- Joined
- Jan 20, 2013
- Messages
- 360
Today I have quite a few everyday carry items and aftermarket knife parts for sale since I am looking to slim down on items I no longer use or need. Unless otherwise stated all items have been gently used but not abused. No items will come with a box. I am not interested in any trades and I will only ship to CONUS, HI, AK so no international buyers. Prompt payment via PayPal Goods and Services is expected and all prices include the PayPal fees and shipping via US Postal Service with a tracking number. I should be able to ship today or tomorrow. The first “I’ll take it” followed by prompt payment receives the item.
If you have any questions ,want to see additional pictures of an item or want to discuss multiple purchases feel free to send me a PM or email me at:
( without any spaces)
If you email me be sure to include your bladeforums username
Leatherman Signal, coyote brown with the updated nylon sheath. $SOLD
This multitool was carried a few times and gently used. The fire rod has not been used and the knife sharpener is currently wrapped in electrical tape and mounted on the tool. I did this so the diamond sharpener wouldn’t rub on my phone or anything else in my pocket and scratch up the screen, etc. Does not come with box.
Leatherman Blast (satin) and Leatherman Wave (black oxide) - $SOLD
These multitools were used and carried on a daily basis for years. The Blast had some rust in the internals and I managed to get rid of what I could see, there could be more in the deeper parts of the tool. Any residue on both of these tools is from the rust remover. The bottom of the can opener is chipped, I’m not sure if it would still work and the flat small removable phillips/flat head driver has a chip on the flathead side. Wave is in perfect functioning condition, I only want to sell it because I just got the Wave Plus. No sheaths come with these tools.
U.S. Army Issued Gerber MP600, Black - $SOLD
This mulitool is like new and has never been used or carried; still having oil from the factory. I was issued this mulitool but favored my Leathermans. Comes with issued coyote brown nylon sheath and torx head to rotate the removable wir e cutters.
Spyderco Paramilitary 2 Olive Drab G10 Hexagon Putman Scales - $SOLD
I got these scales of Bladeforums and I mounted them on a PM2. The scales are in good condition and are drilled for right hand tip up only.
Benchmade Large Grip Wilkins Peel Ply Black G10 Scales - $50
These scales have some baggage, the coating on hardware where the screws thread into are brass colored from their original black. I am the second owner, bought from Bladeforums. As for the backspacer, well that’s why the price is so low. It was originally black and cog shaped but once the paint started to wear I tried to remove the coating and well not it doesn’t look anything like what it once was. It will still mount but I didn’t like the look of it so I am moving it along. I would recommend these for someone who just wants to add some more scales to supplement a pair of Wilkins scales you already own, or you’re a wizard with the file or dremel and you can bring the backspacer from the brink. Comes with mounting screws and hex key to mount the pocket clip screws. Drilled for left hand and right hand tip up carry.
Benchmade Large Grip Putman Grooved Black G10 Scales - $55
I bought these scales from bladescales.com and mounted them on my grip. These scales are in excellent condition and come with all hardware. These are drilled for right hand carry tip up only.
Mini Griptilian Putman Classic Hex Black G10 Scales - $SOLD
I bought these scales from bladescales.com and mounted them on my mini grip. These scales are in excellent condition and come with all hardware and the cog backspacer. These are drilled for right hand carry tip up only.
Hinderer XM-18 3.0 Scales - $50 each, all scales have been mounted and are in excellent condition. All G10 scales have Hinderer horse emblem on the liner side. These scales have been successfully mounted on gen 4 and tri-way pivot models.
Blue/black g10
Green/black g10
Orange g10
Tan micarta from RC bladeworks SOLD
OD green micarta from RC bladeworks
Hinderer XM-18 3.0 complete black hardware set - $55
2 pivot screws, 3 standoffs, 3 presentation side screws, 3 clip side female threads, lockbar stabilizer and screw, and 9 clip screws. Very little wear on all hardware.
Hinderer XM-18 3.0 complete working finish set - $70
1 pivot screw, 3 standoffs, 3 presentation side screws, 3 clip side female threads, lockbar stabilizer and screw, and 6 acid etched clip screws. Very little wear on all hardware.
Link to my Spyderco Aqua Salt sale posting: https://www.bladeforums.com/threads/spyderco-aqua-salt-priced-to-sell.1621179/
If you have any questions ,want to see additional pictures of an item or want to discuss multiple purchases feel free to send me a PM or email me at:
( without any spaces)
If you email me be sure to include your bladeforums username
Leatherman Signal, coyote brown with the updated nylon sheath. $SOLD
This multitool was carried a few times and gently used. The fire rod has not been used and the knife sharpener is currently wrapped in electrical tape and mounted on the tool. I did this so the diamond sharpener wouldn’t rub on my phone or anything else in my pocket and scratch up the screen, etc. Does not come with box.
Leatherman Blast (satin) and Leatherman Wave (black oxide) - $SOLD
These multitools were used and carried on a daily basis for years. The Blast had some rust in the internals and I managed to get rid of what I could see, there could be more in the deeper parts of the tool. Any residue on both of these tools is from the rust remover. The bottom of the can opener is chipped, I’m not sure if it would still work and the flat small removable phillips/flat head driver has a chip on the flathead side. Wave is in perfect functioning condition, I only want to sell it because I just got the Wave Plus. No sheaths come with these tools.
U.S. Army Issued Gerber MP600, Black - $SOLD
This mulitool is like new and has never been used or carried; still having oil from the factory. I was issued this mulitool but favored my Leathermans. Comes with issued coyote brown nylon sheath and torx head to rotate the removable wir e cutters.
Spyderco Paramilitary 2 Olive Drab G10 Hexagon Putman Scales - $SOLD
I got these scales of Bladeforums and I mounted them on a PM2. The scales are in good condition and are drilled for right hand tip up only.
Benchmade Large Grip Wilkins Peel Ply Black G10 Scales - $50
These scales have some baggage, the coating on hardware where the screws thread into are brass colored from their original black. I am the second owner, bought from Bladeforums. As for the backspacer, well that’s why the price is so low. It was originally black and cog shaped but once the paint started to wear I tried to remove the coating and well not it doesn’t look anything like what it once was. It will still mount but I didn’t like the look of it so I am moving it along. I would recommend these for someone who just wants to add some more scales to supplement a pair of Wilkins scales you already own, or you’re a wizard with the file or dremel and you can bring the backspacer from the brink. Comes with mounting screws and hex key to mount the pocket clip screws. Drilled for left hand and right hand tip up carry.
Benchmade Large Grip Putman Grooved Black G10 Scales - $55
I bought these scales from bladescales.com and mounted them on my grip. These scales are in excellent condition and come with all hardware. These are drilled for right hand carry tip up only.
Mini Griptilian Putman Classic Hex Black G10 Scales - $SOLD
I bought these scales from bladescales.com and mounted them on my mini grip. These scales are in excellent condition and come with all hardware and the cog backspacer. These are drilled for right hand carry tip up only.
Hinderer XM-18 3.0 Scales - $50 each, all scales have been mounted and are in excellent condition. All G10 scales have Hinderer horse emblem on the liner side. These scales have been successfully mounted on gen 4 and tri-way pivot models.
Blue/black g10
Green/black g10
Orange g10
Tan micarta from RC bladeworks SOLD
OD green micarta from RC bladeworks
Hinderer XM-18 3.0 complete black hardware set - $55
2 pivot screws, 3 standoffs, 3 presentation side screws, 3 clip side female threads, lockbar stabilizer and screw, and 9 clip screws. Very little wear on all hardware.
Hinderer XM-18 3.0 complete working finish set - $70
1 pivot screw, 3 standoffs, 3 presentation side screws, 3 clip side female threads, lockbar stabilizer and screw, and 6 acid etched clip screws. Very little wear on all hardware.
Link to my Spyderco Aqua Salt sale posting: https://www.bladeforums.com/threads/spyderco-aqua-salt-priced-to-sell.1621179/
Last edited:
