- Joined
- Dec 31, 2009
- Messages
- 2,630
Hello Guys and Gals,
Here are a couple of GREAT little knives I hope you will like as much as I do.
The Larger one is of 10 in. hollow ground CPM154CM .143 thick, .925 high and 3.25 from tip to guard. O/A is 7.625. It has been heat treated to 60-61 RC cryo quenched and double tempered 2 hrs ea. I use sand paper and a cork belt to remove every little scratch and ripple then mirror finished the blade and satin finished it to 1200 grit.
Guard is pinned and soldered 416 stainless steel. Pin is press fit and peaned and cannot be seen.
Handle is stabalized palm wood that has a very cool chatoyancy with a deep root beer color brown color to it. Pins are 416 stainless corby rivets and green fiber liners with lanyard hole.
I will make a custom fit hand tooled and hand stitched left or right hand 8-9 ounce leather sheath that the knife will snap fit into and hold very securely yet will be easy to withdraw. I can make the sheath brown, black, or two tone brown and black.
Asking $265.00 plus $15.00 conus shipping. I accept paypal. Thank you. Alan
The smaller knife is 10 in. hollow ground 154CM .108 thick, .725 at swedge and 2.625 from tip to bolsters. O/A is 6.75 in. It has been heat treated to 60-61 RC cryo quenched and double tempered 2 hrs ea. It has been mirror finished and then satin finished to 1200 grit.
Bolsters are carbon fiber pinned very securely with .092 bronze pins.
Handle is of dyed and stabilized maple burl, with mosaic pins, black liners and lanyard hole.
Same deal with the sheath as the above knife.
Asking (SOLD) plus $10.00 conus shipping. I accept paypal. Thank you Alan
Here are a couple of GREAT little knives I hope you will like as much as I do.
The Larger one is of 10 in. hollow ground CPM154CM .143 thick, .925 high and 3.25 from tip to guard. O/A is 7.625. It has been heat treated to 60-61 RC cryo quenched and double tempered 2 hrs ea. I use sand paper and a cork belt to remove every little scratch and ripple then mirror finished the blade and satin finished it to 1200 grit.
Guard is pinned and soldered 416 stainless steel. Pin is press fit and peaned and cannot be seen.
Handle is stabalized palm wood that has a very cool chatoyancy with a deep root beer color brown color to it. Pins are 416 stainless corby rivets and green fiber liners with lanyard hole.
I will make a custom fit hand tooled and hand stitched left or right hand 8-9 ounce leather sheath that the knife will snap fit into and hold very securely yet will be easy to withdraw. I can make the sheath brown, black, or two tone brown and black.
Asking $265.00 plus $15.00 conus shipping. I accept paypal. Thank you. Alan
The smaller knife is 10 in. hollow ground 154CM .108 thick, .725 at swedge and 2.625 from tip to bolsters. O/A is 6.75 in. It has been heat treated to 60-61 RC cryo quenched and double tempered 2 hrs ea. It has been mirror finished and then satin finished to 1200 grit.
Bolsters are carbon fiber pinned very securely with .092 bronze pins.
Handle is of dyed and stabilized maple burl, with mosaic pins, black liners and lanyard hole.
Same deal with the sheath as the above knife.
Asking (SOLD) plus $10.00 conus shipping. I accept paypal. Thank you Alan
Last edited:
