Nathan the Machinist
KnifeMaker / Machinist / Evil Genius
Moderator
Knifemaker / Craftsman / Service Provider
- Joined
- Feb 13, 2007
- Messages
- 17,740
SOLD
First up I have two 2 flute and eight 4 flute 1/4" endmills that are 6". These are new and they're ground with a very small corner radius for improved durability. They're $20 each. This is a screaming deal for a quality endmill, limit three per person.
Next up I have eight pieces of domestically produced 3/8" black G10. They're 3 1/2" by 8 1/2". This is 89 cubic inches of material and the going rate for it is close to a dollar per cubic inch, but I buy in bulk so I have about half that in it. You can buy half of it (four sheets) for $20 or all of it for $35
Next up I have some drops of .200" Elmax. This has an austenitic stainless can rolled out with it that you'll need to grind off. I'll throw in some 3/8" and 1/4" carbon fiber drops that are sized right to be bolsters. $25
I'm going to be out of town this weekend so I'm sorry but I won't be available to answer questions.
Flat rate shipping is $10 in the USA.
Please keep sales in the sale threads to help me keep up with it. Those of you who have bought platens and chillers know how these sales work, but here is how to order:
I need you to please follow these instructions to help me keep up with everything (otherwise I have eleventy things going on and folks will fall through the cracks).
1: State your claim in this thread.
2: send me an email (not a private message) carothersknives at gmail dought com
The email should include what you are buying, your BladeForums handle (i.e.: "Nathan the Machinist"), your actual name, your shipping address and your paypal email address.
I will send a PayPal invoice to that email.
3. Pay the paypal invoice. Once it is paid, I will ship your order to the name and address you gave in your order email.
If you don't want to use paypal, we can arrange to send a check.
If there are shortages it will be based upon first come first serve who posts in this thread. I have to do it this way to keep things sane.
First up I have two 2 flute and eight 4 flute 1/4" endmills that are 6". These are new and they're ground with a very small corner radius for improved durability. They're $20 each. This is a screaming deal for a quality endmill, limit three per person.
Next up I have eight pieces of domestically produced 3/8" black G10. They're 3 1/2" by 8 1/2". This is 89 cubic inches of material and the going rate for it is close to a dollar per cubic inch, but I buy in bulk so I have about half that in it. You can buy half of it (four sheets) for $20 or all of it for $35
Next up I have some drops of .200" Elmax. This has an austenitic stainless can rolled out with it that you'll need to grind off. I'll throw in some 3/8" and 1/4" carbon fiber drops that are sized right to be bolsters. $25
I'm going to be out of town this weekend so I'm sorry but I won't be available to answer questions.
Flat rate shipping is $10 in the USA.
Please keep sales in the sale threads to help me keep up with it. Those of you who have bought platens and chillers know how these sales work, but here is how to order:
I need you to please follow these instructions to help me keep up with everything (otherwise I have eleventy things going on and folks will fall through the cracks).
1: State your claim in this thread.
2: send me an email (not a private message) carothersknives at gmail dought com
The email should include what you are buying, your BladeForums handle (i.e.: "Nathan the Machinist"), your actual name, your shipping address and your paypal email address.
I will send a PayPal invoice to that email.
3. Pay the paypal invoice. Once it is paid, I will ship your order to the name and address you gave in your order email.
If you don't want to use paypal, we can arrange to send a check.
If there are shortages it will be based upon first come first serve who posts in this thread. I have to do it this way to keep things sane.
Last edited:
