Well.......picked up a knife (sword) unexpectedly today ( 
) so I have to let a few things go.
Prices include shipping and pp fees (also can do money order or cashier's check). I have done international shipping before with 0 problems, but additional shipping charges apply.
First "I'll take it" gets it, I'd prefer to have that posted in this thread but if I'm contacted by PM or e-mail first and can post the time stamp, it's yours.
If you have any questions about specs, pictures, etc. please contact me through PM or e-mail.
This is only a start so check back. I have a few more that might end up being listed in the next few days.
NOT looking for trades right now, after the purchase today and a few boomsticks recently, I just can't do it (unless you have a XM24 and you want to trade it for the MBC, then I might be able to do a trade
)
1) Magnum Bear Cub. Great feeling little thing. Bought to be a user, but never got around using it (damn SAR 3) so even though I like the bugger, it needs to go
.1435" thick, satin finish, black paper micarta scales.
$205 SOLD
2) Military Overun Satin Jac Tactical. There were only 22 made (according to Garth). I have 3 of them, thickness varies by a couple thousandths here and there, color on the scales are fairly uniform but I do have 1 where the scales are fairly light. .194" thick with a blade length of 6 3/8" and an overall of 12". Very light for a full size knife.
$307 SOLD
3) Kill Devil Sniper Hawk from the last ganza. Once again, picked it up to be a user, but just can't do it after today. Comes with a great (like always) Mashed Cat sheath with teklock and a hank of paracord, I have never inserted the hawk into the sheath. .196" thick. Direct cost was $258, add (estimate) $15 for shipping and about 3.5% paypal. To your door for $287 SOLD
4) Clip Point Desert Camo Satin Jac Tac. Tigerhide scales. .204" thick, blade length is 6 1/8". Great knife, but on the spine of the knife, for the last 1/8 of an inch of the scales, the grind of the knife and the scales aren't perfectly matched so there is a little....lip..on either side. Not a huge deal, but full disclosure and everything.
$390 Traded
5) Custom Shop Rodent Solution. More than half of the spine has been ground and has had an edge out on it, handle has been reprofiled and has a sharp "hump" on the back similiar to a Taz Rat, and a skull crusher pommel has been added. Thickness is .213", blade length is 3 5/8" long.
$235
6) Custom Shop Satin Tank Buster. Thickness is .256", blade length is 6 1/4" long. With all the grinding done on the blade (the "swedge" on the spine, the slight hollow grind) the knife is actually a little handle heavy. Scales are black and tan G-10. Very cool knife.
Price: $435 SOLD
I reserve the right to refuse sale for feedback or lack thereof, if (for some reason) these highly dangerous items
rolleyes are prohibited in your area, please don't buy them, I have enough on my plate right now.
Thanks for looking folks.
) so I have to let a few things go.Prices include shipping and pp fees (also can do money order or cashier's check). I have done international shipping before with 0 problems, but additional shipping charges apply.
First "I'll take it" gets it, I'd prefer to have that posted in this thread but if I'm contacted by PM or e-mail first and can post the time stamp, it's yours.
If you have any questions about specs, pictures, etc. please contact me through PM or e-mail.
This is only a start so check back. I have a few more that might end up being listed in the next few days.
NOT looking for trades right now, after the purchase today and a few boomsticks recently, I just can't do it (unless you have a XM24 and you want to trade it for the MBC, then I might be able to do a trade
)1) Magnum Bear Cub. Great feeling little thing. Bought to be a user, but never got around using it (damn SAR 3) so even though I like the bugger, it needs to go
.1435" thick, satin finish, black paper micarta scales.
$205 SOLD
2) Military Overun Satin Jac Tactical. There were only 22 made (according to Garth). I have 3 of them, thickness varies by a couple thousandths here and there, color on the scales are fairly uniform but I do have 1 where the scales are fairly light. .194" thick with a blade length of 6 3/8" and an overall of 12". Very light for a full size knife.
$307 SOLD
3) Kill Devil Sniper Hawk from the last ganza. Once again, picked it up to be a user, but just can't do it after today. Comes with a great (like always) Mashed Cat sheath with teklock and a hank of paracord, I have never inserted the hawk into the sheath. .196" thick. Direct cost was $258, add (estimate) $15 for shipping and about 3.5% paypal. To your door for $287 SOLD
4) Clip Point Desert Camo Satin Jac Tac. Tigerhide scales. .204" thick, blade length is 6 1/8". Great knife, but on the spine of the knife, for the last 1/8 of an inch of the scales, the grind of the knife and the scales aren't perfectly matched so there is a little....lip..on either side. Not a huge deal, but full disclosure and everything.
$390 Traded
5) Custom Shop Rodent Solution. More than half of the spine has been ground and has had an edge out on it, handle has been reprofiled and has a sharp "hump" on the back similiar to a Taz Rat, and a skull crusher pommel has been added. Thickness is .213", blade length is 3 5/8" long.
$235
6) Custom Shop Satin Tank Buster. Thickness is .256", blade length is 6 1/4" long. With all the grinding done on the blade (the "swedge" on the spine, the slight hollow grind) the knife is actually a little handle heavy. Scales are black and tan G-10. Very cool knife.
Price: $435 SOLD
I reserve the right to refuse sale for feedback or lack thereof, if (for some reason) these highly dangerous items
rolleyes are prohibited in your area, please don't buy them, I have enough on my plate right now.Thanks for looking folks.
Last edited:
