- Joined
- Feb 1, 2010
- Messages
- 1,312
Little Storm Swept Point Number 1
1/8 inch 1095 carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is coyote brown paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 4.8 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 8.9 inches
Hard Edge Knives makers mark on spine
Sheath coyote brown Kydex drilled for a small Tek Loc.
SOLD Price $40 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
Little Storm Swept Point Number 2
3/16" thick 8670M high carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is coyote brown paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 4.4 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 8.5 inches
Hard Edge Knives makers mark on spine
Sheath coyote brown Kydex drilled for a small Tek Loc.
SOLD Price $50 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
Slim:
Steel: 3/16" thick 1095 differentially heat treated with and edge hardness at about 60 Rc.
Blade Length: 4" long with hammer marks and forging scales on flats and steel hollow grind
Overall Length: 7.25 long with 1/4" diameter lanyard hole
Handle: Full tang with Jute wrap, epoxy soaked
Sheath: Kydex with top three holes spaced for small (mini) Tek-Loc.
Price: $40 delivered in U.S.
I prefer PayPal (my account is kelley_ward@keysight.com) but accept other forms of payments.
Little Storm Swept Point Number 3
3/16" Thick 8670M carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is coyote brown paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 4.2 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 8.5 inches
Hard Edge Knives makers mark on spine
Sheath coyote brown Kydex drilled for a small Tek Loc.
SOLD Price $50 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
http://imageshack.com/a/img538/2151/fx6WM6.jpg
DROP POINT
Steel: Nicholson 8" file (3/16" thick), forged with the edge hardened to approximately 60 Rc.
Blade Length: 4.6 inches long, flat ground with convex edge. File marks left in blade.
Overall Length: 8.8 inches long
Handle: Gutted black paracord wrapped over green sea snake skin on knifes full tang. Paracord is treated with penetrating epoxy.
Sorry no lanyard hole, the steel is to hard to drill with anything less than carbide.
Sheath: Black Kydex with three upper holes spaced for a small (mini) Tec-Loc.
Price: $55 shipped in US
I prefer PayPal (my account is kelley_ward@keysight.com) but will accept other forms of payment.
1/8 inch 1095 carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is coyote brown paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 4.8 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 8.9 inches
Hard Edge Knives makers mark on spine
Sheath coyote brown Kydex drilled for a small Tek Loc.
SOLD Price $40 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
Little Storm Swept Point Number 2
3/16" thick 8670M high carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is coyote brown paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 4.4 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 8.5 inches
Hard Edge Knives makers mark on spine
Sheath coyote brown Kydex drilled for a small Tek Loc.
SOLD Price $50 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
Slim:
Steel: 3/16" thick 1095 differentially heat treated with and edge hardness at about 60 Rc.
Blade Length: 4" long with hammer marks and forging scales on flats and steel hollow grind
Overall Length: 7.25 long with 1/4" diameter lanyard hole
Handle: Full tang with Jute wrap, epoxy soaked
Sheath: Kydex with top three holes spaced for small (mini) Tek-Loc.
Price: $40 delivered in U.S.
I prefer PayPal (my account is kelley_ward@keysight.com) but accept other forms of payments.
Little Storm Swept Point Number 3
3/16" Thick 8670M carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is coyote brown paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 4.2 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 8.5 inches
Hard Edge Knives makers mark on spine
Sheath coyote brown Kydex drilled for a small Tek Loc.
SOLD Price $50 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
http://imageshack.com/a/img538/2151/fx6WM6.jpg
DROP POINT
Steel: Nicholson 8" file (3/16" thick), forged with the edge hardened to approximately 60 Rc.
Blade Length: 4.6 inches long, flat ground with convex edge. File marks left in blade.
Overall Length: 8.8 inches long
Handle: Gutted black paracord wrapped over green sea snake skin on knifes full tang. Paracord is treated with penetrating epoxy.
Sorry no lanyard hole, the steel is to hard to drill with anything less than carbide.
Sheath: Black Kydex with three upper holes spaced for a small (mini) Tec-Loc.
Price: $55 shipped in US
I prefer PayPal (my account is kelley_ward@keysight.com) but will accept other forms of payment.
Last edited:
