More knife blanks - Heat treated - Mostly 52100

Feedback: +8 / =0 / -0
Joined
Jan 10, 2015
Messages
1,673
I think this is nearing the last bit of blanks I have heat treated by Peters laying around.

#1 (SOLD) & #2 (SOLD) are 52100 at 62 hardness. 7.6 and 7.15 inches. .135 thick. 50 and 52 high respectively. $35 each. (SOLD)

#3 (Sold) is a Usuba blank with the Ura grind started. Just rough, not near finished. Might be able to finish by hand but would be some work. $30

#4 Is a thicker blank intended as Mioroshi deba. Could be taken down to Gyuto thickness with some grinding work. $35

#5 is my take on a Nessmuk style. A friend asked for this, sorry Tony! This is the only AEBL in the lot. Unground. Has enough meat in the handle to shape it a bit. $25

#6 This is a hunter I was working up. Still lots of meat on it to reshape if you like. 52100 at 62. $25

#7 (Sold) is the last Mioroshi deba that I actually started. Ura is very near finished and should be finished by hand. Put in the single bevel and finish it off. Pretty sure it's 52100 as it's showing rust from the last grind. "might' possibly be AEBL though, but I think 52100. $40

Call it here and DM me with paypal info and physical address for shipping quote and invoicing.
Thanks!

KnifeBlanks-1.jpg KnifeBlanks-2.jpg KnifeBlanks-3.jpg
 
Last edited:
If you got any more 52100 kitchen knife blanks like 1 or 2 let me know! bowdude1300 (at) gmail dot com
 
Back
Top