I've got a couple of knives for trade. Mostly used, but well cared for. Sharp, thinned out edges, no rust or gunk built up etc. Photos of any knife available upon request.
**Trade Pending**5. Endura 3 user. This was SE, but I ground it down to PE and thinned out the blade some. Looks ugly, but functions great and has plenty of life left in it. Started sharpening it flat to the stone but never finished, but it will still outcut any stock Endura. ATS55 bladesteel, no boye dent. Very solid lockup, only a tiny hint of vertical play found in most Spyderco lockbacks. Would make a great beater.
6. Buck 112. Missing the last 1/4 inch or so of the tip. Neds to be re-ground, sent to Buck or you could just use it as is and have a good prying tip. Brass shows a few wear marks. Solid lockup and sharp edge, just needs some tip work.
7. Kershaw Vapor. New, unused, comes with box and everything. Someone bought it as a gift for me but I prefer my Leek.
---------------------
Interested in the following knives
Boker Trance
Byrds (Specifically G10 Robin and Flatbyrd)
BM Minigrip (With opening hole)
Kershaw Leeks (Only certain variations, just let me know what you have), MiniMojo, Speed Bump and a few other models
Buck Hartsook and other similar sized FB's
Victorinox Large locking models, looking for one with a sliding button lock
Bark River Mikro / Mini Canadian.
Spydercos (UKPK / Caly models in particular)
Hatchets and axes (Would like an axe around 20 inches in length like the Wetterlings large Hunter, but will take a look at hatchets and longer models)
Raumien@gmail.com for offers or questions. Thanks.
**Trade Pending**5. Endura 3 user. This was SE, but I ground it down to PE and thinned out the blade some. Looks ugly, but functions great and has plenty of life left in it. Started sharpening it flat to the stone but never finished, but it will still outcut any stock Endura. ATS55 bladesteel, no boye dent. Very solid lockup, only a tiny hint of vertical play found in most Spyderco lockbacks. Would make a great beater.
6. Buck 112. Missing the last 1/4 inch or so of the tip. Neds to be re-ground, sent to Buck or you could just use it as is and have a good prying tip. Brass shows a few wear marks. Solid lockup and sharp edge, just needs some tip work.
7. Kershaw Vapor. New, unused, comes with box and everything. Someone bought it as a gift for me but I prefer my Leek.
---------------------
Interested in the following knives
Boker Trance
Byrds (Specifically G10 Robin and Flatbyrd)
BM Minigrip (With opening hole)
Kershaw Leeks (Only certain variations, just let me know what you have), MiniMojo, Speed Bump and a few other models
Buck Hartsook and other similar sized FB's
Victorinox Large locking models, looking for one with a sliding button lock
Bark River Mikro / Mini Canadian.
Spydercos (UKPK / Caly models in particular)
Hatchets and axes (Would like an axe around 20 inches in length like the Wetterlings large Hunter, but will take a look at hatchets and longer models)
Raumien@gmail.com for offers or questions. Thanks.
