Memorial Day Memorbilia Contest 1 Week

Joined
Jan 21, 2001
Messages
1,634
About a week ago when I posted the lists which showed the Schrade model numbers and there equivilants in the Pennys, Keen Kutter, and belnap lines. I mentioned that I had also run across some interesting information which I felt would make a good contest. I decided that today would be a good day to attempt this project. Since no good deed goes unpunished I am sure this attempt will somehow run afoul be misinterpreted or in general cause me some kind of negative response however Memorial day is a tough day for me to do nothing since it brings back a lot of memories often if I go out on this day I get into trouble, so I decided this year I would get into trouble by doing this contest. Here goes.

In the mass of looseleafs ect which I have of Schrade material I found a ledger sheet. I am attaching a pic showing all but the very top of that sheet the information you see is to give you a hint for what comes later. In the end you will find that if you are like me all this info will do is confuse you.

The top of this sheet which cannot be seen in the pic ( handwritten like the rest of the sheet ) it has 5 columns each headed by a year 1972, 1973,1974,1975, 1976. Below that it has Total Knife Production Then in each column it has a number followed by an M ( million???). four of these numbers have 4 digits with a comma one has 5 digits because after the forth digit it has a decimal and a number. EXAMPLE 1,354M or 1,354.5M . These are the figures for knives sold ( and 1976 projection ) for these years which were what production was 30+ years ago from the original ledger.

I had often wondered just how many knives Schrade did produce this sheet would it seem gives that information. So todays question is how many knives would you guess that Schrade produced during this 5 year period. Now just to get everyone who might have an interest in the ball park I am going to give you one year free the first year since it was the only one with a decimal point in 1972 Schrade produced 2,291.5 M knives. So armed with this information and considering the fascination many seem to have with statistics here is a chance to get the granddaddy statistic of all and to win a prize doing it.

I have decided to give 3 first prizes each one basicly the same a packet of at least 50 original Schrade product brochures assorted and my choice. ( what ever I grab ). They will be similar but not exactly the same as 6628836183, 6628835329 the ones in these two auctions. ( Which I have had on numerous times ). There is no cost to the winner postage ect is on me. I will ( hopefully ) post the winners next Tuesday and show the actual figures at the top of the page. I really could use some help in correlating the answers a listing of any one interested who gives a guess. ( if anyone gives a guess ) In the past Micheal has done this If you can help Micheal correlating I would appreciate it. Or anyone elses help, However if not I will try to get it done myself. That is if anyone wishes to take a guess. Remember it is a total guess for a five year period 72,73,74,75,76 and I have given you 1972. So lets see how bad this idea gets screwed up. Here is a chance to acquire a group of originjal Schrade memorbilia and all you have to do is give me a total number in millions for those five years.
150813760.jpg
. Good Luck to all . Just a last note on this Memorial day please keep all those who gave some and those that gave all in your hearts and memories . LT.
 
A really unique contest LT! I'll go first and show my ignorance at reading corporate P&L sheets.

Gross annual sales for the period 1972-1976:

Codger - $36,429,000 Meeeeep! Wrong anser!!

Codger

I'll try again later. Early bird gets the worm, but second mouuse gets the cheese!
 
NO no no Micheal my fault what we are looking for is the number of knives sold I gave you 72 . I told you the sheet would just confuse it is just for reference to guess the actual number of millions of knives sold during that period. Not the amount of money. Good try please come back and try again. Ask any questions this was difficult to post without it being confusing. LT
 
Thanks for the contest. I figured, based upon an 8.5% increase per year using 1972 production numbers. This does not account for indivual knife increases, decreases, or new model introduction. But if I were running the company, I'd figure on about an 8.5% target growth:

1972: 2,300,000 (rounded up the baseline)
1973: 2,495,500
1974: 2,707,618
1975: 2,937,765
1976: 3,187,475

Total knife production over the 5 year period of 13,628,357. That's my guess.
 
LT here is my guess
GOD BLESS ALL WHO GAVE AND ALL WHO ARE GIVING
Thanks randy

My guess is 12,741,500
 
I will say, production was 12,741,500

1972 2,291,500
1973 2,250,000
1974 2,475,000
1975 2,725,000
1976 3,000,000

Paul
 
Fly your flag today to honor those who give it their all...and to remember those who gave all.

I'll say...

12,741,500

Thanks for the mental gymnastics...:eek: ;)

Bill
 
Now you guys are ball parking it Sheathmaker try again not dollars actual knives produced. 72 is over 2 mill by itself so unless you are missing a digit your answer of knife numbers is in thousands Thanks to all for participating. Feel free to enter again or amend a number. Micheal once again a plea to correlate down the road bids in order ( if you can ). LT
 
I am afraid I will set this one out and wait for the answer. My head is hurting:eek:

Dale
 
Come on Dale we need a unified effort think about it you have the figure from 72 as a given, just look at the figures you can see, and you can see if sales went up ( hint UP ) or down or just add a yearly percentage add it together and take a shot. All you are trying to find out how many millions were made which will be proportional to sales. Heck you have a lot more information in this than you would guessing how many jelly beans in a jar. Remember you have a week and heck I am paying 3 winners ( at least ) if I get a decent response perhapes I can do more. Simple question how many knives did Schrade produce from 72 through 76.

One of the reasons I did this was to show just how much american industry was lost just by losing Schrade ( a small outfit ) imagine when large firms go under. In 72 they did over 2 million knives can you imagine what they were selling in 2003. Someone on here once remarked to me that foreign interest really didnt care about a small outfit like Schrade. I feel they did and do. Schrade was a small chip in the game but even they represented millions and millions of american products. Lets go Dale looking for input ( er please). LT PS Dale I will try to send out those blanks we talked about this week ( got to dig them out ). Been a bit hectic I just put in a state of the art burglar and fire alarm. Before they came to put it in which took a couple of days. I had one spot with an air conditioner which I felt might be a bit damaged ( it had a bit of water damage from the air conditioner over the years.) So when I went to check it the whole damn wall crumbled that repair ( a gaping hole) in the wall took a couple of days to repair. especially by myself and getting it done before the alarm guys arrived. Keeping the cats away from that area was also a challange as well. Oh well all done another great Mr Machine the mechanical genius repair. What do I know no one told me that you do not repair holes in houses with lined up 4X4s it sure does make it strong though.
 
I think that the total, along with a few others is

12,741.500

Thanks......Rusty 1
 
Since I, blankmeister, have been appointed Head Tally Whacker, here is the talley so far:

1. waliguy - 13,648,357
2. w5rwu - 13,159,000 and 12,741,500 (please clarify which entry to use)
3. sheathmaker - 12,741,500
4. El Lobo - 12,741,500
5. dannubee - 14,648,000
6. delander - 12,863,000
7. Rusty1 - 12,741,500
8. cykc - 14,571,600
9. Codger - 12,741,500
10. textoothpk - 14,000,000

Codger
 
Well done and Thankyou. Field commission put an extra stripe on for initiative in the line of duty. LT PS do not forget your entry and where is Dale ?
 
Gunny Codger???

I think cykc is 14,571,600...but, I've been wrong a bunch lately.

Bill
 
As for my entry, I must agree with the figure of 12,741,500 based upon the information as given.

But.... your point of just how much they produced is well taken. And the years involved in this illustration were a decade before the "glory years" of the 1980's when Schrade had banner sales years. Any way you cut it, production of over two million units is a significant portion of the cutlery market, and an important part of the economy of the people of Ellenville NY, NY State, and the U.S.
 
El Lobo said:
Gunny Codger???

I think cykc is 14,571,600...but, I've been wrong a bunch lately.

Bill
Thankyou for the correction Bill. Wrong lately? You have been nearly always correct. Except in your insistence that knives that collapse are best.

Codger Fixed Blankmeister and Head Striped tally whacker. Whew!
 
Back
Top