MSC Stub Yeti, Kirby Lambert Orion, Greg Lightfoot M1, Jim Burke/Tashi Bharucha VSS, Aegis Xiphos, Philip Booth Destiny

Status
Not open for further replies.

ShadyMethods

Platinum Member
Feedback: +315 / =0 / -1
Joined
Apr 9, 2016
Messages
3,458
If you have any questions about what's here, let me know and I'll do my best to help you out. For more details, specs, or pictures, just ask and I'll get back to you as soon as I can. I don't get notifications for profile messages so PMs or shooting me an email at kenleung1995 at hotmail dot com is the best way to reach me. I also check my threads every once in a while so I'll usually see your posts. I can work with you on the price for some of these and I'm open to trades. If you don't have much feedback or forum history, I might ask you to ship first. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. The knives will come with what's shown unless otherwise stated. Thanks for taking a look.

For trades, I'm looking for: Grahams, Ochs, Yunas, Marlowes, Tashi collabs and customs, GTCs, Sharknivcos, RJ Martins, Dalibors, Careys, Black Snow Customs, VanderMeulens, Goodwyns, Rotten Designs, ZT 0454, G&G Deadlock, an older full thickness Direware, Rockstead Shun, Skiffs, and maybe a custom Emerson or Strider but I'll always be open to other offers. I like seeing what's out there and the worst I can do is pass. Cash can be added either way.

1. Mick Strider Custom Stub - near mint - $2300
The shrunk down version of the MSC XL that turns it into an overbuilt 3.25” SnG
CPM-20CV
A slightly different style Yeti grind blade where he maximized the blade flat
Mirrorwashed flats and satin grinds
Full dragon spine
Magic anodized frame that changes color as you handle it
Glass smooth action, perfect centering, good lockup

rLVIObK.jpg


L6NPBn5.jpg


8gO1b95.jpg


jiHdXqE.jpg


mqmpnIE.jpg


UbxEf5l.jpg


GUXGdWQ.jpg


2. Kirby Lambert Orion MGT - near mint - $1600
3.5" blade with the asymmetrical Multi Grind Tanto he's known for
Bolsters are made from some of the best finished lightning strike CF I've seen, zero voids and not a single wire poking out
Spalted maple scales
Blasted bronzed ti liners
Deep carry clip
Moonglow inlaid thumpstud
Fit and finish is spot on perfect
Transitions between materials are seamless
Runs smoother than a Sebenza, locks with zero play, and centering is dead on

EaTJoGy.jpg
TEKlZdH.jpg


yUT3t8T.jpg
gb8uHra.jpg


cuQhhr1.jpg
g24HZVG.jpg


VjdSIAW.jpg


3. Greg Lightfoot M1 - near mint - $750
Old school perfectly built Lightfoot
3.25" BG-42 blade with a 2-tone satin and Greg's signature deep asymmetrical top swedge
Cool ergonomics on this one, you get a lot of reach out of that 3.25" blade
Matte finished contoured CF scales with 4 brass pins inlaid on the lockside
Blasted ti liners
Shark tooth engraved clip
Custom thumbstud, spacers, and pivot
Has a mark on the front of the blade and has some dried up grease around the pivot and lock area
Great action, flicks open every time, solid lockup, and perfect centering

YsBbWrX.jpg
MgmTynH.jpg


VmHZGvw.jpg
bABWeJD.jpg


Nkz6rS9.jpg
GrjktOy.jpg
 
4. Philip Booth Destiny - lightly carried - $600
3.7" blade in CPM-154 with a reflective 2-tone hand satin
Contoured lightning strike carbon fiber scales with a copper stripe inlaid on both side
Polished liners
Hand satin clip with a copper standoff
Action is glass smooth, flips well, and locks up tight
Centering seems to favor the front side by a hair

wMHmh57.jpg


6U7R1rJ.jpg


iNGo7w0.jpg


4FJ6oXO.jpg


tXV4wSn.jpg


vMUFeNW.jpg


5. Jim Burke/Tashi Bharucha Villian Supersonic #3 - near mint - $2200
Jim only made 5-10 VSS's in collaboration with Tashi and this one is #3
Each one was a complete one off
This is one of the best built knives I've owned
Has a drop-shut smooth action on washers and it flips like a dream
Locks with no play in any direction
Symmetrical compound grind
Huge 4.25" blade but the knife overall is only about as think as a Sebenza so it carries easier than you would expect
Has a full length geared backspacer with a red tritium insert
The darker part on the blade by the pivot on the lockside is just oil

R31LPEN.jpg







NUm1pWd.jpg







1mmbLoj.jpg







ChcVffA.jpg







M0GyEL1.jpg







UlNetzn.jpg







5rpw44d.jpg






6. Aegis Knife Works Xiphos #8 - lightly carried - $800
3.75" compound ground tanto blade in CPM-3V
Contoured frame
Blue anodized pivot collar, lockbar stablizer, screws, frame standoffs, and clip standoffs
Centering is dead on and it flips well
Has a slight bit of play if you grab the blade but the knife is 100% safe
Feels great in hand

bHhzGFw.jpg







bY7OxVP.jpg







Xy28ehz.jpg







nKxps3r.jpg







4qEzgow.jpg
 
Status
Not open for further replies.
Back
Top