I've got a CRKT M21-SFG in LNIB condition, and a Buck Rush in ATS-34 (used) , and Spyderco Tenacious in LNIB, that I'm looking to trade away. You can trade for all or any combination of the three.
Pictures:
On the M21:
M21™-14SFG: G10 Scales,
Deep-bellied spear point blade, Combined Razor-Sharp &
Veff Serrated Cutting Edge
Blade: Length: 3.875” (9.8 cm)
Thickness: 0.14” (0.35 cm)
Steel: 8Cr14, 58-59 HRC
Closed: Handle length: 5.375” (13.7 cm)
Open: Overall length: 9.25” (23.5 cm)
Blade: Steel: 8Cr14, 58-59 HRC
Weight: 6.1 oz. (173 g)
Lockup is nice and tight on this one. No blade play in either of the four directions. Handles are G-10 and rather grippy. Blade is strong, thick, and only ever comes in a combo edge. The Veff serrations are great though. They work well for small branches, opening packages, and they're a snap to sharpen if need be. The blade has some good edge retention and is stainless. Comparable to AUS-8 (which most people think is crap, but is actually a bit above 440C, which some people praise.) It's a bit on the heavy side, but it's got heft in the hand. I have to say that this is one of the fastest opening folders I own, and it's also incredibly smooth. AutoLAWKS takes about a day to master, then it's easy and reliable.
On the Rush:
* Assisted Opening: Yes
* Blade Length: 2 1/2"(6.4 cm)
* Blade Material: ATS-34 BOS Heat treated
* Handle Material: Anodized aluminum
* Length Closed: 3 3/4" (9.5 cm)
* Locking: Yes
* One Hand: Yes
* Quantity: Yes
* Upgraded Steel: Yes
* Weight: 2.4 oz. (68.3 g)
This one is a user. The very tip (about .5mm) is chipped, I'll be honest. It wasn't abused or anything, I just noticed it. The blade is in great condition otherwise, no scratches and such. I put a new 20-30 edge on it with my Lansky. The spring for the ASAP feature is broken. You'll need to send it back to Buck and they will replace it free of charge. I'm just too lazy, and it's been resting in my safe for far to long. Lockup is good, no blade play. It's a great little knife to play with, and you can still flip it open without the asap.
On the Tenacious
length overall 7 3/4" (197mm)
blade length 3 3/8" (86mm)
blade steel 8CR13MOV
length closed 4 7/16" (113mm)
cutting edge 3 3/8" (86mm)
weight 4oz (115g)
hole diameter 1/2" (13mm)
blade thickness 1/8" (3mm)
handle material G-10
I like this knife a lot. It's fast opening, large leaf shaped blade. Plain edge. 4 position clip so you can do tip up or down for lefties and righties. Comfortable handle. No blade play.
I'm looking for (in order of preference):
Spyderco Paramilitary D2 *please*
Spyderco Police 3 G-10 PE
" Paramilitary DLC Black blade (or plain) PE
" Chinook 3
" UKPK in Orange
For any of the above, I will trade all knives, shipped CONUS. International shipping will be heavily discounted. I will reply to all offers via email.
I will also accept other Spyderco's for one or the other, if no one is willing to trade for them all.
Pictures:
On the M21:
M21™-14SFG: G10 Scales,
Deep-bellied spear point blade, Combined Razor-Sharp &
Veff Serrated Cutting Edge
Blade: Length: 3.875” (9.8 cm)
Thickness: 0.14” (0.35 cm)
Steel: 8Cr14, 58-59 HRC
Closed: Handle length: 5.375” (13.7 cm)
Open: Overall length: 9.25” (23.5 cm)
Blade: Steel: 8Cr14, 58-59 HRC
Weight: 6.1 oz. (173 g)
Lockup is nice and tight on this one. No blade play in either of the four directions. Handles are G-10 and rather grippy. Blade is strong, thick, and only ever comes in a combo edge. The Veff serrations are great though. They work well for small branches, opening packages, and they're a snap to sharpen if need be. The blade has some good edge retention and is stainless. Comparable to AUS-8 (which most people think is crap, but is actually a bit above 440C, which some people praise.) It's a bit on the heavy side, but it's got heft in the hand. I have to say that this is one of the fastest opening folders I own, and it's also incredibly smooth. AutoLAWKS takes about a day to master, then it's easy and reliable.
On the Rush:
* Assisted Opening: Yes
* Blade Length: 2 1/2"(6.4 cm)
* Blade Material: ATS-34 BOS Heat treated
* Handle Material: Anodized aluminum
* Length Closed: 3 3/4" (9.5 cm)
* Locking: Yes
* One Hand: Yes
* Quantity: Yes
* Upgraded Steel: Yes
* Weight: 2.4 oz. (68.3 g)
This one is a user. The very tip (about .5mm) is chipped, I'll be honest. It wasn't abused or anything, I just noticed it. The blade is in great condition otherwise, no scratches and such. I put a new 20-30 edge on it with my Lansky. The spring for the ASAP feature is broken. You'll need to send it back to Buck and they will replace it free of charge. I'm just too lazy, and it's been resting in my safe for far to long. Lockup is good, no blade play. It's a great little knife to play with, and you can still flip it open without the asap.
On the Tenacious
length overall 7 3/4" (197mm)
blade length 3 3/8" (86mm)
blade steel 8CR13MOV
length closed 4 7/16" (113mm)
cutting edge 3 3/8" (86mm)
weight 4oz (115g)
hole diameter 1/2" (13mm)
blade thickness 1/8" (3mm)
handle material G-10
I like this knife a lot. It's fast opening, large leaf shaped blade. Plain edge. 4 position clip so you can do tip up or down for lefties and righties. Comfortable handle. No blade play.
I'm looking for (in order of preference):
Spyderco Paramilitary D2 *please*
Spyderco Police 3 G-10 PE
" Paramilitary DLC Black blade (or plain) PE
" Chinook 3
" UKPK in Orange
For any of the above, I will trade all knives, shipped CONUS. International shipping will be heavily discounted. I will reply to all offers via email.
I will also accept other Spyderco's for one or the other, if no one is willing to trade for them all.
Last edited:
