I am open to trades, but mainly looking for custom folders from makers such as Rick Barrett, Robert Carter, Todd Begg, Crusader Forge, Ferrum Forge, Sergey Rogovets, etc. I prefer bronze anodizing, flipper action with tanto or wharncliffe grinds. Butcher style blades are cool too. No liner-locks or chisel grinds.
All of these blades are unused, uncarried and in left-the-factory condition. All include the cardboard sheath (good for storage and shipping only) unless otherwise noted. Don't poke holes in the cardboard sheath, lace it up with parachord and then try and carry it on your back into the woods. The sheath will fail and the entire Busse community will laugh at you. There will be a picture of you on the multi-TV setup at the Blade induction dinner. There will be a sticky post of you on the Busse forum for everyone to post comments on. It will just plain suck...
***PLEASE NOTE: The First "I'll take it" posted (in a new response) to this thread gets the knife or knives specified, PM me after for payment information. If you are waiting for a question to be answered and someone posts that they will take it, it's theirs. That is the only way I can be fair. Also, the prices will remain after the knife is sold.
All prices include shipping and paypal fees, no "net to me" here. All multi-sword sales will receive a small discount due to reduced shipping costs. The Butaniku sets are already discounted unless you buy an additional knife as well.
Click the link below each thumbnail for the full picture.
AK47 Cerakote Red and Black = $900 SOLD
Steel type: INFI
Blade Length: 18.5"
Blade Thickness: .187"
Overall Length: 29"
Note: The cerakote was applied after the handles were attached, so they are coated as well.
http://i.imgur.com/gGFAm7K.jpg
AK47 Cerakote Gray and White = $900 SOLD
Steel type: INFI
Blade Length: 18.5"
Blade Thickness: .187"
Overall Length: 29"
Note: The cerakote was applied after the handles were attached, so they are coated as well.
http://i.imgur.com/oOvxm8w.jpg
Butaniku Long Gray w/Black G10 = $1800 -> $1750
Steen Type : INFI
Blade Length: 31.5"
Blade Thickness: .25"
Overall Length: 43.5"
Note: There is a slight discoloration on the tip in which the steel is slightly whiter. This is how it arrived from Busse and is hardly noticeable.
http://i.imgur.com/3bSE5KH.jpg
Butaniku Short Gray w/Black Paper Micarta = $1550 -> $1500
Steen Type : INFI
Blade Length: 23.5"
Blade Thickness: .25"
Overall Length: 35.5
http://i.imgur.com/lBs8ENy.jpg
Buy Both Gray Butaniki as a set for $3250 -> $3200
(Set price is gone if just one sells)
Butaniku Long Black w/Halloween G10 = $1900 -> $1850
Steen Type : INFI
Blade Length: 31.5"
Blade Thickness: .25"
Overall Length: 43.5"
http://i.imgur.com/JWWLHia.jpg
Butaniku Short Black w/Halloween G10 = $1700 -> $1650
Steen Type : INFI
Blade Length: 23.5"
Blade Thickness: .25"
Overall Length: 35.5
http://i.imgur.com/9eq64ST.jpg
Buy Both Halloween Butaniki as a set for $3500 -> $3400
(Set price is gone if just one sells)
Gladius Black w/Halloween G10 (BB Kydex Sheath) = $1300 -> $1200
Steen Type : INFI
Blade Length: 15.25"
Blade Thickness: .30"
Overall Length: 23.25
http://i.imgur.com/FveHcDj.jpg
Moab Satin w/Black and Green G10 = $2500 -> $2400
Steen Type : INFI
Blade Length: 14.25
Blade Thickness: .340
Overall Length: 20.5
http://i.imgur.com/u2IsDre.jpg?1
Moab Sage w/Sandstorm G10 (BB Spineless Kydex Sheath) = $1900 -> $1800
Steen Type : INFI
Blade Length: 14.25
Blade Thickness: .340
Overall Length: 20.5
http://i.imgur.com/HqyPCJr.jpg
All of these blades are unused, uncarried and in left-the-factory condition. All include the cardboard sheath (good for storage and shipping only) unless otherwise noted. Don't poke holes in the cardboard sheath, lace it up with parachord and then try and carry it on your back into the woods. The sheath will fail and the entire Busse community will laugh at you. There will be a picture of you on the multi-TV setup at the Blade induction dinner. There will be a sticky post of you on the Busse forum for everyone to post comments on. It will just plain suck...
***PLEASE NOTE: The First "I'll take it" posted (in a new response) to this thread gets the knife or knives specified, PM me after for payment information. If you are waiting for a question to be answered and someone posts that they will take it, it's theirs. That is the only way I can be fair. Also, the prices will remain after the knife is sold.
All prices include shipping and paypal fees, no "net to me" here. All multi-sword sales will receive a small discount due to reduced shipping costs. The Butaniku sets are already discounted unless you buy an additional knife as well.
Click the link below each thumbnail for the full picture.
AK47 Cerakote Red and Black = $900 SOLD
Steel type: INFI
Blade Length: 18.5"
Blade Thickness: .187"
Overall Length: 29"
Note: The cerakote was applied after the handles were attached, so they are coated as well.
http://i.imgur.com/gGFAm7K.jpg
AK47 Cerakote Gray and White = $900 SOLD
Steel type: INFI
Blade Length: 18.5"
Blade Thickness: .187"
Overall Length: 29"
Note: The cerakote was applied after the handles were attached, so they are coated as well.
http://i.imgur.com/oOvxm8w.jpg
Butaniku Long Gray w/Black G10 = $1800 -> $1750
Steen Type : INFI
Blade Length: 31.5"
Blade Thickness: .25"
Overall Length: 43.5"
Note: There is a slight discoloration on the tip in which the steel is slightly whiter. This is how it arrived from Busse and is hardly noticeable.
http://i.imgur.com/3bSE5KH.jpg
Butaniku Short Gray w/Black Paper Micarta = $1550 -> $1500
Steen Type : INFI
Blade Length: 23.5"
Blade Thickness: .25"
Overall Length: 35.5
http://i.imgur.com/lBs8ENy.jpg
Buy Both Gray Butaniki as a set for $3250 -> $3200
(Set price is gone if just one sells)
Butaniku Long Black w/Halloween G10 = $1900 -> $1850
Steen Type : INFI
Blade Length: 31.5"
Blade Thickness: .25"
Overall Length: 43.5"
http://i.imgur.com/JWWLHia.jpg
Butaniku Short Black w/Halloween G10 = $1700 -> $1650
Steen Type : INFI
Blade Length: 23.5"
Blade Thickness: .25"
Overall Length: 35.5
http://i.imgur.com/9eq64ST.jpg
Buy Both Halloween Butaniki as a set for $3500 -> $3400
(Set price is gone if just one sells)
Gladius Black w/Halloween G10 (BB Kydex Sheath) = $1300 -> $1200
Steen Type : INFI
Blade Length: 15.25"
Blade Thickness: .30"
Overall Length: 23.25
http://i.imgur.com/FveHcDj.jpg
Moab Satin w/Black and Green G10 = $2500 -> $2400
Steen Type : INFI
Blade Length: 14.25
Blade Thickness: .340
Overall Length: 20.5
http://i.imgur.com/u2IsDre.jpg?1
Moab Sage w/Sandstorm G10 (BB Spineless Kydex Sheath) = $1900 -> $1800
Steen Type : INFI
Blade Length: 14.25
Blade Thickness: .340
Overall Length: 20.5
http://i.imgur.com/HqyPCJr.jpg
Last edited:
