Light Sale: JetBeam / Klarus / Maglite *Updated 5/30*

[moshow9]

Sale Terms:

• US/US territory shipping only, unless we have previously dealt before
  
• First Class shipping unless otherwise indicated
• Paypal Purchase of Goods Option (no gift payments please)
• I reserve the right to refuse sale at my discretion
• Not looking for trades

3) JetBeam Jet-TH20 Cool White relisted
4) Maglite 2D (2x26650) XHP-70 M2 3500k relisted
9) Klarus XT2CR relisted

1) Armytek Partner C1 XP-L Warm White [Sold to Azula Gun Holsters] $35
2) Armytek Wizard Pro v3 XHP-50 Warm Headlamp [Sold on another forum] $70 $75 $80
5) Muyshondt Aeon MkIII Aluminum (Deep Indigo) modified** [Sold on another forum] $220 ships priority $235 $255
6) Olight H1 Nova Neutral White Headlamp [Sold on another forum] $42 $45 $50
7) Omicron 10180 custom flashlight ** [Sold on another forum] $250 ships priority
8) Fenix HM50R Headlamp [Sold on another forum] $45

**For lights with guppdydrv firmware see pic for UI breakdown.
​

guppydrv Rev1

guppydrv Rev2

 

[moshow9]

1) Armytek Partner C1 XP-L Warm White
Emitter: XP-L (neutral white leaning towards warm white). This is a forward clicky light that gives you the ability to use momentary on. Uses a TIR optic. Head tightened gives max output, while head loosened offers 4 modes from low to high. Has been carried and shows some signs of use with a couple of tiny dings and light coating wear. Uses either a CR123a, 16340, or 18350 battery. Includes box, instructions, original accessories, and an AW 18350.

2) Armytek Wizard Pro v3 XHP-50 Warm
Emitter: XHP-50 (neutral white leaning towards warm white). Very bright headlamp that has never worn on head but used a couple of times as a bedside light for it's low modes. Full Disclosure, the holder for the headlamp uses plastic that snaps in to place on the headlamp in set tracks. This allows for the headlamp to be held securely but freely rotate. There is very light wear marks on these tracks from natural rotation. See 2nd photo to see how light these marks appear. Uses either a 1x18650, 2xCR123a batteries, 2x18350 batteries, or 2x16340 batter's. Includes box, instructions, original accessories, both magnetic (but not magnetic charging capable, magnetic in that it sticks to magnetic surfaces) and flat non-magnetic tailcaps, and an 18650 battery (Sanyo NCR18650GA).

 

[moshow9]

3) JetBeam Jet-TH20 Cool White
Emitter: XHP70.2 (cool white). Super bright! Has a momentary/constant on switch, with paddle switches along side main tail switch. Paddle switches adjust modes from Turbo, High, Med, and Low. A press and hold from either on or off will activate strobe. Includes box and all original accessories, along with Jetbeam battery.

4) Maglite 2D (2x26650) XHP-70 M2 3500K
Emitter: XHP-70 (warm white). This is a forward clicky light that gives you the ability to use momentary on using the side switch. This light was modified by Matt of Adventure Sport Flashlights (vestureofblood on CandlePowerForums) - a great guy btw! This light puts out anywhere from an approximate lumen on low to about 4000 lumens on max. Being a maglite and having the ability to focus, keep in mind that against a white wall a donut can be observed in the hotspot. This is a result of the 4-die cross XHP-70 emitter. In actual use outdoors this is not noticeable. Uses and includes 2x26650 Efest batteries. Matt machined a spacer and affixed it permanently inside the tube to prevent rattle with the 26650 batteries. The spring was also shortened by Matt to more easily accommodate the batteries.Includes light and batteries. Can be programmed using guppydrv rev2 in OP.

 

[moshow9]

5) Muyshondt Aeon MkIII Aluminum (Deep Indigo) modified
Emitter: Nichia 219B (neutral white). This was modified by ShineOnYouCrazyDiamond with guppydrv Rev 1 firmware with a FET-15. Includes box and 4 x 15270 IMR batteries.

6) Olight H1 Nova Neutral White
Emitter: XM-L2 (neutral white). Tested but unused/uncarried. Uses CR123a battery or 16340 battery. Includes original packaging and original accessories minus the included CR123a battery. Swapped that out and am including a Keeppower protected 16340 battery.

 

[moshow9]

7) Omicron 10180 custom flashlight
Emitter: Nichia 219C 4000K (neutral white). Custom Ti light in a beadblasted finish. Firmware is guppydrv Rev 1. Runs off of a 10180 battery (1 included), along with box and split-ring. Tail end can take 6 1mm x 3mm tritium vials. Max output is around 200 lumens. Please excuse the blue velvet lint that stayed on the light when I removed it from it's pouch.

 

[Azula Gun Holsters]

Will take the Armytek Partner C1 XP-L Warm White

 

[moshow9]

Will take the Armytek Partner C1 XP-L Warm White

You got it, message incoming.

 

[moshow9]

Payment has been received, the Armytek Partner C1 is sold to Azula Gun Holsters.

 

[moshow9]

The Omicron has sold on another forum. Up for another look.

 

[moshow9]

Price drops on all lights!

 

[moshow9]

Up again with new prices.

 

[moshow9]

Added the following 2:

8) Fenix HM50R Headlamp
Emitter: XM-L2 U2 (cool white). Nice rechargeable headlamp from Fenix. Press and hold to turn on, repeat to turn off. While on, a single click cycles through the modes. While off, a single click activates the battery checker (green is charged, blue is low). Battery can be charged while in the headlamp using a micro usb charger (included). Light will run off of a 16340 or CR123a battery. Includes rechargeable battery and original accessories.

9) Klarus XT2CR
Emitter: XHP-35 HI (neutral white). This has been carried and used. It was modded from a stock cool white XPH-35 HD to a nice neutral white XHP-35 HI. The HI emitter has more throw over stock, but output is slightly lower than the stock 1,600 lumens. Includes original 18650 battery, box, belt case, and micro usb charging cable. An 18650 with protection capable of high discharge is required for full output on Turbo. This light will also run off of 2 CR123a batteries.

Full disclosure: Battery may need to replaced as output sometimes drops slightly on Turbo when fully charged. Also, there looks to be something that stayed inside the head when the emitter was swapped. It could possibly be taken out but I never attempted to as it never posed a problem with the beam. Light isn't in rough condition but it does show some light ano wear due to carry.

 

[moshow9]

Up again with new prices.