- Joined
- Oct 26, 2005
- Messages
- 17,124
This trapper has the "sabre" grind on the blade,like the Lanny's Clip knife. But it is a smaller knife,so if you like the Lanny's clip but it's a bit too big for your EDC ,this is one for consideration.
It is 3-5/8" closed,and 6.5" open. The blade measures 2-7/8" from the tip to the handle scale and has a 2-5/8" cutting edge. Really good looking vintage ivory micarta,inlaid & pinned ss "Bullocks" shield. "Shadow" style, (no bolster),means it's light & tough. Great EDC knife here
Blade & spring is 52100 carbon,hollow ground & razor sharp. Cut swedge,crescent nail pull and satin finish. Blade centers perfect closed. Spring is flush with the liners in all half stop positions. Walk and talk is outstanding,with glass smooth opening action. Pull is about a perfect 6, what I call medium - firm.
Great job John :thumbup:
Take a look ,Thank You
***********Sold**************
It is 3-5/8" closed,and 6.5" open. The blade measures 2-7/8" from the tip to the handle scale and has a 2-5/8" cutting edge. Really good looking vintage ivory micarta,inlaid & pinned ss "Bullocks" shield. "Shadow" style, (no bolster),means it's light & tough. Great EDC knife here
Blade & spring is 52100 carbon,hollow ground & razor sharp. Cut swedge,crescent nail pull and satin finish. Blade centers perfect closed. Spring is flush with the liners in all half stop positions. Walk and talk is outstanding,with glass smooth opening action. Pull is about a perfect 6, what I call medium - firm.
Great job John :thumbup:
Take a look ,Thank You
***********Sold**************
Last edited:
