good size drop to the edge.
Handle 4.5 or 4.75 (depending on how you count the drop) natural canvas micarta scales with stainless fittings. Nice and thick, too.
Sheath is a koyote girl made expedition sheath with adjustable carry.
general info on the model 1 knife and expeditions sheaths at
http://www.koyoteknives.com/wilderness1.html
http://www.koyoteknives.com/expedition.html
Sold!
Second is a standard one- dressed up in flame marked osage orange.
OAL 9.75 inches
Blade 5.25 inches .095 15N20, differentially tempered, convex grind. Nice simple filework pattern on rear of the spine
Handle - flame marked osage orange with brass fittings, lanyard holes front and rear. Tung oil finish, 3 coats. Easy to maintain, toss a coat on once a year or so and buff it out with a cloth.
Sheath- not made yet! Will be an expedition sheath, but you have a choice of colors or specific details (firesteel loop or whatever) since it's not made yet
SOLD
general info on the model 1 knife and expeditions sheaths at
http://www.koyoteknives.com/wilderness1.html
http://www.koyoteknives.com/expedition.html
First is the XL size, I wanted to do one with a larger blade and this is what I ended up making:
OAL 11 inches
Blade 6.25 inches .095 15N20 convex ground, differential temper. relatively good size drop to the edge.
Handle 4.5 or 4.75 (depending on how you count the drop) natural canvas micarta scales with stainless fittings. Nice and thick, too.
Sheath is a koyote girl made expedition sheath with adjustable carry.
general info on the model 1 knife and expeditions sheaths at
http://www.koyoteknives.com/wilderness1.html
http://www.koyoteknives.com/expedition.html
Sold!
Second is a standard one- dressed up in flame marked osage orange.
OAL 9.75 inches
Blade 5.25 inches .095 15N20, differentially tempered, convex grind. Nice simple filework pattern on rear of the spine
Handle - flame marked osage orange with brass fittings, lanyard holes front and rear. Tung oil finish, 3 coats. Easy to maintain, toss a coat on once a year or so and buff it out with a cloth.
Sheath- not made yet! Will be an expedition sheath, but you have a choice of colors or specific details (firesteel loop or whatever) since it's not made yet
SOLD
general info on the model 1 knife and expeditions sheaths at
http://www.koyoteknives.com/wilderness1.html
http://www.koyoteknives.com/expedition.html
Last edited:
