galvanic1882
Platinum Member
- Joined
- Sep 13, 2007
- Messages
- 1,254
I have more knives listed for sale today plus I have lowered the prices on all of the knives that I have listed before. So please look this list over to see the price reductions. Please email me at galvanic1882@yahoo.com if you are interested.
Shipping is 7.00 for priority mail from the USPS going to the CONUS only, If you are out of the US let me know and want one of them please email me to discuss it. Again if you buy 2 or more knives shipping is on me.
I am having trouble downloading pictures to the site so please email me if you are interested in any of them and I will get pictures to you.
Western States celluloid handled small pen knife with buffalo etch, 2 1/2" closed and sweet little knife. The blades have good walk and talk. 75
Ulster marlin spike knife, similar to the sea scout but does not have the shield. Knife has been lightly cleaned but the blade appears about full. No chips or cracks in the bone handles. 100
Maher Grosh etched pen knife, made by Schrade, 3 3/8" closed and unused mint. 85
The next 2 are Levering A1 Knife Co New York. First one has plan bolsters and is 3 5/8" closed. Blades walk and talk and the knife appears unused and mint except for a crack in the back handle at the center pin. Still a nice knife. 150
The second one has rattail bolster top and bottom. Nice beefy knife that is 3 5/8" closed also with no chips or cracks in the bone handles. Main blade is a bit slow but the pen snaps better. 175
HS&B Eureka jack, 3 3/4" closed. Both blades snap well on the close but are slow on the open. This is a rare pattern and was probably made by NYK. The handles are Ivory in my opinion but one person that looked at it said they are bone. There is grain lines in them? 150
Electric Cutlery Walden NY bone handled jack knife EDC knife, bone handles but the blades are down but a nice knife to carry and use. 50
Eagle Phila pen knife. 3 5/8" closed and unused. Eagle bought seconds for companies and restamped them. This one has NYK bone for sure. Blades walk and talk and bone handles are chip and crack free. 75
Camillus bone handled jack, 3 line mark. close to 3 3/4" closed. Knife has been used. No chips or cracks in the bone handles and the blades walk and talk. 75
A F Bannister Newark NJ, bone handled dogleg jack, EDC knife? 3 3/4" closed and the blades have great snap. No chips or cracks in the bone handles. The knife has been used and the main blade is down some. Still a great knife for your pocket. Nice rattail bolsters. 50
Challenge Cutlery metal handled scout knife. This is a rare knife in any condition. Knife has seen use and the tale end of the etch OUT is faintly there. No digs or dents in the handles. 500 Please email me for pictures of this one
Union Cut Co Olean NY, pre Ka-Bar. 2 bladed jack with an alligator wrench on the end that does not fold. There is one shown in LV4 on page 294 that is marked Ariel, I emailed Bernie on this and he said Union might have made them? Not sure but this is a rare knife also. 4 5/8" closed counting the wrench. The shield is off and appears that it moved at one point. No cracks or chips in the handles and the blades appear full with some patina on them. Nice walk and talk. 300 Please email me for pictures of this one.
Wahkonsa Cutlery Co bullhead jack, 3 3/4" closed with nice cocobolo or walnut handles not sure which. Blades walk and talk well. Beefy knife and very rare mark. I think it's been lightly cleaned 225
S&M Titusville 3 14/16" closed, great worn groove handles that are chip and crack free. Blades have nice walk and talk but the pen is slower, lightly cleaned. 150
John Primble Inda Steel works, 2 bladed sowbelly, great pattern and the blades seem to have seen little use. There is a crack at the top pin front handle otherwise they are good. Both blades are tight and have good walk and talk but the main a bit slower on the close. 3 3/4" closed 225
Maher Grosh surveyor pattern with screws in the handles and covered backspring. 4 " closed. Blades have some walk and talk still but the spey blade is slow. Letters engraved on 3 of the 4 bolsters. Nice pattern that's a bit hard to find. Knife has been used and blades are down some. 100
John Primble India Steel works, 3 15/16" closed, bone handles that appear to be chip and crack free, Blades still have walk and talk although it's been used and the blades are down. 75
John Pritzlaff Hardware Co, 3 15/16" closed, ebony handles are chip and crack free. Blades have very strong walk and talk. Knife was probably made by NYK Co. The etch is still on the bottom of the sabor grind of the main blade. Has seen use and the blades have a great patina to them. 125
E.K. Tryon Co Phila. PA, 4" closed, Bone handles are chip and crack free, blade walks and talks smoothly. Knife I believe has been lightly cleaned and the blade appears about full. 100
WR Case & Sons Bradford Pa, tang stamp is faint but mostly there, 4" closed. Handles are Tortoise Shell but not sure if it's real or not, good chance they are celluloid. Blade is slow and has been used with patina, 100
Empire dogleg, 3 3/4" closed. Blades walk and talk abit but not strong. Small crack at the middle pin on the back handle. 125
Bayonne Knife Co Bayonne NJ, 3 15/16 closed. No cracks or chips in the handles. Blade has nice walk and talk. Old Iron hardware. 125
Cattaraugus, 4 1/8" closed. Pattern number on the back tang 11049 which is correct for the knife. Blade walks and talks ok. Old Iron hardware. 125
Shapleigh Hardware St Louis, 4 1/2" closed. Bottom pin on the back has crack above and below it. Strong spring. Again old Iron hardware. 100
Remington 5" closed, R1240 on the back tang. No chips or cracks in the handles. Knife has been cleaned and the blade action is abit slow. It does snap on the close but not much. 100
Shipping is 7.00 for priority mail from the USPS going to the CONUS only, If you are out of the US let me know and want one of them please email me to discuss it. Again if you buy 2 or more knives shipping is on me.
I am having trouble downloading pictures to the site so please email me if you are interested in any of them and I will get pictures to you.
Western States celluloid handled small pen knife with buffalo etch, 2 1/2" closed and sweet little knife. The blades have good walk and talk. 75
Ulster marlin spike knife, similar to the sea scout but does not have the shield. Knife has been lightly cleaned but the blade appears about full. No chips or cracks in the bone handles. 100
Maher Grosh etched pen knife, made by Schrade, 3 3/8" closed and unused mint. 85
The next 2 are Levering A1 Knife Co New York. First one has plan bolsters and is 3 5/8" closed. Blades walk and talk and the knife appears unused and mint except for a crack in the back handle at the center pin. Still a nice knife. 150
The second one has rattail bolster top and bottom. Nice beefy knife that is 3 5/8" closed also with no chips or cracks in the bone handles. Main blade is a bit slow but the pen snaps better. 175
HS&B Eureka jack, 3 3/4" closed. Both blades snap well on the close but are slow on the open. This is a rare pattern and was probably made by NYK. The handles are Ivory in my opinion but one person that looked at it said they are bone. There is grain lines in them? 150
Electric Cutlery Walden NY bone handled jack knife EDC knife, bone handles but the blades are down but a nice knife to carry and use. 50
Eagle Phila pen knife. 3 5/8" closed and unused. Eagle bought seconds for companies and restamped them. This one has NYK bone for sure. Blades walk and talk and bone handles are chip and crack free. 75
Camillus bone handled jack, 3 line mark. close to 3 3/4" closed. Knife has been used. No chips or cracks in the bone handles and the blades walk and talk. 75
A F Bannister Newark NJ, bone handled dogleg jack, EDC knife? 3 3/4" closed and the blades have great snap. No chips or cracks in the bone handles. The knife has been used and the main blade is down some. Still a great knife for your pocket. Nice rattail bolsters. 50
Challenge Cutlery metal handled scout knife. This is a rare knife in any condition. Knife has seen use and the tale end of the etch OUT is faintly there. No digs or dents in the handles. 500 Please email me for pictures of this one
Union Cut Co Olean NY, pre Ka-Bar. 2 bladed jack with an alligator wrench on the end that does not fold. There is one shown in LV4 on page 294 that is marked Ariel, I emailed Bernie on this and he said Union might have made them? Not sure but this is a rare knife also. 4 5/8" closed counting the wrench. The shield is off and appears that it moved at one point. No cracks or chips in the handles and the blades appear full with some patina on them. Nice walk and talk. 300 Please email me for pictures of this one.
Wahkonsa Cutlery Co bullhead jack, 3 3/4" closed with nice cocobolo or walnut handles not sure which. Blades walk and talk well. Beefy knife and very rare mark. I think it's been lightly cleaned 225
S&M Titusville 3 14/16" closed, great worn groove handles that are chip and crack free. Blades have nice walk and talk but the pen is slower, lightly cleaned. 150
John Primble Inda Steel works, 2 bladed sowbelly, great pattern and the blades seem to have seen little use. There is a crack at the top pin front handle otherwise they are good. Both blades are tight and have good walk and talk but the main a bit slower on the close. 3 3/4" closed 225
Maher Grosh surveyor pattern with screws in the handles and covered backspring. 4 " closed. Blades have some walk and talk still but the spey blade is slow. Letters engraved on 3 of the 4 bolsters. Nice pattern that's a bit hard to find. Knife has been used and blades are down some. 100
John Primble India Steel works, 3 15/16" closed, bone handles that appear to be chip and crack free, Blades still have walk and talk although it's been used and the blades are down. 75
John Pritzlaff Hardware Co, 3 15/16" closed, ebony handles are chip and crack free. Blades have very strong walk and talk. Knife was probably made by NYK Co. The etch is still on the bottom of the sabor grind of the main blade. Has seen use and the blades have a great patina to them. 125
E.K. Tryon Co Phila. PA, 4" closed, Bone handles are chip and crack free, blade walks and talks smoothly. Knife I believe has been lightly cleaned and the blade appears about full. 100
WR Case & Sons Bradford Pa, tang stamp is faint but mostly there, 4" closed. Handles are Tortoise Shell but not sure if it's real or not, good chance they are celluloid. Blade is slow and has been used with patina, 100
Empire dogleg, 3 3/4" closed. Blades walk and talk abit but not strong. Small crack at the middle pin on the back handle. 125
Bayonne Knife Co Bayonne NJ, 3 15/16 closed. No cracks or chips in the handles. Blade has nice walk and talk. Old Iron hardware. 125
Cattaraugus, 4 1/8" closed. Pattern number on the back tang 11049 which is correct for the knife. Blade walks and talks ok. Old Iron hardware. 125
Shapleigh Hardware St Louis, 4 1/2" closed. Bottom pin on the back has crack above and below it. Strong spring. Again old Iron hardware. 100
Remington 5" closed, R1240 on the back tang. No chips or cracks in the handles. Knife has been cleaned and the blade action is abit slow. It does snap on the close but not much. 100