For starters, these knives were carried, but remain in great shape. I'm not looking for trades at this time. PayPal only please. If you have questions, email dennyroweiii@gmail-dot-com First "I'll take it" with payment wins!
The Benchmade Mini-Infidel: Asking $275, $250SHIPPED CONUS
Specifications:
D2 tool steel blade (60-62 HRC)
Blade Length: 3.10" (7.87 cm)
Blade Thickness: 0.09" (2.28 mm)
Open: 7.10" (12.35 cm)
Closed: 4.00" (10.16 cm)
Weight: 3.40 oz. (100.55 g)
Handle Thickness: 0.54" (13.71 mm)
Made in USA
Fires great! Right after I pulled the knife from my EDC, I dropped it off at the factory and they sharpened the blade, and also REPLACED ALL OF THE INTERNALS. That's right, the guts of this knife are brand new! There are a few scratches on the handle, but I've provided a great many pics for full disclosure.
Comes with everything in the picture
The Microtech Ultratech: Asking $SOLD SHIPPED CONUS
Overall Length: 8.50"
Blade Length: 3.44"
Blade Material: CTS-204P (roughly the same as M390)
Handle Length: 4.625"
Closed Length: 5.06"
Handle Material: 6061-T6 Aluminum
This knife fires amazingly! The screws will need to be tightened upon arrival. I have NEVER disassembled this knife, as I don't have the correct bit to do so. If I had the bit, I would tighten the screws for you. I sharpened the knife at 20 degrees per side, as I was unhappy with the factory edge. The glass reader is slightly blunted from attempting to break a beer bottle. Again, many pics for full disclosure.
The whole kit:
As if this needs to be said:
It is the responsibility of the buyer, not the seller, to ascertain, and obey, all applicable local, state, federal and international laws in regard to the possession, and use, for the purchase of this knife. Consult your local and state laws before purchasing if you are in doubt. Absolutely no sales to minors. By purchasing this knife, the buyer represents that it will be used in a lawful manner and that he/she is of legal age.
The Benchmade Mini-Infidel: Asking $275, $250SHIPPED CONUS
Specifications:
D2 tool steel blade (60-62 HRC)
Blade Length: 3.10" (7.87 cm)
Blade Thickness: 0.09" (2.28 mm)
Open: 7.10" (12.35 cm)
Closed: 4.00" (10.16 cm)
Weight: 3.40 oz. (100.55 g)
Handle Thickness: 0.54" (13.71 mm)
Made in USA
Fires great! Right after I pulled the knife from my EDC, I dropped it off at the factory and they sharpened the blade, and also REPLACED ALL OF THE INTERNALS. That's right, the guts of this knife are brand new! There are a few scratches on the handle, but I've provided a great many pics for full disclosure.
Comes with everything in the picture
The Microtech Ultratech: Asking $SOLD SHIPPED CONUS
Overall Length: 8.50"
Blade Length: 3.44"
Blade Material: CTS-204P (roughly the same as M390)
Handle Length: 4.625"
Closed Length: 5.06"
Handle Material: 6061-T6 Aluminum
This knife fires amazingly! The screws will need to be tightened upon arrival. I have NEVER disassembled this knife, as I don't have the correct bit to do so. If I had the bit, I would tighten the screws for you. I sharpened the knife at 20 degrees per side, as I was unhappy with the factory edge. The glass reader is slightly blunted from attempting to break a beer bottle. Again, many pics for full disclosure.
The whole kit:
As if this needs to be said:
It is the responsibility of the buyer, not the seller, to ascertain, and obey, all applicable local, state, federal and international laws in regard to the possession, and use, for the purchase of this knife. Consult your local and state laws before purchasing if you are in doubt. Absolutely no sales to minors. By purchasing this knife, the buyer represents that it will be used in a lawful manner and that he/she is of legal age.
Last edited:
