I have six knives for sale. These are all hand made by me with heat treating done by Peters' Heat Treating, Inc.
Shipping is included in the price and payment can be made by USPS money order, bank check, or PayPal + 2.9%.
Knives will ship within 2 business days after I receive payment. If you want a knife then send me a PM or email.
All specifications are approximate.
Let me know if you have any questions.
These are the knives. They'll be listed 1-6 from left to right. You can click on the links under each knife for more pics.
Knife #1: Ranger $300 ($275 without firesteel) SPF
Specs:
Blade Length: 4"
Overall Length: 8.8"
Handle at thickest spot: ~0.9"
Steel: Satin finished 0.172" thick CPM 3V at 60 HRC
Handle: Tan canvas micarta with thin orange G-10 liners
Sheath: Kydex with nylon belt loop
Firesteel: 3/8" x 2.3" mischmetal with tan canvas handle, orange G-10 liner, stainless lanyard hole, and S clip
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-3.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-1.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-2.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-4.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-5.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-6.jpg
Knife #2: Ranger $280 ($260 without firesteel)
This Ranger was made with slightly thinner handle at a customer's request but the customer backed out.
Specs:
Blade Length: 4"
Overall Length: 8.8"
Handle at thickest spot: ~0.8"
Steel: Satin finished 0.172" thick CPM 3V at 59 HRC
Handle: Black linen micarta
Sheath: Kydex with nylon belt loop
Firesteel: 5/16x3" mischmetal with black linen micarta handle, white fiber liner, stainless lanyard hole, and S clip
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Blk-1.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Blk-2.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Blk-3.jpg
Knife #3: Ranger $200
This is a repost of an early model with full flat grind. The butt of this knife has a glass breaking point. There are a few very small specks of rust (small enough that it was difficult to photograph). Rather than refinishing the knife I'm just going to drop the price.
Specs:
Blade Length: 4"
Overall Length: 8.8"
Handle at thickest spot: ~0.85"
Steel: Satin finished 0.187" thick A2 at 58 HRC
Handle: Black linen micarta with thin red fiber liners
Sheath: Right handed 9-10 oz black leather
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-1.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-2.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-3.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-4.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-5.jpg
Knife #4: ATK ("Appalachian Trail Knife") $120 SOLD
This knife has a couple of small deeper grinding marks on the right side of the blade at the edge (see pic 3). I normally sell this model with sheath for $135 but I'm discounting it because it isn't perfect.
Specs:
Blade Length: 3.2"
Overall Length: 7.3"
Handle at thickest spot: 0.7"
Steel: Satin finished CPM D2 at 60 HRC
Handle: Green canvas micarta
Sheath: Kydex with nylon belt loop
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-1.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-2.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-3.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-4.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-5.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-6.jpg
Knife #5 & #6: Parkers $70 for #5 and $80 for #6
Knife #5 is the Parker on the left in the group pics. The top hole is slightly closer to the blade than knife #6. It is $10 cheaper because there are a few tiny gouges left from the stonewashed finish. It's difficult to see those spots without the right light and it was impossible to photograph.
Specs:
Blade Length: 2"
Overall Length: 5.15"
Steel: Stonewashed 0.140" thick CPM S35VN
Sheath: Kydex neck sheath
http://livknives.com/wp-content/uploads/2013/05/Parkers-1.jpg
http://livknives.com/wp-content/uploads/2013/05/Parkers-2.jpg
http://livknives.com/wp-content/uploads/2013/05/Parkers-3.jpg
http://livknives.com/wp-content/uploads/2013/05/Parkers-4.jpg
Shipping is included in the price and payment can be made by USPS money order, bank check, or PayPal + 2.9%.
Knives will ship within 2 business days after I receive payment. If you want a knife then send me a PM or email.
All specifications are approximate.
Let me know if you have any questions.
These are the knives. They'll be listed 1-6 from left to right. You can click on the links under each knife for more pics.
Knife #1: Ranger $300 ($275 without firesteel) SPF
Specs:
Blade Length: 4"
Overall Length: 8.8"
Handle at thickest spot: ~0.9"
Steel: Satin finished 0.172" thick CPM 3V at 60 HRC
Handle: Tan canvas micarta with thin orange G-10 liners
Sheath: Kydex with nylon belt loop
Firesteel: 3/8" x 2.3" mischmetal with tan canvas handle, orange G-10 liner, stainless lanyard hole, and S clip
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-3.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-1.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-2.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-4.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-5.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Tan-6.jpg
Knife #2: Ranger $280 ($260 without firesteel)
This Ranger was made with slightly thinner handle at a customer's request but the customer backed out.
Specs:
Blade Length: 4"
Overall Length: 8.8"
Handle at thickest spot: ~0.8"
Steel: Satin finished 0.172" thick CPM 3V at 59 HRC
Handle: Black linen micarta
Sheath: Kydex with nylon belt loop
Firesteel: 5/16x3" mischmetal with black linen micarta handle, white fiber liner, stainless lanyard hole, and S clip
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Blk-1.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Blk-2.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-3V-Blk-3.jpg
Knife #3: Ranger $200
This is a repost of an early model with full flat grind. The butt of this knife has a glass breaking point. There are a few very small specks of rust (small enough that it was difficult to photograph). Rather than refinishing the knife I'm just going to drop the price.
Specs:
Blade Length: 4"
Overall Length: 8.8"
Handle at thickest spot: ~0.85"
Steel: Satin finished 0.187" thick A2 at 58 HRC
Handle: Black linen micarta with thin red fiber liners
Sheath: Right handed 9-10 oz black leather
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-1.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-2.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-3.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-4.jpg
http://livknives.com/wp-content/uploads/2013/05/Ranger-A2-5.jpg
Knife #4: ATK ("Appalachian Trail Knife") $120 SOLD
This knife has a couple of small deeper grinding marks on the right side of the blade at the edge (see pic 3). I normally sell this model with sheath for $135 but I'm discounting it because it isn't perfect.
Specs:
Blade Length: 3.2"
Overall Length: 7.3"
Handle at thickest spot: 0.7"
Steel: Satin finished CPM D2 at 60 HRC
Handle: Green canvas micarta
Sheath: Kydex with nylon belt loop
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-1.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-2.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-3.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-4.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-5.jpg
http://livknives.com/wp-content/uploads/2013/05/ATK-CPM-D2-6.jpg
Knife #5 & #6: Parkers $70 for #5 and $80 for #6
Knife #5 is the Parker on the left in the group pics. The top hole is slightly closer to the blade than knife #6. It is $10 cheaper because there are a few tiny gouges left from the stonewashed finish. It's difficult to see those spots without the right light and it was impossible to photograph.
Specs:
Blade Length: 2"
Overall Length: 5.15"
Steel: Stonewashed 0.140" thick CPM S35VN
Sheath: Kydex neck sheath
http://livknives.com/wp-content/uploads/2013/05/Parkers-1.jpg
http://livknives.com/wp-content/uploads/2013/05/Parkers-2.jpg
http://livknives.com/wp-content/uploads/2013/05/Parkers-3.jpg
http://livknives.com/wp-content/uploads/2013/05/Parkers-4.jpg
Last edited:
