- Joined
- Oct 16, 2010
- Messages
- 5,746
Greetings All!
For your consideration is this Lurquin Inspired Hunter in CPM-3V/Black G-10. The CPM-3V has been triple tempered for maximum toughness. The primaries were deeply hollow ground to .015" and 25 degree bevels ground. The swedge is dead center and even - it is almost sharp while the thumb serrations on the spine are accented with file work. The handle and the fittings were hand sanded to 2500 grit then buffed for maximum luster. The blade is satin finished to 600 grit then buffed with an ultra fine scotchbrite belt. The solder joint is perfectly executed with no pinholes. Includes an ambidextrous carry horizontal sheath - an internal cam holds the knife securely. Superb fit and finish. I hope you like it! The first "I'll take it," PM, or email gets it. $450 delivered CONUS. PayPal preferred to tsteingass@frontier.com. Thanks for viewing and your comments are appreciated.
V/R,
TK
.205" CPM-3V
HT to Rc 59-60
Triple tempered
10 1/4" OAL
5" Hollow ground blade
Nearly sharp wedge
Satin finish
Black G-10 handle - rounded butt
Stainless/black G-10 spacers
Soldered Stainless guard
8-10 oz ambidextrous horizontal carry sheath
For your consideration is this Lurquin Inspired Hunter in CPM-3V/Black G-10. The CPM-3V has been triple tempered for maximum toughness. The primaries were deeply hollow ground to .015" and 25 degree bevels ground. The swedge is dead center and even - it is almost sharp while the thumb serrations on the spine are accented with file work. The handle and the fittings were hand sanded to 2500 grit then buffed for maximum luster. The blade is satin finished to 600 grit then buffed with an ultra fine scotchbrite belt. The solder joint is perfectly executed with no pinholes. Includes an ambidextrous carry horizontal sheath - an internal cam holds the knife securely. Superb fit and finish. I hope you like it! The first "I'll take it," PM, or email gets it. $450 delivered CONUS. PayPal preferred to tsteingass@frontier.com. Thanks for viewing and your comments are appreciated.
V/R,
TK
.205" CPM-3V
HT to Rc 59-60
Triple tempered
10 1/4" OAL
5" Hollow ground blade
Nearly sharp wedge
Satin finish
Black G-10 handle - rounded butt
Stainless/black G-10 spacers
Soldered Stainless guard
8-10 oz ambidextrous horizontal carry sheath
Last edited:
