CPE_Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 29, 2012
- Messages
- 1,704
Good Afternoon,
This is a design I did last summer and the blade has been sitting around for months waiting on the sheath. This time I did leather lined kydex with a copper wrap for IWB carry. There is a full size rhino with a full 4 finger handle and larger blade coming some day when I get caught up. Its only a drawing at the moment.
I kept this one to 2 15/16" to the front of the scale so it is below the maximum limit most places even if they consider the plunge area in front of the scale part of the blade. I pulled the scale and handle farther in front of the first finger than I normally do to increase the reach without increasing the cutting edge. Cutting edge is 2 3/4. The handle is very intuitive, you can make a fist around it and it seats perfect in your palm. I have an XL glove sized hand. If your hand is a lot bigger than that the front finger well may be an issue for you. It is 1 1/8" at the opening tapering down to 3/4"
The blade is hollow ground on the recurve portion and clip on an 8" wheel and the tip is flat ground. Sheath is leather lined kydex.
The IWB picture is on the left side for right hand cross draw. I took it in a mirror so it looks like it is on the right.
This blade is made from 3/16" Magnacut ground to 400 grit and finished on an ultra fine scotch brite belt. Handle is burlap micarta with 9 micarta pins
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 3/16" Magnacut
Grind: Compound
Blade: 2 15/16"
Handle Material: Burlap micarta with 9 micarta pins
Overall Length: 6"
Sheath: leather lined kydex
Weight: 3.4 ounces 6.35 ounces with the sheath
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
This is a design I did last summer and the blade has been sitting around for months waiting on the sheath. This time I did leather lined kydex with a copper wrap for IWB carry. There is a full size rhino with a full 4 finger handle and larger blade coming some day when I get caught up. Its only a drawing at the moment.
I kept this one to 2 15/16" to the front of the scale so it is below the maximum limit most places even if they consider the plunge area in front of the scale part of the blade. I pulled the scale and handle farther in front of the first finger than I normally do to increase the reach without increasing the cutting edge. Cutting edge is 2 3/4. The handle is very intuitive, you can make a fist around it and it seats perfect in your palm. I have an XL glove sized hand. If your hand is a lot bigger than that the front finger well may be an issue for you. It is 1 1/8" at the opening tapering down to 3/4"
The blade is hollow ground on the recurve portion and clip on an 8" wheel and the tip is flat ground. Sheath is leather lined kydex.
The IWB picture is on the left side for right hand cross draw. I took it in a mirror so it looks like it is on the right.
This blade is made from 3/16" Magnacut ground to 400 grit and finished on an ultra fine scotch brite belt. Handle is burlap micarta with 9 micarta pins
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 3/16" Magnacut
Grind: Compound
Blade: 2 15/16"
Handle Material: Burlap micarta with 9 micarta pins
Overall Length: 6"
Sheath: leather lined kydex
Weight: 3.4 ounces 6.35 ounces with the sheath
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
Last edited:
.