Payment via PayPal personal option or bank transfer (USD or EUR) gets the item. For PayPal goods, please add for the fees.
Items will be sent from Switzerland and prices are inclusive of shipping via registered mail with full tracking.
I can take short videos and additional photos on request.
Cool Fall Spy 007 - $SOLD
XM-L2 neutral, blue trits, AlTin coating. No play in the switch at all. This is one of my favorite lights with a wonderful tint, expertly modded by *LASER*. Comes with the original plastic box and lanyard.
AlTin Titanium McGizmo XR19, XPG R5 - $WITHDRAWN
The light was modified by DaFABRICATA with an XPG R5 and a new heatsink, then it was sent to DatiLED for a current boost to 1 amp on high. Low level is the same. Very bright and a great beam.
XPG upgrade and heatsink can be seen here:
http://www.candlepowerforums.com/vb...te-XPG19B-PD&p=3936272&highlight=#post3936272
Arc LS Clicky Triple - $SOLD
Great condition with nice matching anno, with a neutral Datiled triple. Comes with extra 14500 twisty tail.
Arc LS orange Clicky Triple - $SOLD
[/B][/SIZE]Orange cerakote, with a neutral Datiled triple. Comes with a short twisty tail.
Maxabeam "Lite" - $WITHDRAWN
Gen II Maxabeam S/N #M8348 G2-20 . I've had this light since late 2009, with less than 15 minutes of run time. The previous two owners stated around 22 hours of usage.
You will need to source your own A123 cells, with each tube taking four cells.
The person I purchased the light from wasn't into the heavy OEM battery packs and wanted something light to power the Maxabeam. It's amazing how light and easy to carry the Maxabeam reflector/ballast housing is without the weight of the OEM battery attached to it. You can stick a single A123 battery pack in your back pocket or jacket pocket and never even notice it's there. The battery pack weighs 12oz and powers the Maxabeam for 30 minutes in normal mode, which is in most situations more than enough.
This Maxabeam setup comes with three of the A123 patented solderless power tubes that are no longer available, and a specialty A123 charger MOD EDIT: No links to non USN dealers/Maker or other Forums... that is powered by a 12 volt automotive battery or other 12 Volt DC power source.
The battery tubes utilize Anderson Power Pole connectors (http://www.powerwerx.com/anderson-po...owerpole-sets/) and include connections/connectors to allow single battery pack usage or two of the battery packs to be used in parallel. There are also connectors that allow the light to be ran off of a vehicle battery or a cigarette lighter.
Also included is a Covert IR 850 Nm filter that has a retail price of over $400. MOD EDIT: No links to non USN dealers/Maker or other Forums...
Cosmetically, the body shows surface marks and scratches but the light functions perfectly. If you need any specific close up photos, please let me know.
Items will be sent from Switzerland and prices are inclusive of shipping via registered mail with full tracking.
I can take short videos and additional photos on request.
Cool Fall Spy 007 - $SOLD
XM-L2 neutral, blue trits, AlTin coating. No play in the switch at all. This is one of my favorite lights with a wonderful tint, expertly modded by *LASER*. Comes with the original plastic box and lanyard.
AlTin Titanium McGizmo XR19, XPG R5 - $WITHDRAWN
The light was modified by DaFABRICATA with an XPG R5 and a new heatsink, then it was sent to DatiLED for a current boost to 1 amp on high. Low level is the same. Very bright and a great beam.
XPG upgrade and heatsink can be seen here:
http://www.candlepowerforums.com/vb...te-XPG19B-PD&p=3936272&highlight=#post3936272
Arc LS Clicky Triple - $SOLD
Great condition with nice matching anno, with a neutral Datiled triple. Comes with extra 14500 twisty tail.
Arc LS orange Clicky Triple - $SOLD
[/B][/SIZE]Orange cerakote, with a neutral Datiled triple. Comes with a short twisty tail.
Maxabeam "Lite" - $WITHDRAWN
Gen II Maxabeam S/N #M8348 G2-20 . I've had this light since late 2009, with less than 15 minutes of run time. The previous two owners stated around 22 hours of usage.
You will need to source your own A123 cells, with each tube taking four cells.
The person I purchased the light from wasn't into the heavy OEM battery packs and wanted something light to power the Maxabeam. It's amazing how light and easy to carry the Maxabeam reflector/ballast housing is without the weight of the OEM battery attached to it. You can stick a single A123 battery pack in your back pocket or jacket pocket and never even notice it's there. The battery pack weighs 12oz and powers the Maxabeam for 30 minutes in normal mode, which is in most situations more than enough.
This Maxabeam setup comes with three of the A123 patented solderless power tubes that are no longer available, and a specialty A123 charger MOD EDIT: No links to non USN dealers/Maker or other Forums... that is powered by a 12 volt automotive battery or other 12 Volt DC power source.
The battery tubes utilize Anderson Power Pole connectors (http://www.powerwerx.com/anderson-po...owerpole-sets/) and include connections/connectors to allow single battery pack usage or two of the battery packs to be used in parallel. There are also connectors that allow the light to be ran off of a vehicle battery or a cigarette lighter.
Also included is a Covert IR 850 Nm filter that has a retail price of over $400. MOD EDIT: No links to non USN dealers/Maker or other Forums...
Cosmetically, the body shows surface marks and scratches but the light functions perfectly. If you need any specific close up photos, please let me know.
Last edited:
