- Joined
- Apr 20, 2005
- Messages
- 776
MT26P will be available for sale on Monday, 07-Aug-2017 at 0900 (MDT)
All sales will be handled by the Spyderco Factory Outlet store online at http://spyderco.com. You will find it under model # MT26.
Cost: $69.95 each
Domestic Orders:
Domestic Shipping in the Continental United States: Standard Shipping rates apply.
Alaska, Hawaii, and Puerto Rico Shipping: USPS $15.00
International Orders:
International orders have a maximum allowed amount of $600 (including shipping fees) for all online orders. All orders over $600 must be placed via phone or e-mail and paid for via wire transfer. Shipment of orders paid for via wire transfer will not occur until monies have been received by the Spyderco Factory Outlet Store. You may contact our store to place a wire transfer order at sfo@spyderco.com or 303/279-8383 x 107.
International shipments will be sent out according to our International Shipping Schedule:
Shopping Cart Total: $0-$99 - Shipping/Handling Charge $25
Shopping Cart Total: $100-$399 - Shipping/Handling Charge $45
Shopping Cart Total: $400 and higher - Shipping/Handling Charge $60
International shipments will be via USPS International Priority Mail. Please be aware, we will have limited tracking capabilities. Tracking once it leaves the US is dependent upon the postal services outside the US and their ability to provide it. However, this will completely eliminate UPS Brokerage Fees.
About Micro-Melt A11 (PMA11):
Spyderco’s twenty-sixth Mule Team installment features Carpenter® Technology Corporation's Micro-Melt® A11, a particle metallurgy version of A11 tool steel. Also known as AISI A11, K294 (Böhler-Uddeholm), CPM® 10V (Crucible®), and PMA11 is an extremely wear-resistant tool steel that is capable of achieving a high working hardness. One of the world's premier steel choices for highly wear-resistant industrial tooling, in its CPM 10V form it is also one of the favorite steels of renowned custom knifemaker and Spyderco collaborator Phil Wilson.
PMA11's alloy composition is as follows: Carbon: 2.45%, Manganese: 0.50%, Silicon: 0.90%, Chromium: 5.25%, Molybdenum: 1.30%, Vanadium: 9.75%, Sulfur 0.07%. Its large volume of hard vanadium carbides provides substantially better wear-resistance than typical high-carbon, high-chromium die steels such as D2 and D7. In knife blades, this translates to outstanding edge retention and good toughness, especially in shorter knives. These properties are maximized through the particle metallurgy process, which greatly reduces alloy segregation and ensures a homogenous microstructure. Please note, however, that PMA11 is a tool steel and must be maintained properly to safeguard it against corrosion. PMA11 is an advanced alloy that offers excellent potential in high-performance cutlery applications.
Mule Team handle scales (MTGBK) and sheaths (MTLSH and MTSH) will also be available through SFO (sold separately).
What is the Mule Team:
For those of you unfamiliar with our Mule Team Project, it is unique to Spyderco. In-house we call knife samples designed and built for testing and evaluation Mules. We know a healthy percentage of knife users are interested in different blade steels and their performance abilities. Running with that, we released an ongoing Mule Team Project. Several times per year we unveil the same single-piece fixed blade patterned knife in a different and exotic blade steel. This lets steel-obsessed knife knuts test, try and use something normally not offered to the industry. Product runs are limited to 600 – 1000 pieces of each steel type depending on foundry requirements.
Mule Blades are leaf-shaped with a sharpened and finished PlainEdge blade but with an unfinished handle providing a do-it-yourself opportunity. The unfinished handle has a series of holes for attaching custom handle scales or for wrapping with para-cord. Each piece is sold without handle scales or a carry sheath focusing the project on the blade steel. This opens endless creative possibilities for the owner to design their own handle scale and carry options.
All sales will be handled by the Spyderco Factory Outlet store online at http://spyderco.com. You will find it under model # MT26.
Cost: $69.95 each
Domestic Orders:
Domestic Shipping in the Continental United States: Standard Shipping rates apply.
Alaska, Hawaii, and Puerto Rico Shipping: USPS $15.00
International Orders:
International orders have a maximum allowed amount of $600 (including shipping fees) for all online orders. All orders over $600 must be placed via phone or e-mail and paid for via wire transfer. Shipment of orders paid for via wire transfer will not occur until monies have been received by the Spyderco Factory Outlet Store. You may contact our store to place a wire transfer order at sfo@spyderco.com or 303/279-8383 x 107.
International shipments will be sent out according to our International Shipping Schedule:
Shopping Cart Total: $0-$99 - Shipping/Handling Charge $25
Shopping Cart Total: $100-$399 - Shipping/Handling Charge $45
Shopping Cart Total: $400 and higher - Shipping/Handling Charge $60
International shipments will be via USPS International Priority Mail. Please be aware, we will have limited tracking capabilities. Tracking once it leaves the US is dependent upon the postal services outside the US and their ability to provide it. However, this will completely eliminate UPS Brokerage Fees.
About Micro-Melt A11 (PMA11):
Spyderco’s twenty-sixth Mule Team installment features Carpenter® Technology Corporation's Micro-Melt® A11, a particle metallurgy version of A11 tool steel. Also known as AISI A11, K294 (Böhler-Uddeholm), CPM® 10V (Crucible®), and PMA11 is an extremely wear-resistant tool steel that is capable of achieving a high working hardness. One of the world's premier steel choices for highly wear-resistant industrial tooling, in its CPM 10V form it is also one of the favorite steels of renowned custom knifemaker and Spyderco collaborator Phil Wilson.
PMA11's alloy composition is as follows: Carbon: 2.45%, Manganese: 0.50%, Silicon: 0.90%, Chromium: 5.25%, Molybdenum: 1.30%, Vanadium: 9.75%, Sulfur 0.07%. Its large volume of hard vanadium carbides provides substantially better wear-resistance than typical high-carbon, high-chromium die steels such as D2 and D7. In knife blades, this translates to outstanding edge retention and good toughness, especially in shorter knives. These properties are maximized through the particle metallurgy process, which greatly reduces alloy segregation and ensures a homogenous microstructure. Please note, however, that PMA11 is a tool steel and must be maintained properly to safeguard it against corrosion. PMA11 is an advanced alloy that offers excellent potential in high-performance cutlery applications.
Mule Team handle scales (MTGBK) and sheaths (MTLSH and MTSH) will also be available through SFO (sold separately).
What is the Mule Team:
For those of you unfamiliar with our Mule Team Project, it is unique to Spyderco. In-house we call knife samples designed and built for testing and evaluation Mules. We know a healthy percentage of knife users are interested in different blade steels and their performance abilities. Running with that, we released an ongoing Mule Team Project. Several times per year we unveil the same single-piece fixed blade patterned knife in a different and exotic blade steel. This lets steel-obsessed knife knuts test, try and use something normally not offered to the industry. Product runs are limited to 600 – 1000 pieces of each steel type depending on foundry requirements.
Mule Blades are leaf-shaped with a sharpened and finished PlainEdge blade but with an unfinished handle providing a do-it-yourself opportunity. The unfinished handle has a series of holes for attaching custom handle scales or for wrapping with para-cord. Each piece is sold without handle scales or a carry sheath focusing the project on the blade steel. This opens endless creative possibilities for the owner to design their own handle scale and carry options.
